LOCKLY PGH123 Vision Connect Hub User Manual
- June 13, 2024
- LOCKLY
Table of Contents
LOCKLY PGH123 Vision Connect Hub
OVERVIEW
INSTALLATION INSTRUCTION
Set up an account by registering your Lockly in the Lockly app. Registration is also mandatory to activate your locks warranty.
- After successful registration, select “add a new device” (you can also get to this from the menu in the top left), select VISION CONNECT, and follow the step-by-step on screen instructions. You can also reference these steps on following pages.
- Before connecting Vision Connect Hub download the Lockly or LocklyPro app (please check which App is for your lock) on your smartphone. It is required to finish setup and to set the connection between hub and lock.
- Additionally, you’ll need the Activation Card with unique pre-paired QR code to your lock. The card is located in the packaging that your lock came in.
- This QR code can also be found at the bottom of Vision Connect Hub. Please keep it in a safe place—this QR code is required to complete the setup and will be required if you lose your smartphone or access code.
- IMPORTANT: Without the QR code you will not be able to reset your lock
- The Vision Connect Hub connects directly to your Wi-Fi router using the provided LAN cable. Choose an appropriate location for the hub for optimum performance (see below).
- For optimum connectivity, it is recommended that the hub be no further away from the lock than 100 feet, placed 3 feet (1 meter) off the ground.
- During the setup process position yourself between the lock and the Vision Connect hub—ideally no more than 100 feet (30 meters) apart. Ensure your iOS or AndroidTM device has both Bluetooth® and Wi-Fi enabled,
- TIP: Sometimes distances between hub and lock can vary due to circumstances. If you are having difficulty setting up optimal range of 100/ft or less, we’re here to help.
- Call our customer care team: (669) 500 8835, or visit Lockly.com/help for suggestions and troubleshooting tip.
- Ensure the TF card that comes with Vision Connect is properly inserted.
- Connect power cable and plug USB power adapter into outlet.
- Connect LAN cable to closest Wi-Fi router to the Lockly VisionTM lock (<100ft).
- Wait 2 minutes for hub to self calibrate.
- LEDs will turn RED and blinking yellow.
- Vsion Connect is now ready to connect to your iOS or AndroidTM device.
- See troubleshooting on next page if LEDs do not meet the described conditions.
VISION CONNECT STATUS & TROUBLESHOOTING
- Power interruption during firmware update may damage the Vision Connect hub.
- Do not interrupt or turn the power off while firmware update is in progress.
- Launch the Lockly or LocklyPro App and select “add a new device”, then select the device. You will be prompted to scan the QR code from the Activation Card or Vision Connect Hub (located at the bottom).
- IMPORTANT: make sure your Lockly lock has the latest firmware. Allow updates and follow instructions if prompted. For more info, visit: http://www.support.Lockly.com/faq/-
- NOTE: Power interruption during firmware update may damage the Vision Connect hub. Do not interrupt or turn the power off while firmware update is in progress.
TIPS:
- Remember to register for warranty.
- Allow your mobile phone to receive push notifications.
- Send in-app feedback if you encounter any issues while using the App.
- If you are having difficulty scanning the QR code, we’re here to help.
- Call our Lockly customer care team: (669) 500 8835 / visit Lockly.com/help ; contact LocklyPro Hotline 855-562-5599 or email prosales@lockly.com for suggestions and troubleshooting tips.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference
this device must accept any interference received, including interference that
may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC Radiation Exposure Statement
Vision Connect complies with FCC radiation exposure limits set forth for an
uncontrolled environment. It should be installed and operated with minimum
distance 20cm between the radiator & your body.
IC WARNING
This device contains license-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment meets the exemption from the routine evaluation limits in
section 2.5 of RSS-102. It should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.
WARNING: This product can expose you to chemicals including Lead, which
is known to the State of California to cause cancer. For more information go
to www.P65Warnings.ca.gov.
References
- Download Lockly App for iOS and Android | Lockly®
- Product Registration - Lockly Support Desk
- P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>