AGFAPHOTO CC2700 Video Camera User Manual

AGFAPHOTO CC2700 Video Camera

About the Product

The CC2700 is a camcorder that allows you to capture photos and videos. The product comes with a lithium battery, USB cable, and a memory card slot. The camcorder has different modes such as photo, video, playback, and settings.

System Requirements
The videos and photos transfer must be done on a computer with the following configuration:

• Operating System – Windows XP/Vista/7/8/10 or Mac OS X 10.2 or later
• Processor – Pentium 4, 2.8 GHz or faster
• RAM – 1GB or more
• Hard Disk Space – 100MB or more
• USB Port – USB 2.0 or higher
• Intel ®Pentium 2.0 GHZ or higher
• Microsoft Windows XP or higher operating system
• 2 GB RAM
• 40 GB available disk memory
• Standard USB interface
• 1 GB graphics or higher
• 1024*768 pixels resolution or higher

Warning

Please format the memory card before using the camcorder. Do not remove or insert the memory card when recording, otherwise you could damage it or lose the files stored on it! Some memory cards may also cause the camcorder to crash or malfunction. It is recommended to use a memory card with C10 or higher transfer as storage medium.

Installing the Lithium Battery

1. Open the battery compartment by sliding its locking button.
2. Insert the battery into the dedicated slot in the correct polarity direction.
3. Close the battery compartment cover until you hear a click again indicating that it is securely closed.

Charging the Lithium Battery

To recharge the lithium battery of the camcorder, simply connect it to your computer with the USB cable provided in the box (without removing the battery). The red indicator light on the back of the camcorder will light to indicate that the battery is being charged, and will turn off when fully charged. You can also charge the battery by connecting the camcorder to AC if you have a charger with a USB port.

Powering On/Off the Camcorder

Press the Power button to turn on the camcorder. To turn it off, press it again for 3 seconds. If the battery is discharged, the message “Low” will appear on the screen indicating that the camcorder will automatically turn off in a few seconds.

Mode Switching

Press the Mode button to switch between set modes. The selected mode will appear on the screen as an icon. The available modes are photo, video, playback, and settings.

Connecting to a Computer

By connecting the camcorder to your computer, you can either transfer the files stored on the memory card (MSDC) or use it as a PC camera.

QR CODE

Camcorder description

Buttons functions

Start using

Inserting the memory card
The camcorder supports SD memory card up to 128 GB. It is necessary to insert a memory card before using it to store more photos or videos. When the battery is low or replaced, the media files stored on the memory card would not be lost. Please follow the instructions below to insert it properly:

1. Open the battery compartment by sliding its locking button.
2. As shown below, insert the memory card into the dedicated slot with the side of the metallic contact facing up and then push it in until hearing a click indicating that it has been well installed.
3. Close the battery compartment cover until you hear a click again indicating that it is securely closed.

Warning!
Please format the memory card before using the camcorder. Do not remove or the memory card when recording, otherwise you could damage it or lose the files stored on it! Some memory cards may also cause the camcorder crash or malfunction.It is recommended to use a memory card with C10 or higher transfer as storage medium.

Installing the lithium battery
Install the lithium battery supplied with the camcorder in the battery compartment following the instructions below:

1. Open the battery compartment by sliding its locking button.
2. As shown below, insert the battery into the dedicated slot in the correct polarity direction.
3. Close the battery compartment cover until you hear a click again indicating that it is securely closed.

Warning!
Please install the battery correctly, otherwise you may not be able to turn on the camcorder or damage it. Use a standard charger with adapter to connect it to an outlet with power supply of 100V-240V / 50-60HZ.

Charging the lithium battery
To recharge the lithium battery of the camcorder, simply connect it to your computer with the USB cable provided in the box (without removing the battery). The red indicator light on the back of the camcorder will light up to indicate that the battery is being charged, and will turn off when fully charged. You can also charge the battery by connecting the camcorder to AC power if you have an adapter to which you can connect the USB cable.

Powering on / off the camcorder
Press the Power button to turn on the camcorder. To turn it off, simply press it again for 3 seconds. If the battery is discharged, the message “Low power” will appear on the screen indicating that the camcorder will automatically turn off in a few seconds.

Mode switching
Press the Mode button to switch between photo, video, playback and setup modes. The selected mode will appear in the upper left corner of the screen as an icon.

Connecting to a computer
By connecting the camcorder to your computer, you can either transfer the files stored on the memory card (MSDC) or use it as a PC camera.

Plug the USB cable into the third interface on the back of the camcorder to connect it to your computer.

PC camera mode
Connect the camcorder to your PC as above.

The screen will then display:

Press Up/ Down button to choose “PC Camera” and press OK button to switch to PC camera mode.

Connecting an external microphone
To get a better audio, you can connect an external microphone via the MIC port and fix it to the hot shoe if it has an adapter.

Video mode
In video mode, you can shoot video clips and store them only on the memory card. Here is the signification of each icon appearing on the screen in video mode:

Photo mode
In photo mode, you can take pictures and store them in the internal memory of the camcorder or on the memory card. Here is the signification of each icon appearing on the screen in video mode:

Zoom
The camcorder has a digital zoom function allowing you to enlarge your shot up to 18 times. Slide the Zoom button to the right (T) to zoom in, thenslide it to the left (W) to zoom out.

Using the LED supplementary lighting
In low light conditions, it is better to use the LED light built into the front of the camcorder above the lens. Press the LED button (or Power button) to turn on the LED lighting, an icon will then appear on the screen to indicate that it is well on.

Note : you can turn the LED lighting on and off when photo shooting or video recording.

Using the camcorder

This section helps you understand how to enjoy all the features of the camcorder. To record videos, first press the Mode button to switch to video mode. The corresponding icon will then appear in the upper left corner of the screen.

1. According to the image displayed on the screen, first adjust the shot focus and then press the Record / OK button to start a video recording. A red dot icon will then blink at the top of the screen indicating that video recording is in progress.
2. To pause it, press the shutter button once and then press it again to resume recording. To stop recording definitively, press the Record/OK button only once.
3. Video files are automatically saved to the memory card once their recording is finished. It is better to set the video mode settings up before recording, the following paragraphs give explanations about the various settings for the video mode.

Scene
The camcorder has a multiple choice of preset scenes for you to adapt the shooting to the environment in which you find yourself.

1. In video mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down Button to select a scene from the following options: Auto / Night / Portrait / Landscape / Backlight / Sport / Party / Beach / High Sensitivity / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Resolution
The camcorder has a multiple choice of video resolution. The higher the resolution, the sharper the video and the larger the document, the more space it occupies on the memory card.

1. In video mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select a resolution from the following options: 2.7K/ FHD / HD / VGA / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Face beauty
This function allows you to optimize images automatically and brighten teeth whitening.

1. In video mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: On / Off / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Exposure
This setting allows you to adjust the brightness of a video according to the brightness of the environment in which you shoot it.

1. In video mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select an exposure value from the following exposure options: +3 / +2 / + 1/0/ – 11-2/-3.
5. Finally press the OK button to save and return to the previous menu.

White balance
This function allows you to adjust the color deviation of a video according to the light source.

1. In video mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options:Auto / Daylight / Cloudy / Fluorescent / Tungsten / Cancel.
5. Finally press the OK button to save and return to the previous menu.

ISO
This function allows you to adjust the video sensitivity if the shooting brightness is low. It is recommended to set it up to Automatic.

1. In video mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: Auto / 100 / 200 / 400 / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Effect
This setting allows you to give a fancy effect to a video by adding a filter.

1. In video mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following effect options Normal / B & W / Sepia / Red / Green / Blue / Sunset / Warm / Cool / Over Exposed / IR / Binary / Vivid / Undertone / Dog Eye / Aibao / Gothic / Japan style / LOMO / Negative / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Sharpness
This setting allows you to adjust the sharpness of a video so that the edges of the image are clearer and more precise.

1. In video mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down Buttons to select from the following sharpness options: Soft / Normal / Sharp.
5. Finally press the OK button to save and return to the previous menu.

Photo shooting

This section explains how to use the photo mode of the camcorder. To take photos, first press the Mode button to switch to photo mode. The corresponding icon will then appear in the upper left corner of the screen.

1. According to the image displayed on the screen, first adjust the shot focus and then press the Shutter button to take a picture. The number of photos taken in each resolution ratio will be displayed in the upper right corner of the screen.
2. When the message “Memory full” appears on the screen, it means that the SD memory card is full and you need to replace it to continue taking pictures. The number of pictures taken depends on the size of the memory card and the selected resolution, the higher the resolution, the more memory is occupied. It is better to set the photo mode settings up before taking photos, the following paragraphs give explanations about the various settings for the photo mode.

Scene
The camcorder has a multiple choice of preset scenes for you to adapt the shooting to the environment in which you find yourself.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down Button to select a scene from the following options : Auto / Night / Portrait / Landscape / Backlight / Sport / Party / Beach / High Sensitivity / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Resolution
The camcorder has a multiple choice of photo resolution. The higher the resolution, the better the quality of the photo and the larger the size of the photo.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select a resolution from the following options: 2MHD / 5M / 7MHD / 8M / 12M / 16M / 20M / 24M / 30M.
5. Finally press the OK button to save and return to the previous menu.

Face beauty
This function allows you to optimize images automatically and brighten teeth whitening.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: On / Off / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Continuous shooting
This function allows you to take up to 3 pictures in quick succession after only pressing the Shutter button once.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: Single / Continuous.
5. Finally press the OK button to save and return to the previous menu.

Self-timer
When the self-timer is on, the picture is taken a few seconds after the shutter button is pressed.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: 2 sec. / 5 sec. / 10 sec. / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Exposure
This setting allows you to adjust the brightness of a video according to the brightness of the environment in which you shoot it. In very low light conditions, the function setting is not possible.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select an exposure value from the following exposure options: +3 / +2 / + 1 / 0 / – 1 / -2 / -3.
5. Finally press the OK button to save and return to the previous menu.

White balance
This function allows you to adjust the color deviation of a photo according to the light source.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: Auto /Daylight / Cloudy / Fluorescent / Tungsten / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Quality
This function allows you to define the quality of a photo.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following quality options: Super Fine / Fine / Normal.
5. Finally press the OK button to save and return to the previous menu.

Sharpness
This setting allows you to adjust the sharpness of a video so that the edges of the image are clearer and more precise.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down Buttons to select from the following sharpness options: Soft / Normal / Sharp.
5. Finally press the OK button to save and return to the previous menu.

Effect
This setting allows you to give a fancy effect to a photo by adding a filter.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following effect options: Normal / B & W / Sepia / Red / Green / Blue / Sunset / Warm / Cool / Over Exposed / IR / Binary / Vivid / Undertone / Doq Eye / Aibao / Gothic / Japan style / LOMO / Negative / Cancel.
5. Finally press the OK button to save and return to the previous menu.

ISO
This function allows you to adjust the video sensitivity if the shooting brightness is low. It is recommended to set it up to Automatic.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: Auto / 100 / 200 / 400 / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Anti-shake
This fonction allows you to stabilize shooting to avoid taking blurry photos.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: On / Off I Cancel.
5. Finally press the OK button to save and return to the previous menu.

Files playback

This section explains how to view your photo and video files via the playback mode of the camcorder. After taking pictures and recording videos, press the Mode button to enter playback mode.

Photo playback and related operations
Besides browsing the photos stored on the memory card, it is also possible to zoom in / out on a photo and view the photos in thumbnails.

1. Browse through the photo files: press the Up / Down buttons to move from one photo to another.
2. Zoom in / out on the photo: push the Zoom button to the right to zoom in on the selected photo.
3. Enter / Exit thumbnail display: push the Zoom button to the left to activate thumbnail display. Then press the Up / Down buttons to move left or right and select the photo or video file you want to view. Finally, press the OK button to display it in full screen.

The playback mode not only allows you to view photos stored on the memory card of the camcorder, but also to rotate, protect, delete and view them as a slide show.

Delete
This function allows you to delete unwanted photos to free up more memory. You can do this file by file or delete all the unprotected images stored on the memory card at once.

1. In playback mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following deletion options: This image / AIl / Cancel.
5. Press the OK button to confirm operation and choose whether you want to delete the photo (s) again: Yes / No.
6. Finally press the OK button to confirm execution and return to the previous menu.

Protect
This function allows you to protect a photo from any accidental deletion. To delete a locked photo, remember to deactivate its protection before.

1. In playback mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following protection options: Lock this/ Unlock this/ Lock all / Unlock all.
5. Finally press the OK button to confirm execution and return to the previous menu

Rotate
This function allows you to rotate a photo.

1. In playback mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following rotation angles: 90° / 180° / 270°.
5. Finally press the OK button to confirm execution and return to the previous menu.

Slide show
This function allows you to view your photos in a slideshow.

1. In playback mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down Buttons to select the viewing time for each photo: 3 sec. / 5 sec. / 10 sec.
5. Finally press the OK button to confirm execution and return to the previous menu.

Video playback and related operations
The playback mode not only allows you to play back videos stored on the memory card of the camcorder, but also to protect and delete them.

1. In playback mode, press the Up / Down buttons to select the video file to be viewed.
2. Then press the Record / OK button to play the selected file.
3. Press again this button to pause or resume video playback.

Delete
This function allows you to delete unwanted videos to free up more memory. You can do this file by file or delete all the unprotected videos stored on the memory card at once.

1. In photo mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following deletion options: This video / AIl / Cancel.
5. Press the OK button to confirm operation and choose whether you want to delete the video (s) again: Yes / No.
6. Finally press the OK button to confirm execution and return to the previous menu.

Protect
This function allows you to protect a video from any accidental deletion. To delete a locked video, remember to deactivate its protection before.

1. In playback mode, press the Menu button to display its configuration menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following protection options: Lock this / Unlock this / Lock all / Unlock all.
5. Finally press the OK button to confirm execution and return to the previous menu.

Setup

The setup mode allows you to define basic settings such as language, date, time, sound, frequency, as well as power saving, formatting and restoring the default settings of the camcorder. The handlings are the same as those done for playback mode setting.

Language
The software of this camcorder has several translations so you can set it up to your language.

1. Press the Mode button to enter the setup mode and access the settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select the desired language from the following options: English / French / German / Spanish / Italian /  Portuguese / Dutch / Polish / Hungarian / Czech / Russian / Simplified Chinese / Traditional Chinese / Japanese.
5. Finally press the OK button to save and return to the previous menu.

Date and time setting
This setting allows you to set the date and time of the camcorder.

1. Press the Mode button to enter the setup mode and access the settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons again to select “Date Setting” on the right.
5. Press the Up / Down buttons again to scroll through the data and then press the OK button to switch between “YY / MM / DD / h / min / sec”.
6. Finally press the OK button to save and return to the previous menu.

Note : it is also possible to activate or deactivate the display of the date and time in the submenu of this setting.

Power save
This setting allows you to automatically turn off the camcorder after a few moments if you do not use it anymore to save battery charge.

1. Press the Mode button to enter the setup mode and access the settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: 1 min. / 3 min. / 5 min. / Off.
5. Finally press the OK button to save and return to the previous menu.

Sound
This setting allows you to turn on / off the voice instructions of the camcorder.

1. Press the Mode button to enter the setup mode and access the settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following options: On / Off / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Frequency
This setting allows you to prevent the image from blinking when the lighting conditions for shooting are low.

1. Press the Mode button to enter the setup mode and access the settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following frequency options: 60Hz / 50Hz / Cancel.
5. Finally press the OK button to save and return to the previous menu.

Formatting
This function allows you to format the camcorder and the memory card by deleting all the files stored on them. Since deleted files cannot be restored, please use this function with caution.

1. Press the Mode button to enter the setup mode and access the settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to choose to launch formatting: Yes / No.
5. Confirm execution again: Yes / No.
6. Finally press the OK button to save and return to the previous menu.

Default settings
If the setup of the camcorder become too complex and the camcorder no longer works properly, use this function to restore the factory default settings. The date will not be deleted from the camcorder or memory card.

1. Press the Mode button to enter the setup mode and access the settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to choose to restore the default settings: Yes / No.
5. Confirm execution again: Yes / No.
6. Finally press the OK button to validate and return to the previous menu.

Screen touch correction
The touch correction of this camcorder was initially set in the factory. If you notice a loss of touch control or other disordered reactions, please perform a touch correction to solve the problem.

1. Press the Mode button to enter the setup mode and access the settings menu.
2. Then press the Up / Down buttons to select this setting.
3. The “+” sign will appear successively in all the corners of the screen and in the centre of the screen.
4. Press each “+” sign to correct the touch screen.
5. When the operation is completed, “Save” will appear on the screen, indicating that the touch screen is saving the latest touch correction data.
6. You can now control the camcorder directly from the screen.

Technical specifications

/ HD (1280×720) / VGA (640×480)

Video sound| 18X digital zoom
Screen| YES
LED light range| Sensor
White balance| YES
---|---
Ex

tion

| 3.0″ IPS
Self-timer| <1.0m
PC interface| Auto / Sunlight / Cloudy / Fluorescent / Tungsten
External mic| -3.0EV～+3.0EV
Auto            off| Off, 2s, 5s, 10s
Power| USB 2.0
Dimension| YES

Common problems and solutions

Device does not

on

| Battery not

yinstalled

| Correctly install the battery according to the manual instructions or fully charge it

Sudden shutdown

| ****

Battery discharged

| Switch the device on and

off several times or fully charge the battery

Photos or videos can not be saved| Power

saving function activated

| When the battery

indicator becomes red, charge immediately the battery or ce it by a new one

Ambiguous focus| Battery discharged| Immediately charge the

battery or             it by a new one

Memory card can not be used| Power has been

int        ted before saving

| Shooting in focus range

Inaction all buttons

| Shooting out of focus range| Remove the                         tection from the memory card or format it

DISPOSAL

Notice of compliance for the European Union:
products bearing the CE mark comply with the applicable European directives and associated harmonised European standards.

Disposal of waste equipment by users in the European Union:
this symbol means that according to local laws and regulations, it is prohibited todispose of this product with household waste. Instead,it is your responsibility to protect the environment and human health by handing over your used device to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

After sales service

• aftersaleservice@gtcompany.fr
• + 33 (0) 1.85.49.10.26

GT COMPANY UK LTD – 11 Old Jewry – EC2R 8DU London – United Kingdom AgfaPhoto is used under license of Agfa-Gevaert NV. For this product a sublicense has been granted by AgfaPhoto Holding GmbH (www.agfaphoto.com) . Neither Agfa-Gevaert NV nor AgfaPhoto Holding GmbH manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer.

References

• support.agfaphoto-gtc.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>