GOLDEN LIGHTING 1648-M1L BLK-CLR 1-Light Matte Black Clear Glass Crystal Mini Pendant Light Instruction Manual
- October 26, 2023
- GOLDEN LIGHTING
Table of Contents
1648-M1L BLK-CLR 1-Light Matte Black
Clear Glass Crystal Mini Pendant Light
Instruction Manual
1648-M1L BLK-CLR 1-Light Matte Black Clear Glass Crystal Mini Pendant
Light
Next-Gen Audio Experience: Best Noi...
Next-Gen Audio Experience: Best Noise-Canceling Headphones of 2023
Thank You for Choosing Golden Lighting for Your Lighting Needs!
For Customer Service, contact the place of purchase to arrange for
replacement parts.
IMPORTANT:
- All installation work should be done by an accredited professional.
- Shut off the power supply at the fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions: 1648-M1L
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove the old fixtures from the wall, including the
old mounting strap. 1. Take the mounting strap assembly from the parts bag.
Mounting strap (B) contains several threaded holes. Two sets of mounting
screws (A & D) should be attached to the mounting strap (B). You may need to
tighten nuts (C) that hold mounting screws (D) in place. If the screws are not
attached, please hold canopy (G) up to mounting strap (B). Line up the holes
in the canopy (G) with the holes in the mounting strap (B) and insert mounting
screws (D) into the mounting strap (B) so that mounting screws (D) protrude
through the holes in the canopy (G). Mounting screws (D) are long, so please
test canopy (G) against the mounting strap and practice threading deco nuts
(F) onto mounting screws (D) to see how far you should insert mounting screws
(D). Remove the deco nuts (F) and canopy (G). Tighten nuts (C) onto mounting
screws (D) to hold the screws in place. 2. Pull the house wires through the
center of the mounting strap (B). 3. Secure the mounting strap (B) to the
junction box with mounting screws (A) and a screwdriver. Tighten the screws
securely.
ASSEMBLING THE FIXTURE
4. Measure to determine the correct number of rods needed for proper hanging
height. If necessary, slide off rods to shorten the fixture to the desired
height. If more rods are needed to lengthen the fixture, please contact the
place of purchase to order more. 5. Feed the fixture wires from column (L)
through the desired number of rods (I). Pull wires until taut. Thread
assembled rod (I) onto column (P). Thread the top of the assembled rods (I)
into swivel (H) and out canopy (G). Pull the wires until taut. Trim the
remaining fixture wires to the desired length plus 8 to 10 inches for
installation.
CONNECTING THE WIRES
6. Have an assistant support the fixture’s weight while completing the
wiring. Refer to the wiring diagram and attach the fixture’s wires to the
power supply wires from the junction box. Attach the fixture’s wires to the
power supply wires from the junction box. Connect Hot to Hot (transparent wire
with black inner thread, black, or smooth wire) Neutral to Neutral
(transparent wire with white inner thread, white, or ribbed wire), and Ground
to Ground (transparent wire with green inner thread, green wire, or copper).
Twist the ends of the wire pairs together, and then twist on a wire connector.
Make sure all twists are in the same direction. If there is no house ground
wire coming from the junction box, locate the ground screw (E) on the mounting
bracket/mounting strap and wrap the fixture’s ground wire around the ground
screw. Use a screwdriver to tighten the top of the ground screw (E) onto the
wires and into the mounting bracket/mounting strap. Tuck the wires into the
junction box.
FINISHING THE INSTALLATION
7. Push canopy (G) up to the ceiling over the mounting strap (B) until
mounting screws (D) protrude from the holes in the canopy. Thread deco nuts
(F) onto the exposed threads of mounting screws (D). Tighten deco nuts (F) so
that the nuts are securing the canopy (G) to the mounting strap (B) and that
the canopy is snug against the ceiling. 8. Hold shade (M) over socket threads
found at the bottom of column (L). Secure shade (M) to socket threads using
socket cover (N). Install a light bulb (not included) in accordance with the
fixture’s specifications. Do not exceed the maximum recommended wattage. Your
installation is now complete. Turn on the power and test the fixture.
How to Identify the Fixture’s Wires
Hot: Smooth, Black, or Transparent with Black Inner Thread
Neutral: Ribbed, White or Transparent with White Inner Thread
Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
| 
---|---
| 
|
---|---|---
Pendants & Linear Pendants Above a Kitchen Island Center a linear pendant over
the island. If hanging pendants, use one pendant for every 24″ of the island.
Fixtures should hang at least 30″ above the countertop.| Pendants &
Chandeliers Above a Dining Room Table Fixtures should stay at least 30″ above
the table. Use a fixture that is 12″ narrower than the width of the table.|
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for
any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social…
https://qrco.de/bbv8UC
@GoldenLighting
@GLFixtures
**@GoldenLighting1
@GoldenLighting
[ GoldenLighting.com**](http://GoldenLighting.com)
Documents / Resources
|
GOLDEN LIGHTING 1648-M1L BLK-CLR 1-Light Matte Black Clear Glass Crystal Mini
Pendant
Light
[pdf] Instruction Manual
1648-M1L BLK-CLR 1-Light Matte Black Clear Glass Crystal Mini Pendant Light,
1648-M1L BLK-CLR, 1-Light Matte Black Clear Glass Crystal Mini Pendant Light,
Mini Pendant Light, Pendant Light, Light
---|---