ADAMS HU Series Gas Burners Owner’s Manual
- August 14, 2024
- ADAMS
Table of Contents
ADAMS HU Series Gas Burners
HU UPSHOT AND HA INSHOT BURNERS
Rugged cast iron adjustable venturi – places the flame in the optimum location for oil furnaces. The readily removable pilot, flame spreader, and pilot lighter. Durable pre-drilled steel mounting flange – for easy mounting. Optional adjustable orifice is available. Gas Saver model available – pilot light is on only during the heating cycle. Optional collar flange reduces tube length.
SPT ECONOMY UPSHOT BURNER
Adjustable venturi length and height – places flame in the optimum location for virtually all coal furnaces or boilers. Rugged cast iron flame spreader. Extremely compact design – fits where other burners will not. Trim plate mounting for ease of installation. Optional adjustable orifice, extra length riser available. Gas Saver model available – pilot light is on only during the heating cycle.
HP–SPACESAVER POWER BURNER
COMPACT DESIGN – SAVES SPACE – ADJUSTABLE ORIFICE
Fits the smallest enclosures. Easily accessible air and firing rate
adjustment. Completely factory-wired with motor, transformer, and terminal
block mounting on slide-out chassis. Slide out the gas valve and manifold.
Rugged steel mounting flange, 5″ or 8″ extension sleeve optional. Constant or
intermittent pilot.
G-2–POWER GAS BURNER
A revolutionary partial pre-mix system uses Adams’s unique eductor-venturi concept. High static pressure capabilities ensure firing even under adverse conditions. For dependable direct spark ignition, the burner uses a separate high-voltage transformer. A specially designed manifold permits external office changes without the need to disassemble the burner. Six different stainless steel flame retention heads are available to cover most input ranges.
GAS BURNERS
FORCED DRAFT GAS BURNERS
HP SERIES FORCED DRAFT CAPACITIES
THRU 3,000,000 B. T.U. Short flame for best performance in all applications.
Fires into long combustion chambers but also into shortest chambers. Increases
efficiency. Vacuum mixing method (Patent No. 3589845). Eliminates pulsation or
“lifting” Quieter operation. Smoother light off. Adjustable input with
regulator located in the gas valve. Flange or pedestal mounting. U.L. is
listed with Honeywell or Fireye controls. Controls to meet F.M., I.R.I.
(F.I.A.) or special local codes are also available.
- 1/3 H.P. 3450 R.P.M. Motor to HP-1000
- 1/2 H.P. 3450 R.P.M. Motor on HP-1500
- 3/4 H.P. 3450 R.P.M. Motor on HP-2500 and HP-3500
Low gas pressure design. Requires only 2.0″- 5.0″ W.C. pressure. Eliminates the need for elevated pressure.
Manufacturing Company
- 9790 Midwest Ave.
- Cleveland, Ohio 44125
- Telephone 216-587-6801
- FAX 216-587-6807
References
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Adams HVAC Parts - Select From 98 Models
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>