JBC BI210UA B IRON 210 Precision Battery System Soldering Station Instruction Manual

JBC BI210UA B IRON 210 Precision Battery System Soldering Station

Product Information

The Precision Battery Soldering Station is a high-quality soldering tool that is designed for precision soldering tasks. It features advanced technology that allows for quick tip temperature recovery, enabling users to work at lower temperatures. The station comes with various voltage options to suit different regions, including North America, India, Europe, the United Kingdom, China, and Japan. The package includes a USB cable for charging, brass wool for cleaning the tip, a power cord, and an instruction manual. The cartridge storage and cartridge exchanger provide convenient access to different soldering tips, while the console support and tool holder ensure stability during use. The station also comes with a status indicator light to provide real-time information about the tool’s status.

Product Usage Instructions

1. Connection:
   • Connect the stand to a power outlet with a voltage range of 100-240V.
2. Cartridge Insertion and Charging:
   • Insert a cartridge into the tool and place it into the charger on the stand.
   • Note: Charge the tool completely for 30 minutes before using it for the first time.
3. Switching on Console/Device:
   • Select the desired tool from the detection list on the console work screen.
4. JBC Temperature Selection:
   • Adjust the temperature using the temperature selection slider on the console work screen.
5. Operation:
   • The soldering system is designed to recover tip temperature quickly, allowing for efficient soldering at lower temperatures.
6. Charging and Hibernation:
   • When the tool is lifted from the stand, the tip will heat up to the selected temperature.
   • When the tool is placed back in the stand, it enters Hibernation Mode and cools down to room temperature while charging.
   • Note: If the tool remains inactive outside of the stand, it will enter Hibernation mode and cool down to room temperature.

For more information and additional features, you can download the JBC App for Android devices from https://www.jbctools.com/jbcsoftware.html or from the Apple Store for Apple devices.

This manual corresponds to the following references:
*Console included:**

• BI210UA 120 V – N. America, Taiwan
• BI210IA 230 V – India
• BI210A 230 V – Europe
• BI210KA 230 V – United Kingdom
• BI210HA 230 V – China
• BI210JA 100 V – Japan

*Console not included:**

• BI210UQA 120 V – N. America, Taiwan
• BI210IQA 230 V – India
• BI210QA 230 V – Europe
• BI210KQA 230 V – United Kingdom
• BI210HQA 230 V – China
• BI210JQA 100 V – Japan

Packing List

The following items are included:

Features and Connections

Quick Start

1. Connection
   Connect the stand to the mains (100 – 240 V).

2. Cartridge Insertion  and  charging
   Insert a cartridge into the tool (1) and place it into the charger on the stand (2).
   Note: Charge the tool completely (30 min) before using it for the first time.
   The status indicator light indicates as follows the tool status:

   • green working/soldering

   • green blinking charging

   • alternating red/green blinking
     low battery,
     less than 20%

   • red blinking no cartridge

   • no color power OFF

3. Switching on Console/Device
   Turn on the console/device and open the  application
   

4. Selecting Tool
   Select the tool from the detection list.

Note: Furthermore, the App can be downloaded for Android devices from https://www.jbctools.com/jbcsoftware.html and for Apple devices from Apple Store:

Console Work Screen
The work screen shows the graph of the current tip temperature and the power supplied to the tip by moving the graph permantely to the left.

Operation

The JBC Most Efficient Soldering System
This revolutionary technology is able to recover tip temperature extremely quickly. This allows the user to work at a lower temperature

• Work
  When the tool is lifted from the stand the tip will heat up to the selected temperature.

• Charging and Hibernation
  When the tool is in the stand enters into Hibernation Mode and cools down to room temperature. While the tool remains in the stand, it charges.

Note: When the tool is lifted from stand the Soldering System acts as follows:

• Hibernation
  When the tool is outside of the stand and remains inactive (no movement), the tool enters into Hibernation mode and cools down to room temperature.

• Turn off
  If the tool has been inactive for a longer period of time, it is turned off.

• Turned On
  To turn the tool on, put it back into the stand.

Note: If desired, the tool can be switched off/on. Tab the Tool Power Switch on the tablet screen (bottom right) to switch it off/on.

Graphics

The work screen shows the automatic recording of the temperature and power graphics. The automatic recording can be paused by tapping the screen in the graphic area. The automatic recording stops also when the tool stops working. While the automatic recording is stopped, you can get the temperature/power value on a certain point by tapping the graph on the tablet screen.

The graphic can be moved to the left and right by swiping the touch screen sideways with one finger. The recording starts automatically as soon as the tool is removed from the stand and the graphic automatically jumps to the end of the last recording and continues with the recording.

Note: When the tool is placed in the stand and is not in use, the temperature/power recording stops. A gap can then be seen in the curve graphics

Tip Cleaner

Select the option to suit your needs and improve the  tip thermal transfer.

Antisplash Membrane with Wiper
Ref. CL0301
The antisplash membrane prevents splashing and keeps the work area clean.
Includes a temperature-resistant wiper for removing excess solder by gently tapping or wiping the cartridge tip.
If the tip is very dirty, JBC recommends first cleaning it with the wiper to remove excess solder and then with the brass wool.

Wiper

• Tapping
  Tap gently to remove excess solder.

• Wiping
  Use the slots to remove the remaining particles.

Replacing Brass Wool

1. Lifting
   Lift and remove the anti splash membrane.

2. Replacing
   Replace the brass wool with a new one. Make sure that the brass wool is on the far left and that there is space for the wiper on the right.

3. Assembling
   Assemble the antisplash membrane in a vertical direction onto the stand.

4. Pressing on
   Press the antisplash membrane down. Make sure that the membrane is correctly inserted all around

Note: The brass wool and the wiper position can be reversed by rotating the antisplash membrane 180 degrees.

Cartridge Exchanger

Save time and change cartridges safely without switching the station off.

1. Removing
   Place the handpiece in the extractor and pull to remove the cartridge.

2. Inserting
   Place the handpiece on top of the new cartridge and press down slightly.

3. Fixing
   Use the holes for fixing the cartridge.

*Important: Insert the cartridge up to the stop. The charging indicator light changes from red to green when the cartridge is properly inserted.

Compatible Cartridges
B 210 Precision Tool works with C210 Cartridges. Find the model that best suits your soldering needs at www.jbctools.com

Changing the Grips
Foam grips for B115 and B210 tools can be exchanged. Remove the worn grip and replace it easily with a new one by using slip-on tabs. To change the grips do as follows:

1. Inserting Tabs
   Put the slide-on tabs into the new grip

2. Inserting Handle
   Push the grip with the tabs onto the handle.

3. Removing Tabs
   Hold the grip and pull the tab. Use pliers if necessary.

Menu Settings

The B•iRON Console offers an intuitive user interface, which provides quick access to station parameters

Parameters

B-iRON Update

• Download the BC update file from: https://www.jbctools.com/ibcsoftware.html 
• Connect the console/device via USB connection to the PC. -On the console/device notification bar at the top, open “USB Connection Settings and select “MTP”.
• On the PC copy the downloaded file to “IT706/internal share storage/JBC”.
• Once copying is finished, disconnect the console/device from the PC.
• On the console/device open the Application (1) and then select “update” (2) on the Application Menu.

Use the update button of the version to be downloaded.

Maintenance

Before carrying out maintenance, always extract the cartridge and disconnect it from the mains. Allow the equipment to cool down.

• Use a damp cloth to clean the casing and the tool. Alcohol can only be used to clean the metal parts.
• Periodically check that the metal parts of the tool and stand are clean so that the charging works properly.
• Maintain the tip surface clean and tinned prior to storage in order to avoid tip oxidation. Rusty and dirty surfaces reduce heat transfer to the solder joint.
• Do not use liquid such as alcohol, thinner or benzene to clean the console.
• Repairs should only be performed by a JBC authorized technical service.

Safety

It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.

• Do not use the units for any purpose other than soldering or rework. Incorrect use may cause a fire.
• The power cord must be plugged into approved bases. When unplugging it, hold the plug, not the wire.
• Do not work on electrically live parts.
• The tool should be placed in the stand when not in use in order to charge the batteries.
• The soldering tip or nozzle, the metal part of the tool and the stand may still be hot even when the station is turned off.
• Do not leave B115 Tool unattended when it is on.
• Avoid flux coming into contact with skin or eyes to prevent irritation.
• Be careful with the fumes produced when soldering.
• Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
• Utmost care must be taken with liquid tin waste which can cause burns.
• This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning the use of the appliance and understand the hazards involved. Children must not play with the appliance.
• Maintenance must not be carried out by children unless supervised.
• Do not expose the console to high temperatures, humidity or dust. Avoid direct sunlight.
• Do not drop the console as it may cause damage or malfunction.
• Do not disconnect your device when it is in fi le transfer mode.
• Do not use the console in places where electronic devices are restricted.

Specifications

B·iRON 210
Precision Battery Soldering Station

With Console : Without Console

• Ref.: BI210UA 120 V – N. America BI210UQA 120 V – N. America, Taiwan
• Ref.: BI210IA 230 V – India BI210IQA 230 V – India
• Ref.: BI210A 230 V – Europe BI210QA 230 V – Europe
• Ref.: BI210KA 230 V – United Kingdom  BI210KQA 230 V – United Kingdom
• Ref.: BI210HA 230 V – China BI210HQA 230 V – China
• Ref.: BI210JA 100 V – Japan BI210JQA 100 V – Japan

Stand:

• Input: 100 V – 240 V 50/60 Hz
• Power: 20 W
• Tool output: 12 V / 500 mA
• USB output: 5 V / 1000 mA

Tool:

• Output Peak Power: 24 W
• Battery: Li-Ion 7.4 V / 180 mAh
• Charge Time: 30 minutes
• Temperature Range: 200 – 450 °C / 390 – 840 °F
• Idle Temp. Stability (still air): ±1.5 °C / ±3 °F
• Temp. Accuracy: ±3% (Using reference cartridge)
• Connections: Bluetooth Low Energy (BLE)
• Ambient Operating Temp: 10 – 50 °C / 50 – 122 °F
• Tool Weight : 35 g / 0.08 lb

Console:

• Screen dimension: 7” / 7in

With Console

• Total Net Weight: 1442 g / 3.18 lb
• Total Package Dimensions/Weight: 265 x 223 x 160 mm / 2000 g (L x W x H) 10.43 x 8.78 x 6.30 in / 4.41 lb

Without Console

• Total Net Weight: 978 g / 2.16 lb
• Total Package Dimensions/Weight: 225 x 223 x 160 mm / 1536g (L x W x H) 8.86 x 8.78 x 6.30 in / 3.39 lb

Complies with CE standards ESD safe
Not grounded device. No ESD discharge feature.

Warranty

JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

www.jbctools.com

References

• JBC Soldering Stations, Irons and Rework equipment for electronics
• JBC Soldering Stations, Irons and Rework equipment for electronics
• JBC Software
• Warranty Extension

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>