QUOIZEL WVR8209EK Westover 4 Light Instruction Manual
- June 13, 2024
- QUOIZEL
Table of Contents
QUOIZEL WVR8209EK Westover 4 Light
Product Information
The WVR8209EK is a lighting fixture manufactured by Quoizel. It is designed to provide illumination and enhance the aesthetic appeal of your space. The fixture comes with a variety of components, including an inner backplate, mounting hardware, glass panels, wire connectors, outlet box screws, lock screws, candlecovers, curved plates, wall anchors, and screws. The fixture requires four bulbs with a candelabra (E12) bulb base type and abulb shape type B. The maximum recommended wattage for each bulb is60W.
Product Usage Instructions
- Install Candle Cover and Bulbs: Begin by installing the candle covers and bulbs onto the fixture. Refer to the fixture markings and/or labels to ensure you install the correct bulbs. The beveled side of the candle cover should be facing outside.
- Install Glass Panels: Next, install the four glass panels onto the fixture. Follow the reverse steps to removethe curved plate and glass panel if you need to replace them.
- Install Inner Backplate: Attach the inner backplate to the outlet box.
- Wiring: Connect the wires as follows:
- White wire from the supply to white wire from the fixture.
- Black (or red) wire from the supply to black wire from thefixture.
- Ground wire from the supply to ground wire from the fixture using the green ground screw.
- Install Lanyard and Fixture Body: Install the lanyard and fixture body onto the backplate.
- Apply Caulking: Apply exterior caulk around the fixture, except for the bottom of the backplate to allow moisture to escape.
HOW TO REPLACE GLASS Panel and Bulb
To replace a glass panel and bulb, follow these steps:
- Remove the curved plate.
- Remove the glass panel and bulb.
Reverse the above steps to reinstall the replacement glass panels onto the
fixture.
Your installation is now complete! Remember to restore electricity and keep
this sheet for future reference.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
install or operate the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
CARE AND MAINTENANCE
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh
chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at
1-800-645-3184 (9:00am – 5:00pm EST),
or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS
MOUNTING HARDWARE
