JBC H5450 Tool Holders for Stands Instruction Manual
- May 15, 2024
- JBC
Table of Contents
www.jbctools.com
INSTRUCTION MANUAL
H5450,
H6267, H6268,
H6269, H8036, H6272,
H6273, H6275, H6274,
H8410, H6227,
H6276, H8634, H8411
Tool Holders for Stands
H5450 Tool Holders for Stands
This manual corresponds to the following references*:
0015450 H5450 for ADS & HDS
0016268 H6268 for AMS
0028036 H8036 for ATS
0016273 H6273 for DRS
0016274 H6274 for DNS
0016227 H6227 for TES
0018634 H8634 for SFS
0016267 H6267 for APS
0016269 H6269 for HTS & HDTS
0016272 H6272 for DSS
0016275 H6275 for ALS & ALES
0028410 H8410 for NAS
0016276 H6276 for JTS
0028411 H8411 for WSBT
Packing List
The following items are included:
Tool Holder …………… 1 unit
*according to purchased reference Manual ………………….. 1 unit
Ref. 0028444
Replacement
Before carrying out maintenance, always unplug the tool. Allow the equipment to cool down. Be sure that the power supply is disconnected before changing any spare parts.
Changing the Tool Holder
Remove the locking knob (1).
Slightly separate the tool holder from the stand (max. 10 mm) and
remove the holder screw (2).
Carefully move the tool holder sidewards until the cable* comes out (3).
If necessary, use a flat screwdriver to help the connector pass through the
side hole.
Any force exerted for extraction must be applied on the connector, never on
the cable.
Place the new tool holder following the disassembling steps conversely.
*The following references come without cable connection:
– Ref. 0018634 SSFS for SFS
– Ref. 0028411 SWSBT for WSBT
Specifications
H5450, H6267, H6268, H6269, H8036, H6272, H6273, H6275, H6274, H8410, H6227,
H6276, H8634, H8411
Tool Holders for Stands
Ref.: see page 2
– Package Dimensions: 111 x 81 x 41 mm
(L x W x H) 4.37 x 3.19 x 1.61 in
Complies with CE standards
ESD Safe
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage
paid, to the dealer where it was purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>