VIVO MOUNT-G200B Aluminum Wall Mount for 23” to 43” TVs Instruction Manual

June 13, 2024
Vivo

VIVO logo


Premium Aluminum TV Wall Mount

Instruction Manual
SKU: MOUNT-G200B

VIVO MOUNT-G200B - QR Code 1Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

https://vivo-us.com/products/mount-g200b


GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

   help@vivo-us.com

www.vivo-us.com Chat live with an agent!

Call 309-278-5303

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

PACKAGE CONTENTS

| | | |
---|---|---|---|---
A (x1)
Arm| B (x1)
VESA Plate| C (x1)
Oval Screw Cover| D (x1)
Circle Screw Cover| M-A (x4)
M4x14
| | | |
M-B (x4)
M5x14mm Screw| M-C (x4)
M6x14mm Screw | M-D (x4)
M8x20mm Screw| M-E (x4)
M5 Washer| M-F (x4)
M8 Washer
| | | |
M-G (x8)
Spacer| W-A (x3)
Wall Bolt| W-B (x3)
Anchor| W-C (x3)
Washer| T-A (x1)
4mm Allen Wrench
|
T-B (x1)
6mm Allen Wrench| T-C (x1)
Wrench

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

CAUTION!

DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us. com, email at help@vivo-us.com, or call us at 309-278-5303.

TOOLS NEEDED

Phillips Screwdriver

Drill

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS
STEP 1

OPTION A: Wood Wall
Using the wall plate on Arm (A) , mark drilling locations. Use of a stud finder is highly recommended. Drill 2.2″ (55mm) deep holes using a 3/16″ (4.5mm) drill bit, and mount Arm to the wall using Wall Screws (W-A) and Washers (W-C).

OPTION B: Concrete Wall
Using the wall plate on Arm (A) , mark drilling locations. Drill 2.4″ (60mm) deep holes using a 3/8″ (10mm) drill bit, press Anchors (W-B) into holes, and mount Arm to the wall using Wall Screws (W-A) and Washers (W-C). NOTE: Anchors are made for use with concrete or brick, and will not work with drywall.

VIVO MOUNT-G200B - ASSEMBLY 1e

STEP 2

Attach Screw Covers (C, D) to wall plate.

STEP 3

Remove lower nut from VESA Plate (B) using Wrench (T-C) , and loosen the upper two nuts until 3mm of screw thread is exposed for each one.

VIVO MOUNT-G200B - ASSEMBLY 3

STEP 4

OPTION A: Flat Back Monitor
Mount VESA Plate (B) to TV using appropriate Screws (M-A, M-B, M-C, or M-D) with Washers (M-E or M-F) , making sure the two nuts are facing towards the top of the TV.

VIVO MOUNT-G200B - ASSEMBLY 4a

OPTION B: Curved Back Screens
Mount VESA Plate (B) to TV using appropriate Screws (M-D) with Washers (M-F) and Spacers (M-G) , making sure the two nuts are facing towards the top of the TV.

VIVO MOUNT-G200B - ASSEMBLY 4b

STEP 5

Hang TV with VESA plate onto head of Arm (A). Reinstall lower nut to secure the plate, and tighten all nuts using the wrench.

STEP 6

Adjust gas spring tension using 6mm Allen Wrench (T-B). Turn counter- clockwise to increase lift, and clockwise to decrease. Adjust the tilt joint support using 4mm Allen Wrench (T-A). NOTE: use a large flat-blade screwdriver to tighten the socket set screw if the joint makes a popping noise.

WARNING:
TV must be installed on mount before making tension adjustments to the gas spring arm.
Keep monitor in a straight orientation when making adjustments.

STEP 7

Use built in cable clips to manage cables.

Adjust as Desired

VIVO MOUNT-G200B - Adjust as Desired

VIVO Camera

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us

LAST UPDATED: 12/12/2022
REV1

VIVO logo 2

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

Call 309-278-5303

AVG. RESOLUTION TIME (within office hrs): 5M 4S


www.vivo-us.com
Chat live with an agent!

AVG. RESOLUTION TIME (within office hrs): < 15 M


help@vivo-us.com

AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Vivo User Manuals

Related Manuals