EPSON HC2200 Full HD 1080p Projector Instructions

EPSON HC2200 Full HD 1080p Projector

Product Information

This product is a projector that allows you to update its firmware using a USB cable connected to a computer. By updating the firmware, you can ensure that your projector is running on the latest software version, which may include bug fixes and performance improvements.

Product Usage Instructions

1. Save the firmware file to your computer. Make sure not to change the file name, as it will prevent the firmware update from working.
2. Disconnect the power cord from the projector and ensure that all indicators on the projector are turned off.
3. Connect your computer to the projector using a USB-type B Mini cable. Plug the USB type-A connector into your computer and the USB type-B connector into the projector’s USB-B port or USB mini-B port.
4. While holding down the projector’s power button, connect the projector’s power cord. This will activate the projector’s update mode, indicated by all the indicators turning on.
5. Your computer will recognize the projector as a removable disk. Copy the .bin firmware file to the root of the Epson_PJ removable disk. Make sure not to copy any other files or folders to this disk.
6. Safely remove the USB device from your computer. If you are using a Mac OS X, perform ‘Remove EPSON PJ.
7. Disconnect the USB cable from both the projector and the computer. After approximately 20 seconds, all the projector’s indicators will start flashing, indicating that the firmware update is in progress.
8. Warning: Do not unplug the projector while the firmware is updating. Once the update is successfully completed, the projector will turn off and go into standby mode.
9. If the projector is not in standby mode, the firmware update has not finished. Wait for some more time and check again.
10. If the Direct Power On function is enabled, the projector will turn back on after the update (only for models with this function).

Verifying the Firmware Version:

1. Turn on the projector.
2. Press the menu button and navigate to the Info tab.
3. If the version number displayed in the Info menu has changed, it indicates that the firmware update has been completed successfully.
4. For more details on displaying the Info menu, refer to your projector’s online User’s Guide.

Procedure to update projector firmware

Procedure to update projector firmware with a USB cable from a computer

1. Save the firmware file to the computer a. Note: Do not change the file name of the firmware. If the file name changes, the firmware update will not work.
2. Disconnect the power cord from the projector and check that all the indicators on the projector are off.
3. Connect the computer to the projector with a USB-type B Mini cable.
   • Connect the USB type-A connector to the computer. Connect the USB type-B connector to the Projector’s USB-B port or USB mini-B port.
4. Connect the projector’s power cord while holding down the projector’s power button.
   • All the projector’s indicators will turn on (Update mode).
   • When all the indicators turn on release the [ ] power button.
5. The computer will recognize the projector as a removable disk.
   • From the computer, copy the .bin firmware file to the root of the Epson_PJ removable disk.
   • Do not copy any other files or folders to the removable EPSON_PJ disk.
   • Perform the steps to safely remove a USB device from the computer. If you are using a Mac OS X, perform ‘Remove EPSON PJ”.
6. Disconnect the USB cable from the projector and the computer. Once you disconnect the USB cable, after about 20 seconds all the projector’s indicators will start flashing, and the firmware update will begin writing to the projector.
   • Warning- Do not unplug the projector while the firmware is updating
   • After the update finishes successfully, the projector will turn off and go into standby status.
   • If the projector is not in standby status, the firmware update has not finished. Continue waiting, then check again.
   • If the Direct Power On function is set to On. the protector turns back on again (only for models with the Direct Power On function enabled).

Verifying the firmware version

1. Turn the projector on
2. Press the menu button and go to the Info tab
   • If the version number displayed in the Info menu has changed, the firmware update has been completed normally. See your projector’s online User’s Guide for details on displaying the Info menu.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>