AEM 30-4406 BOOST PRESSURE GAUGE User Guide
- June 5, 2024
- AEM
Table of Contents
30-4406 BOOST PRESSURE GAUGE
QUICK START GUIDE
DIGITAL DISPLAY GAUGE
The AEM Digital Display Gauges are designed for easy installation and usability. The 30-4406 Boost Pressure Gauge kit comes with all the necessary components to install and use the gauge. Follow the instructions printed in this quick start sheet to install your gauge and start using it as soon as possible. Visit the “AEM Gauges” section of the AEM electronics forum for more information on the advanced features of this gauge. The forums can be accessed by clicking on the “FORUMS” link on the AEM home page, www.aempower.com.
Gauge Configuration : The gauge bezels are threaded onto the gauge cup.
Rotate the bezel in a counter-clockwise direction to remove it from the cup.
Once removed, the faceplate can be changed, and/or a different bezel can be
installed.
Electrical Connection: In order to use the gauge, only the red and black
wires need to be connected. The white and blue wires do not need to be
connected. Connect the red wire to switch +12V. Connect the black wire to a
known good ground. Plug the connector on the harness into the mating connector
on the sensor. See the connection diagram below.
The 30-4406 Kit Contains:
(1) Pressure Gauge assembly
(1) Pressure Sensor
(1) Pressure Cable
(4) Butt Connector
(1) Silver Bezel
(1) White Boost Pressure Faceplate
(1) Instructions
Sensor Installation: The AEM pressure sensor has 1/8″NPT external threads. Install the sensor into a bung with mating threads. Equation: PSIA=12.5(volts)-6.25 scale: .5v-4.5v = 0-50psia
Figure 1. Connection Diagram
ADVANCED ENGINE MANAGEMENT INC.
This product is legal in California for racing vehicles only and should never
be used on public highways. Advanced Engine Management, 2205 126th Street Unit
A Hawthorne, CA. 90250, Phone:
310-484-2322 Fax:
310-484-0152
Instruction Part Number: 10-4402, © 2006 Advanced Engine Management, Inc.
AEM Electronics Warranty
Advanced Engine Management Inc. warrants to the consumer that all AEM
Electronics products will be free from defects in material and workmanship for
a period of twelve months from the date of the original purchase. Products
that fail within this 12-month warranty period will be repaired or replaced
when determined by AEM that the product failed due to defects in material or
workmanship. This warranty is limited to the repair or replacement of the AEM
part. In no event shall this warranty exceed the original purchase price of
the AEM part nor shall AEM be responsible for special, incidental, or
consequential damages or costs incurred due to the failure of this product.
Warranty claims to AEM must be transportation prepaid and accompanied by a
dated proof of purchase. This warranty applies only to the original purchaser
of the product and is non-transferable. All implied warranties shall be
limited in duration to the said 12-month warranty period. Improper use or
installation, accident, abuse, unauthorized repairs, or alterations void this
warranty. AEM disclaims any liability for consequential damages due to breach
of any written or implied warranty on all products manufactured by AEM.
Warranty returns will only be accepted by AEM when accompanied by a valid
Return Merchandise Authorization (RMA) number. The product must be received by
AEM within 30 days of the date the RMA is issued.
Please note that before AEM can issue an RMA for any electronic product, it is
first necessary for the installer or end-user to contact the tech line at
1-800-423-0046 to discuss the problem.
Most issues can be resolved over the phone. Under no circumstances should a
system be returned or an RMA requested before the above process transpires.
AEM will not be responsible for electronic products that are installed
incorrectly, installed in a nonapproved application, misused, or tampered
with.
Any AEM electronics product can be returned for repair if it is out of the
warranty period. There is a minimum charge of $50.00 for inspection and
diagnosis of AEM electronic parts. Parts used in the repair of AEM electronic
components will be extra. AEM will provide an estimate of repairs and receive
written or electronic authorization before repairs are made to the product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>