JBC H2994 Tool Holders for Compact Stations Instruction Manual
- October 30, 2023
- JBC
Table of Contents
www.jbctools.com
INSTRUCTION MANUAL
H2994, H4706, H4720, H4719
Tool Holders for Compact Stations
H2994 Tool Holders for Compact Stations
This manual corresponds to the following references:
0012994 H2994 for CDB & CDS
0014706 H4706 for CA and CF
0014720 H4720 for CS
0014719 H4719 for CP
Packing List
The following items are included:
|
---|---
Tool Holder…………….. 1 unit
according to purchased reference| Manual ………………….. 1 unit
Ref. 0028656
Replacement
Before carrying out maintenance, always unplug the tool. Allow the
equipment to cool down. Be sure that the power supply is disconnected before
changing any spare part.
Changing the Tool Holder
Turn the station off and allow the equipment to cool down.
Remove the locking knob (1) and separate the holder from the station. Then
remove the connection screw (2).
Pull the tool holder gently until the connector comes out.
Place the new tool holder following the same steps conversely.
Specifications
H2994, H4706, H4720, H4719
Tool Holders for Compact Stations
Ref.: 0012994 H2994 for CDB & CDS
Ref.: 0014706 H4706 for CA and CF
Ref.: 0014720 H4720 for CS
Ref.: 0014719 H4719 for CP
Package Dimensions:
(L x W x H)| 111 x 81 x 41 mm
4.37 x 3.19 x 1.61 in
---|---
Complies with CE standards
ESD Safe
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage
paid, to the dealer where it was purchased.
**** This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.
www.jbctools.com
0028656-291122