HYUNDAI LD-SFL-10W Solar Flood Light Instruction Manual
- June 13, 2024
- HYUNDAI
Table of Contents
HYUNDAI LD-SFL-10W Solar Flood Light
Product Information
- Product Model: LD-SFL-10W Twinspad-PIR
- Power: 10W
- Solar Panel: 6.5W+6.5W Mono-crystalline silicon (double sided charging)
- Beam Angle: Not specified
- Fixture Color: Black
- IP Class: IP65 (Waterproof)
- Solar Panel Size: 345mm x 236mm x 45mm
- Installation Height: Less than 5 meters
- Solar Panel Cable: 3 meters long
- Lumens: 1100Lm
- Battery: 7200mAH/3.7V 18650 Lithium battery replaceable
- PIR Sensor Range: Not specified
- Working Temperature: Not specified
- Material: ABS+PC housing, Aluminum bracket, Anti-UV
- LED Type: SMD2835/55pcs
- Color Temperature: 3000K/4000K/6000K
- Lamp Size: 232mm x 166mm x 34mm
- Warranty: 2 years (Battery – 1 year)
Product Usage Instructions
Installations:
- Wall Mounted:
- Drill 2 holes of 8mm in the wall with a spacing of 88.5mm.
- Fix the expansion plugs and screws into the holes with some space to spare. (Do not screw all the way to the bottom).
- Push aside the stand bracket, align the hanging holes on the bracket with the screws and hang the lamp on the wall. The recommended hanging height is less than 2m.
- Put on flat surface directly:
- Push aside the stand bracket and put it on a flat surface.
- Hang on the wall:
- Drill 2 holes of 8mm in the wall with a spacing of 88.5mm.
- Fix the expansion plugs and screws into the holes with some space to spare. (Do not screw all the way to the bottom).
- Push aside the stand bracket, align the hanging holes on the bracket with the screws and hang the lamp on the wall. The recommended hanging height is less than 2m.
Working Modes:
- Constant Lighting Mode (Lamp NOT connected with solar panel):
- Mode A1: Press * 1st time, the light will turn on to 30% constant brightness.
- Mode A2: Press * a 2nd time, the light turns on to 100% constant brightness.
- Mode A3: Press * a 3rd time to turn off the light.
- Sensor Mode (Lamp connected with solar panel):
- Mode B1: Press 1st time, automatically turns on to 100% brightness (1100lm) when motion is detected in range 6m and then turns to 5% brightness in 20 seconds of no motion.
- Mode B2: Press 2nd time, automatically turns on & remain 100% brightness (1100lm) for 5hrs. After 5hrs or when battery capacity is less than 30%, it turns to Mode B1.
- Mode B3: Press 3rd time, it turns off.
Additional Power Bank Function:
- USB Output: 5.0V/1.0A
- DC-Micro Input: 5.0V/1.0A
- Indicator of Battery Capacity: 25%, 50%, 75%, 100%
Contact Information:
Website: hyundailighting-rsa.co.za
Email: info@hyundailighting-rsa.co.za
INSTRUCTION
- new flexible designed lamp that can be used seperately or be connectd to a solar panel.
- Comes with different working modes and options for outdoor and indoor applications. Can be charged by solar or USB.
- It is simple and convenient to adjust without any tools required.
- Multifunctional with Four-In-One design.
- Double-sided solar panel for efficient and reliable charging in any weather.
- USB interface design can be charged and discharged via USB, can be used as a power bank.
- PIR sensor with different working modes.
Specifications
-
Product Model
LD-SFL-10W Twinspad-PIR -
Power
10W -
Solar Panel
6.5W+6.5W Mono-crystalline silicon (double sided charging) -
Beam Angle
90° -
Fixture Color
Black -
IP Class
Ip65 -
Solar P a nel Size
345mm x 236mm x 45mm -
Installation Height
Less than 5 meters -
Solar Panel Cable
3 meters long -
Lumens
1100Lm -
Battery
7200mAH/3.7V 18650 Lithium battery replaceable -
PI R Sensor Range
Detection angle: 120° Detection area: ≤6 Meters -
Wor k ing Temprature
-20°C – 50°C -
Material
ABS+PC housing, Aluminum bracket, Anti-UV -
LED Type
SMD2835/55pcs -
Colour Temprature
3000K/4000K/6000K -
Lamp Size
232mm x 166mm x 34mm -
Warranty
2 years (Battery – 1 year
Installations
A: Wall Mounted
- Check and prepare the lamp, accessories and tools
- Drill 2 holes of 8mm with a depth of 60mm and a spacing in between of 167mm. Fix the solar panel onto the wall.
- Drill 2 holes of 8mm with a depth of 60mm and a spacing in between of 132.5 mm. Fix the lamp onto the wall.
- Open the silicone at the bottom of the lamp. Connect the wire of the solar panel to the lamp and fasten it tightly.
- Adjust the solar panel and lamp to the correct position according to the local latitude and lighting direction. Turn on the lamp.
B: Put on flat surface directly
Push aside the stand bracket and put it on a flat surface.
C: Hang on the wall
- Drill 2 holes of 8mm in the wall with a spacing of 88.5mm.
- Fix the expansion plugs and screws into the holes with some space to spare. (Do not screw all the way to the bottom).
- Push aside the stand bracket, align the hanging holes on the bracket with the screws and hang the lamp on the wall.
The recommended hanging height is less than 2m
Working Modes
Mode A: Constant Lighting Mode (Lamp NOT connected with solar panel)
In this working mode, the PIR sensor & Photocell control will not work.
- Mode A1: Press * 1st time, the light will turn on to 30% constant brightness
- Mode A2: Press * a 2nd time, the light turns on to 100% constant brightness.
- Mode A3: Press * a 3rd time to turn off the light
Mode B: Sensor Mode (Lamp connected with solar panel)
In this working mode, the lamp will automatically turn on at night and turn
off again in day time.
- Mode B1: Press 1st time, automatically turns on to 100% brightness (1100lm) when motion is detected in range ≦6m and then turns to 5% brightness in 20 seconds of no motion.
- Mode B2: Press 2nd time, automatically turns on & remain 100% brightness (1100lm) for 5hrs. After 5hrs or when battery capacity is less than 30%, it turns to Mode B1.
- Mode B3: Press 3rd time, it turns off.
Additional Power Bank Function
USB Output: 5.0V/1.0A DC-Micro Input: 5.0V/1.0A Indicator of Battery Capacity: 25%, 50%, 75%, 100%.
hyundailighting-rsa.co.za | info @hyundailighting-rsa.co.za |