InCarTec 9-CTSCT011 Dispatch Spacetourer Instruction Manual

InCarTec 9-CTSCT011 Dispatch Spacetourer

Product Information

• Product Name: 29-CTSCT011
• Application: Dispatch 2016> Spacetourer 2016>

Product Contents

1. Interface
2. Harness
3. Instruction

Prior to installation:

• Read the manual prior to installation.
• Technical knowledge is necessary for installation.
• The place of installation must be free of moisture and away from heat sources.
• Please ensure you use the correct tools to avoid damage to the vehicle or product.

Wiring Colour Codes

**Product Usage Instructions

**

Fitting Guide

1. Remove and disconnect the original head unit.

2. Connect the 12-way Molex connector of the head unit patch lead (supplied separately) to the interface.

3. Connect the opposite end of the head unit patch lead to the head unit steering wheel control input on the back of the aftermarket head unit. This may be a 3.5mm jack plug or a wire input depending upon the head unit brand being fitted. Please see the head unit installation manual for further information on where to connect.
   Important Note: This step must be completed before connecting power to the interface. Failure to do so may result in no steering wheel control function.

4. Connect the 14-way Molex connector to the interface.

5. Connect the male power/speaker ISO harness to the female power/speaker ISO harness from the aftermarket head unit. For aftermarket head units without an ISO connector, please refer to the wiring colors on Pg. 2.

6. Connect the female vehicle-specific connector to the male vehicle connector.

7. Test head unit for correct operation.

Steering Wheel Control Functions

1. Hang Up
2. Mute
3. Volume +
4. Short Press = Source
5. Long Press = Pick Up
6. Track +
7. Track –
8. Preset Up
9. Volume –

29-CTSCT011
CAN-Bus Steering Wheel Control Interface for Citroën Vehicles. NB: Does not support stop & start/on & off function, parking sensor on & off function, vehicle diagnostics menu, vehicle settings ie. headlights, welcome lights, follow me home, security, drivers attention warning, language, date & time settings.

Product Contents

1. Interface
2. Harness
3. Instruction

Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Please ensure you use the correct tools to avoid damage to the vehicle or product.

Wiring Colour Codes

FITTING GUIDE

1. Remove and disconnect the original head unit.

2. Connect the 12-way molex connector of the head unit patch lead (supplied separately) to the interface.

3. Connect the opposite end of the head unit patch lead to the head unit steering wheel control input on the back of the aftermarket head unit. This may be a 3.5mm jack plug or a wire input depending upon the head unit brand being fitted. Please see the head unit installation manual for further information on where to connect.
   Important Note: This step must be completed before connecting power to the interface. Failure to so do may result in no steering wheel control function.

4. Connect the 14 way molex connector to the interface

5. Connect the male power/speaker ISO harness to the female power/speaker ISO harness from the aftermarket head unit. For aftermarket head units without an ISO connector, please refer to the wiring colors on Pg. 2.

6. Connect the female vehicle-specific connector to the male vehicle connector. Test head unit for correct operation.

STEERING WHEEL CONTROL FUNCTIONS

1.  Hang Up
2. Mute
3. Volume +
4. Short Press = Source Long Press = Pick Up
5. Track +
6. Track –
7. Preset Up
8. Volume –

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>