Dongguan Boxinda Electronic Technology B-23 Foldable 3 In 1 Wireless Charger User Manual
- June 13, 2024
- Dongguan Boxinda Electronic Technology
Table of Contents
Dongguan Boxinda Electronic Technology B-23 Foldable 3 In 1 Wireless
Charger
Product Information
| Product Name | Unknown |
|---|---|
| Model Number | Unknown |
| FCC Compliance | Part 15 of the FCC Rules |
| FCC Warning | This device complies with part 15 of the FCC Rules. Operation |
is subject to the following two conditions:
| 1. This device may not cause harmful interference.
| 2. This device must accept any interference received, including
interference that may cause undesired operation.
User Authorization| Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
Antenna Recommendations| – Reorient or relocate the receiving antenna.
| – Increase the separation between the equipment and
receiver.
| – Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
| – Consult the dealer or an experienced radio/TV technician for
help.
Radiation Exposure Limits| The equipment complies with FCC radiation exposure
limits set
forth for an uncontrolled environment. During the operation of the
device, a distance of 15 cm surrounding the device and 20 cm above
the top surface of the device must be respected.
Product Usage Instructions
To ensure proper usage and compliance with FCC regulations, please follow these instructions:
- Do not modify or make any changes to the device that are not expressly approved by the manufacturer or responsible party.
- Avoid causing harmful interference to other devices while using this device.
- If you experience undesired operation or interference, try the following:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a different circuit than the receiver.
- Consult the dealer or an experienced radio/TV technician for assistance.
- Respect the FCC radiation exposure limits by maintaining a distance of at least 15 cm around the device and 20 cm above its top surface during operation.
Product appearance
Foldable Operating Instructions
Instructions for use
- Please connect this wireless charger to the 5V3A, 9V/3A adapter throughthe Type- fast charging cable and connect the source
- Put the phone in the mobile phone charging area and the mobile phone can be charged
- Place the watch in the watch charging area to charge the watch
- Put the wireless charging Bluetooth earphone box in theearphone charging area to charge the earphone
LED status
Indicator description: The charging blue light and green light are on for
3 seconds to turn off the lamp, the charging mobile phone is on green for 20
seconds to turn off the lamp, and the charging headset is on blue light for 20
seconds to turn off the lamp
Notice!
in order to ensure the safe and efficient charging of the three devices at the
same time, it is recommended to use adapters and fast charging cablesabove
9V/2A or 9V/3A. (If the adapter is lower than 5V/2A, this charger willhave a
problem of stopping charging)
Precautions
Can only be used indoors or in a dry environment, avoid placing in high
temperature, humidity, strong static electricity and strong magnetic field
environment or use:
For your safety, please do not use wet hands to plug and unplug electrical
appliances; Keep out of reach of infants and children; Do not use the product
if it is contaminated with water or dirt. Non-professional personnel do not
open the repair without authorization.
Product parameters
- Model: B-23
- Input: 9V= 2A, 12V=2A
- Mobile phone output: 15W Max
- Headphone output: 5W
- Watch output: 2W
- Material: ABS+PC
- Color: black and white
Packing list
- Wireless charging stand:×1
- TYPE-C Charging Cable:×1
- Manual:×1
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.