MEAN WELL SKE15 Series 15W DC-DC Regulated Single Output Converter Owner’s Manual
- June 13, 2024
- MEAN WELL
Table of Contents
MEAN WELL SKE15 Series 15W DC-DC Regulated Single Output Converter
Product Information
The SKE15 series is a 15W DC-DC Regulated Single Output Converter. It features a 2:1 wide input range, with an option for a 4:1 wide input range. The converter provides 1000VDC I/O isolation, with an option for 3000VDC I/O isolation. It has a built-in EMI filter and offers short circuit and overload protections. The converter operates by cooling through free air convection and is enclosed in a six-sided shield metal case. It undergoes a 100% burn-in test to ensure high reliability. The SKE15 series is FCC, EAC, CE, and UKCA approved.
| Order No. | DC Voltage | Current Range | Rated Power | Ripple & Noise (max.) |
|---|---|---|---|---|
| SKE15A-05 | 5V | 300 ~ 3000mA | 15W | 50mVp-p |
| SKE15B-05 | 12V | 125 ~ 1250mA | 15W | 60mVp-p |
| SKE15C-05 | 15V | 100 ~ 1000mA | 15W | 60mVp-p |
| SKE15A-12 | 24V | 62.5 ~ 625mA | 15W | 80mVp-p |
| SKE15B-12 | ||||
| SKE15C-12 | ||||
| SKE15A-15 | ||||
| SKE15B-15 | ||||
| SKE15C-15 | ||||
| SKE15A-24 | ||||
| SKE15B-24 | ||||
| SKE15C-24 |
Product Usage Instructions
1. Ensure that the input voltage is within the specified range for the desired DC voltage output.
2. Connect the positive terminal of the input voltage (+Vin) to the corresponding pin on the converter. Connect the negative terminal of the input voltage (-Vin) to the corresponding pin on the converter.
3. Connect the positive terminal of the output voltage (+Vout) to the desired load. Connect the negative terminal of the output voltage (-Vout) to the desired load.
4. If necessary, use a fuse to provide additional protection for the converter.
5. Make sure to prevent the converter from operating in overload or short circuit conditions for more than 30 seconds.
6. The working temperature should be within the specified range. Avoid exposing the converter to extreme temperatures or humidity.
7. The converter meets safety standards and provides isolation resistance. It is recommended to comply with EMC regulations.
Features
- 2:1 wide input range
- 4:1 wide input range(option)
- 1000VDC I/O isolation
- 3000VDC I/O isolation(option)
- Built-in EMI filter
- Protections: Short circuit / Overload
- Cooling by free air convection
- Six-sided shield metal case
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / EAC / CE / UKCA
- 2 years warranty
Specifications
Mechanical Specification
Dimensions
Pin Configuration
Derating Curve
NOTE
- All parameters are specified at normal input, rated load, 25°C 70% RH ambient.
- Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0. 1uf & 47uf capacitor.
- Line regulation is measured from low line to high line at rated load.
- Load regulation is measured from 10% to 100% rated load.
- Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.
Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>