BEITONG Zeus 2 Analog Optical Elite Game Pad User Manual
- June 12, 2024
- BEITONG
Table of Contents
USER MANUAL
- Indicator Light
- RT
- RB
- Start
- ABXY Key Modular
- Right Stick | RS
- Somatosensory Switch
- Audio Jack
- Profile Key
- FN Key
- D-Pad
- AI Key
- Left Stick | LS
- Back
- LB
- LT
- Type-C Port
- Power Switch
- M6
- Trigger Lock
- M3
- M4
- M2
- M1
- Trigger Lock
- M5
[I] Connect to Switch
1. Bluetooth Connection
(1) Turn on the Switch, open up the Controller and Sensors – Change Grip /
Order Make sure the controller power switch is OFF, press and hold the FN
+LB and turn the power switch to ON until the indicator light flashes in the
cycle of red/yellow/ purple/blue and then release.
(3) Connection is successful when controller vibrate, and the indicator light
is normal on.
- Light flashes quickly
2. Wired Connection
Connect to the Switch
(1) Turn the controller power switch to ON.
(2) Take out the OTG adapter and connect one end to the Switch and the other
end to the controller.
(3) Connection is successful when controller vibrate, and the indicator light
is normal on.
Connect To The Switch Dock
(1) Turn the controller power switch to ON.
(2) Plug the USB cable of the controller into the Switch dock connector.
(3) Connection is successful when controller vibrate, and the indicator light
is normal on.
3. Wireless Receiver Connection
Connect to the Switch
(1) Turn the controller power switch to ON.
(2) Take out the OTG adapter and connect one end to the Switch and the other
end to the Receiver.
(3) Connection is successful when controller vibrate, and the indicator light
is normal on.
Connect To The Switch Dock
(1) Turn the controller power switch to ON.
(2) Plug the receiver of the controller into the Switch dock connector.
(3) Connection is successful when controller vibrate, and the indicator light
is normal on.
- *Extra OTG adapter is needed, not included.
4. Unable to Reconnect After Switch’s System Updated
(1) Turn on the Switch, open up the [System Settings-Controller and Sensors
-Disconnect Controllers], clear the connection information for the controller
follow the prompts.
(2) Then turn on the Switch, open up the [Controller and Sensors – Change Grip
/ Order] and reconnecting with Bluetooth.
[II] Connect To PC
1. Bluetooth Connection (PC with Bluetooth reception is required)
(1) Make sure the controller power switch is OFF, press and hold the FN +RB
and turn the power switch to ON until the indicator light flashes in the cycle
of red/yellow/purple/blue and then release.
(2) Open the “Bluetooth and other devices” interface of PC, click “Xbox
wireless controller” to connect.
(3) Connection is successful when controller vibrate, and the indicator light
is normal on.
- Light flashes quickly
2. Wired Connection
(1) Turn the controller power switch to ON.
(2) Plug the USB cable of the controller into the PC USB port.
(3) Connection is successful when controller vibrate, and the indicator light
is normal on.
Note: When switch to the wired connection, make sure that the controller is
not in the connector connection mode.
3. Wireless Receiver Connection
(1) Turn the controller power switch to OFF, press and hold the FN key and
turn the power switch to ON until the indicator light flashes in the cycle of
red/yellow/purple/blue and then release.
(2) Make sure the controller power switch is ON, plug the receiver into the
PC, then press the key of receiver, it will be automatically connected.
(3) Connection is successful when controller vibrate, and the indicator light
is normal on.
- Light flashes quickly
Note: When connected via the receiver, the USB cable connected to the controller is still in the wireless connection state, at the same time the controller is in charging and the indicator light flashes slowly (when the receiver is unplugged, it automatically switches to wired connection).
[III] Connect To Mobile Device
Connect to Play Game
(1) Open the Bluetooth of device.
(2) Make sure the controller power switch is OFF, press and hold the FN key +
RB key and turn the power switch to ON until the indicator light flashes in
the cycle of red/yellow/purple/blue and then release.
(3) Open Bluetooth settings interface of the device, click “Xbox wireless
controller” to connect.
(4) Connection is successful when controller vibrate, and the indicator light
is normal on.
Note: This controller mode is an i0S-supported Xbox controller mode, allowing
you to play native iOS games that support the series of the Xbox controller.
Do not support MAC.
Connect to Set Mobile Software Configuration
(1) Open the Bluetooth of device.
(2) Make sure the controller power switch is OFF, press and hold the FN key +
AI key and turn the power switch to ON until the indicator light flashes in
the cycle of red/yellow/purple/blue and then release.
(3) Open Bluetooth settings interface of the device, click “BEITONG T9 BFM” to
connect.
(4) Connection is successful when the indicator light is normal on.
Device| Bluetooth Name| Support
---|---|---
iOS Device| Xbox wireless controller| Support native game
BEITONG T9 BFM| Only support software configuration
Android Device| Xbox wireless controller| Support native game and key mapping
BEITONG T9 BFM| Only support software configuration
[IV] Modular Function
BEITONG Zeus 2 Analog Optical Switches Elite Gamepad preset with 3 kinds of interchangeable key modules to meet the needs of various handfeel.
Types
| Stroke| Applicable scenarios| Life
---|---|---|---
Classic conductive| 1.1-1.2mm| Silent at night|
50~100W times
Crisp mechanical micro-action keys
| 0.7mm| Action Versus| 500W times
Instant analog optical switches micro keys| 0.25mm| Extreme Speed-pass|
8000W times
Transformation Guide
(1) Open the shell along the bottom seam position.
(2) Press down the key module clip at the same time, the key module pops out.
(3) Remove the key module and replace it.
[V] Trigger Vibration Function
Garners can customize the mode and intensity of trigger vibration through the ‘BEITONG Gamepad Assistant’.
BEITONG Zeus 2 Analog Optical Switches Elite Gamepad equipped with trigger
vibration function to experience immersive game exploration.
Note: In X input mode, the PC Bluetooth connection to the controller is
available to the trigger vibration function.
Trigger Vibration Effect: Can be linked with the vibration of controller
to achieve left and right tandem.
Intensity of Trigger Vibration: Five gears of strength, the left and right can be adjusted individually.
[VI] Replaceable Parts
Replaceable Joysticks
Vertical upward pull out to remove the replacement joystick, 3 height joystick personalized with car / gun / ball games.
Replaceable D-pad
Flip the D-pad up along the edge to replace, 2 types of D-pad match
freely.
Replaceable Magnetic Face Shell
The magnetic shell can be easily replaced by flipping the case along the bottom seam position, and the appearance is renewed every day.
[VII] Other Function
Light Adjustment
17 kinds of lights effect, can be switched freely.
Vibration Adjustment
Dual Rumble Motors, 5-Stage Intensity adjustable.
Joystick Sensitivity
Can be switched freely depending on game type.
Trigger Setting
Trigger stroke and vibration mode adjustable.
Specific PROFLE Key
4 Sets of PC/NS configuration can be saved, switch freely.
[VIII] Software Support
*About the assistant software, it supports personalized function setting/key test/firmware upgrade. It’s recommended to download according to gamer’s needs, but do not affect basic use of the controller without downloading.
BEITONG Gamepad Assistant For PC
(1) Download the software “BEITONG Gamepad Assistant” from BEITONG official
website: https://www.betop-cn.com/en/#/down
(Note: If you enter the Chinese Official Website, please set the language in
the upper right corner to English, and then click the DOWNLOAD enter into the
download page.)
(2) Use USB cable to connect the Gamepad and computer together
a. Turn the power switch to ON in the power-off state;
b. The connection is completed when the Gamepad vibrates and the indicator
light is on.
(3) Run the software “BEITONG Gamepad Assistant” to set up the Gamepad function.
NOTE:
- It’s recommended to confirm upgrade if prompted for a firmware upgrade, to experience any updated features.
- In order to use the BEITONG Gamepad Assistant normally, the Gamepad must be connected to the computer with USB cable.
- Please feel free to run our secure program, if it can’t be downloaded and run normally, try again after closing the antivirus software.
- If the firmware upgrade fails due to factors such as signal disconnection, disconnection or poor contact, please unplug the USB cable and then re-plug again to resume the firmware upgrade.
BEITONG Gaming Hall For Mobile
(1) Download the App from BEITONG official website on PC: https://www.betop-
cn.com/en/#/down
(2) Select the corresponding version of App to download and install it on your
mobile device.
(3) Connect the controller to the device via Bluetooth to set up the
Controller function or update the firmware.
*This Bluetooth connection method supports software configuration only, press and hold the FN + AI and turn the power switch to ON to turn on the controller, search for the named [ BEITONG T9 BFM ] to connect.
[IX] FAQ
Why the controller can not be connected to the receiver, Bluetooth devices?
Generally, the receiver signal interference, or the controller is out of
power.
Solutions:
1. Make sure the controller has enough power, or charge it for 1 hour and try
again to connect.
2. Try to insert the receiver into another USB port to test again, USB port
to 3.0 is better.
3. If the above methods are not effective, please contact the official
customer service.
What charger should be used to charge the controller?
Use the standard 5V volt 1~2A charger, or use the BEITONG Zeus 2 wireless charging dock.
How do I upgrade the firmware of the controller?
Install BEITONG Gaming Hall on your phone / Gamepad Assistant on your computer and follow the in-software instructions to upgrade the firmware.
[X] Customer Service
Dear customer,
Thanks for using BEITONG gaming peripheral products.
We focus on providing gamer with a better gaming experience, please provide
the information through your email for customer service:
a. Purchasing Channel b. Buyer ID c. Order Number d. Product Model
Please provide the below information for us according to the product
situation:
-
Please provide service reason
a. Function is not good b. Bad appearance c. Can not use in my device
d. Can not play the game i want to play e. Other reason -
Please provide the service you need
a. Replacement b. Repairing c. Return d. Other
Customer service contact:beitong-oversea@betop-cn.com
We also welcome our customer to provide suggestion so that to improve and
upgrade our product. Any good idea for our products, please feel free to
contact us. It’s very grateful Meanwhile we’ll select the customer who in
high-quality advice to experience our new products for free opportunity.
Sincerely
BEITONG Customer Service Team
Customer Service
Dear customer,
Thanks for using BEITONG gaming peripheral products.
We focus on providing gamer with a better gaming experience, please provide
the information through your email for customer service:
a. Purchasing Channel b. Buyer ID c. Order Number d. Product Model
Please provide the below information for us according to the product situation:
-
Please provide service reason
a. Function is not good b. Bad appearance c. Can not use in my device d. Can not play the game i want to play e. Other reason -
Please provide the service you need
a. Replacement b. Repairing c. Return d. Other
Customer service contact:beitong-oversea@betop-cn.com
We also welcome our customer to provide suggestion so that to improve and upgrade our product. Any good idea for our products, please feel free to contact us. It’s very grateful. Meanwhile we’ll select the customer who in high-quality advice to experience our new products for free opportunity.
Sincerely
BEITONG Customer Service Team
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
ABOUT BEITONG
Leading brand of smart gaming peripherals in China
Been focusing on game controller and software development more than 26 years
Sticking on quality, function and innovation
Customizing professional control solutions for different types of games
Creating the stronger experience of game control for gamers
CUSTOMER SERVICE
Official website: www.betop-cn.com/en/
Service Email: beitong-oversea@betop-cn.com
More products and game information, please follow BEITONG official social
media accounts.
Official YouTube Official Amazon Official Website
ZEUS 2 ANALOG OPTICAL ELITE GAMEPAD
Documents / Resources
|
BEITONG Zeus 2 Analog Optical Elite Game
Pad
[pdf] User Manual
2AWMK-BTP-T9, 2AWMKBTPT9, btp t9, Zeus 2, Analog Optical Elite Game Pad, Zeus
2 Analog Optical Elite Game Pad, Optical Elite Game Pad, Elite Game Pad, Game
Pad, Pad
---|---
References
- cn.com
- [Beitong official website] 20 years leading brand of intelligent game controller
- [Beitong official website] 20 years leading brand of intelligent game controller
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>