BEITONG ASURA 2PRO Wireless Game Controller User Manual

BEITONG ASURA 2PRO Wireless Game Controller

Button Introduction

Front View

Vertical View

Back View

Bottom View

Power ON/OFF Procedure

Power ON
Using the receiver to connect the device, short press the BEITONG LOGO(HOME Button) to turn the Controller on.

Power OFF

1. Press and hold the BACK button + B button for about 3 seconds, the Controller will be turned off.
   

2. When the Controller is connected, without any operation for 10 minutes, the Controller will automatically shut down.

3. When the Controller is not connected, without any operation for 120 seconds, the Controller will automatically shut down.

4. When the power cannot support the normal use of the Controller, it will be powered off if the power is low.

Light Introduction

*The Breathing Light refers to the RGB aperture on the outer edge of the HOME Button(BEITONG).
Under normal connection, the Breathing Light shows white. The state of Breathing Light can be customized through the BEITONG ASURA 2 Pro Assistant (BEITONG Game Hall).

the customize light state or light off.

Connection Tutorial

Connect to Computer

Wireless Connection
Insert the wireless receiver into the USB interface of the computer, and press the BEITONG Logo (HOME Button) to turn Controller on. The connection is completed when the Controller vibrates and the breathing light is on.

Wired Connection
Use USB cable to connect the Controller and computer together, and then press the BEITONG Logo (HOME Button) to turn Controller on. The connection is completed when the Controller vibrates and the breathing light is on.

Connect to TV

Wireless Connection
Insert the wireless receiver into the USB interface of the TV, and press the BEITONG Logo (HOME Button) to turn Controller on. The connection is completed when the Controller vibrates and the breathing light is on.

• For a more stable connection during gaming, it is recommended to use an extension cable to connect the TV and wireless receiver.

Wired Connection
Use USB cable to connect the Controller and TV together, and then press the BEITONG Logo (HOME Button) to turn Controller on. The connection is completed when the Controller vibrates and the breathing light is on.

Software Configuration Introduction

“BEITONG Gamepad Assistant” Software Configuration

Download and install the software “BEITONG Gamepad Assistant”

1. Download the software “BEITONG Gamepad Assistant” from BEITONG official website: https://www.betop-cn.com/en/#/down
   ( Note: If you enter the Chinese Official Website, please set the language in the upper right corner to English, and then click the DOWNLOAD enter into the download page.)

2. Use USB cable to connect the Controller and computer together
   *In order to use the BEITONG Gamepad Assistant normally, the Controller must be connected to the computer with USB cable.
   

3. Run the software “BEITONG Gamepad Assistant” to set up the Controller function.
   If reminded to update the firmware, be sure to click “Confirm”.
   
   If the firmware upgrade fails due to factors such as signal disconnection, disconnection or poor contact, please unplug the USB cable and then re-plug again to resume the firmware upgrade.

Customizable Buttons

1. After entering the “BEITONG Gamepad Assistant”, click any button value to enter the button value modification interface.
   

2. In this interface, you can modify the button value according to your needs, click the “Restore Default” button, you can cancel all button modification operations and return to the default state.
   

Vibration Customization

1. Click the “Settings” button in the main interface to enter the advanced settings interface.
   

2. Drag the “Vibration” slider in the “Basic” tab interface to adjust the vibration intensity. The vibration motors on the left and right sides each have five gears that can be adjusted.
   

TURBO Button Frequency Adjustment

1. Click the “Settings” button in the main interface to enter the advanced settings interface.
   

2. Manually adjust the number in the “Turbo” Button function in the “Button” tab to change the Turbo frequency. The default frequency of the Turbo button is 10 times/second, and the maximum frequency is 30 times/second.
   

Adjust the Sensitivity of the Joystick

1. Click the “Settings” button in the main interface to enter the advanced settings interface.
   

2. In the “Joystick” tab, the sensitivity of the left and right joysticks of the Controller can be individually set.
   

Breathing Light Adjustment

1. Click the “Settings” button in the main interface to enter the advanced settings interface.
   

2. The “Light” adjustment settings of the “Basic” tab can modify the color, brightness, frequency and work type of the Controller’s Breathing Light as needed.
   

Button Macro Function

*BEITONG ASURA 2PRO Series supports custom macro settings for LB/RB, M1/M2 back buttons.

1. Click the “Settings” button in the main interface to enter the advanced settings interface.
   

2. Click the “Default” button of any button of LB/RB, M1/M2 in the “Button” tab enter into the next interface.
   

3. On the next interface, click the “Default” button in the upper right corner, then click to select “Set Macro” in the drop-down menu.
   

4. Press the desired button combination in the Controller to form a macro command, and then click “Save” to complete the button macro setting.
   

Custom Sleep Time of the Controller and Calibration Function %

1. Click the “Settings” button in the main interface to enter the advanced settings interface.2. In the “Function” tab, the sleep time can be adjusted, also can calibrate the joystick and trigger.
   

2. In the “Function” tab, the sleep time can be adjusted, also can calibrate the joystick and trigger.
   

TURBO Button Introduction

Press and hold the Turbo button in the power-on state, and then press any button to set the Turbo function, repeat this operation to cancel the Turbo function.

Joystick Calibration

*Controller Assistant also support joystick and trigger calibration
If you encounter problems of Joystick such as drift, not work, or inability to return to the middle, you can try to use the joystick calibration function to solve:

• Step 1: Press the START button + BACK button in the power-on state, and then press the Right Joystick(RS) to enter the calibration mode.
  *After entering the joystick calibration state successfully, the Breathing Light turns pink.

• Step 2: Turn the left and right Joystick clockwise 2-3 turns.
  

• Step 3: After completing the calibration operation, press the START Button + BACK Button at the same time, and then press the Right Joystick(RS) to exit the calibration.

• After exiting the calibration mode, the Breathing Light returns to the multi-color flashing state.
  

Clear pairing mode: Press RB Button + BACK Button + RS Button + HOME Button in the power off state, pairing information can be actively cleared.

Product Specification

Adaptation

platform

| PC Window 7 and later, Android TV
Package Include| BEITONG Asura2 Pro Wireless Controller x 1, Wireless Receiver x 1, USB Cable x 1, User Manual x 1

ABOUT BEITONG
Leading brand of smart gaming peripherals in China
Been focusing on game controller and software development more than 25 years
Sticking on quality, function and innovation
Customizing professional control solutions for different types of games
Creating the stronger experience of game control for gamers

CUSTOMER SERVICE
Official website: https://www.betop-cn.com/en
Service Email: [email protected]
More products and game information, please follow BEITONG official social media accounts.

References

• cn.com
• [Beitong official website] 20 years leading brand of intelligent game controller
• [Beitong official website] 20 years leading brand of intelligent game controller

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>