BEITONG BTP-T6P2A ZEUS Pro Elite Gamepad User Manual
- June 13, 2024
- BEITONG
Table of Contents
BEITONG BTP-T6P2A ZEUS Pro Elite Gamepad
Button Introduction
Connect to Switch
- Bluetooth Connection
- Turn on the Switch, open up the [Controller and Sensors – Change Grip / Order] (This step can be ignored for non-first-time pai ring.)
- Make sure the controller power switch is OFF, press and hold the FN + LB and turn the power switch to ON until t he indicator light flashes in blue a nd then release.
- Connection is successful when controller vibrate, and the blue indicator light is always on
- Wired Connection
Connect to the Switch
-
1. Turn the controller power switch to ON. - Take out the OTG cable and connect one end to the Switch and t he other end to the controller.
- Connection is successful when controller vibrate, and the indicator light is always on.
Connect To The Switch Dock:
- Turn the controller power switch to ON.
- Plug the USB cable of the controller into the Switch dock connector.
- Connection is successful when controller vibrate, and the indicator light is always on.
Wireless Receiver
Connect to the Switch
- Turn the controller power switch to ON.
- Take out the OTG cable and connect one end to the Sw itch and the other end to t he controller.
- Connect ion is successful when controller vibrate, and t he indi cator light is always on.
Connect To The Switch Dock
- Turn the controller power switch to ON.
- Plug the receiver of the controller into the Switch dock connector.
- Connection is successful when controller vibrate, and t he red indicator light is always on.
Unable to Reconnect After Switch’s System Updated Connection
- Turn on the Switch, open up the[System Settings-Cont roller and Sensors-Disconnect Controllers] clear the connection information for the controller follow the prompts.
- Then turn on the Swi tch, open up t he [Controller and Sensors – Change Grip / Order] and reconnecting with Bluetooth.
Connect To PC
Bluetooth Connection (PC with Bluetooth reception is required)
- Make sure the control ler power switch is OFF, press and hold the FN + RB and tur n the power switch to ON until the indicator light flashes in blue and then release.
- Open the “Bluetooth and ot her devices” interface of PC, click “Xbox wireless controller” to connect.
- Connect ion is successful when controller vibrate, and t he yellow indi cator light is always on.
Wired Connection
- Turn the controller power switch to ON.
- Plug the USB cable of the controller into the PC USB port.
- Connection is successful when controller vibrate, and the indicator light is always on.
Wireless Receiver Connection
- Turn the controller power switch to OFF, press and hol d FN and turn the power switch to ON until the indicator light flashes in red and then release. (This step can be ignored for non-first-time pa iring.)
- Make sure the control ler power switch is ON, plug the receiver into the PC, then press the key of receiver, it will be automatically connected.
- Connect ion is successful when controller vibrate, and t he red indicator light is always on.
Note : When both the receiver and USB cable are connected, the controller switches to wired mode.
Connect To Mobile
Connect to Android Mobile Connection
- Open the Bluetooth of device.
- Make sure the controller power switch is OFF, press and hold the FN + B and turn the power switch to ON until t he indi cator light flashes in green and then release.
- Open the BEITONG Gaming Hall, then open Bluetooth settings interface of the device, and click “BTP-T6P2A BFM” to connect.
- Connection is successful when controller vibrate, and the green indicator light is always on.
NOTE : Support nat ive games, and play game by key mapping through BEITONG Gaming Hall App.
Connect to iPhone
- Open the Bluetooth of device.
- Make sure the controller power switch is OFF, press and hold the FN + B and turn the power switch to ON until t he indi cator light flashes in green and then release.
- Open the BEITONG Gaming Hall, then open Bluetooth settings interface of the device, click “BTP-T6P2A BFM” to connect.
- Connection is successful when controller vibrate, and the green indicator light is always on.
Native Game Mode
- Open the Bluetooth of device.
- Make sure the controller power switch is OFF, press and hold the FN + RB and turn the power switch to ON until t he indicator light flashes in yellow and t hen release.
- Open Bluetooth settings interface of the devi ce, click “Xbox wireless controller” to connect.
- Connection is successful when controller vibrate, and the indicator light is always on.
Wireless/Bluetooth Mode Switching
BEITONG ZEUS Pro has 4 wireless modes can be switched: 2.4G Wireless Receiver,
Xinput Bluetooth, Sw itch Bluetooth and BFM Bl uetoot h. Press and hold the FN
for 2s to switch modes or press key combination to enter the corresponding
mode. Enter a mode by pressing key combination is the forced connection state
for that mode.
Replaceable Parts
Replaceable Joysticks
( Note : Joysticks of diferent hei ghts need to be purchased additi
onally.)
Replaceable Face Shell
Breaking face shell firmly from the center of the top seam of the shell, and
the shell can be removed by slightly bulging and deforming the shell.
Breaking grip shell firmly from the the inside seam of the grip, and the shell can be removed by slightly bulging and deforming the shell.
Adjustable A B X Y Key Cap
After removing the face shell, take out the A B X Y key caps for position
adjustment.
Other Function
Light Adjustment
17 kinds of lights effect, can be switched freely.
Vibration Adjustment
Dual Rumble Motors, 5-Stage Intensity adjustable.
Joystick Sensitivity
Can be switched freely depending on game type.
Trigger Setting
Trigger stroke and vibration mode adjustable.
Specific PROFLE Key
4 Sets of PC/NS configuration can be saved, switch freely.
Switch’s Key Indicator Diagram
FAQ
Q: Why the controller can not be connected to the receiver, Bluetooth devices?
A. Generally, the receiver signal interference, or the controller is out of power.
- Make sure the controller has enough power, or charge it for 1 hour and try ag ain to connect.
- Try to insert the receiver into another USB port to test again, USB port to 3.0 is better.
- If the above methods are not effective, please contact official customer service.
Q: What charger should be used to charge the controller?
A : Use the standard 5V vol t 1~2A charger.
Q: How do I upgrade the firmware of the controller?
A : Install BEITONG Gaming Hall on your phone / Gamepad A ssistant on
your computer and follow the in-software instruct ions to upgrade the
firmware.
Product Specification
- Product Name BEITONG ZEUS Pro Elite Gamepad
- Product Model BTP-T6P2A
- Package Size 20020086mm
- Product Size 155.866105.6mm
- Product Weight 257g
- Adaptation Platform PC and Laptop(Windows 7 and above), Nintendo S witch, Android Phone(Android 9.0 and above), iOS Device(iOS 13.4 and above support Native Game), Android TV/Projector.
Customer Service
Dear customer,
Thanks for using BEITONG gaming peripheral products. We focus on providing
gamer with a better gaming experience, please provide the information through
your email for customer service:
- Purchasing Channel b.Buyer ID c.O rder Number d.Product Model. Please provide the below information for us according to the product situation
- Please provide service reason
- The function is not good b.Bad appearance c.Can not use in my device d.Can not play the game i want to play e.Other reason
- Please provide the service you need
- Replacement b.Repa iring c .Return d.Other
Customer service contact: beitong-oversea@betop-cn.com
We also welcome our customer to provide suggestion so that to improve and upgrade our product. Any go od idea for our products, please feel free to contact us. It’s very grateful. Meanwhile we’ll select the customer who in hig h-quality advice to experience our new products for free opportunity.
Sincerely
BEITONG Customer Service Team
For all Class B Digital Devices, a statement like the following is
needed:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limi ts are
designed to provide reasonable protection against harmful interference in a
resident ial installation. This e quipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause har mful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the follow ing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit di?erent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement.
More products and game information, Please follow BEITONG official
social media accounts.
WWW.BETOP-CN.COM/EN
Documents / Resources
|
BEITONG BTP-T6P2A ZEUS Pro Elite
Gamepad
[pdf] User Manual
BTP-T6P2A, 2AWMK-BTP-T6P2A, 2AWMKBTPT6P2A, BTP-T6P2A ZEUS Pro Elite Gamepad,
ZEUS Pro Elite Gamepad, Elite Gamepad, Gamepad
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>