QUOIZEL QFA6201MBK Islander 22 3 Blade Indoor LED Ceiling Fan Installation Guide
- June 13, 2024
- QUOIZEL
Table of Contents
INSTALLATION GUIDE
FOR QFA6201MBK
Released Date: 2023-02-01
WARNINGS AND CAUTIONS
READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble,
install or operate the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
- RISK OF PERSONAL INJURY – DO NOT bend the blades when installing the fan, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
- RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY – mount to outlet box marked (acceptable for fan support of 22.7kg(50lbs) or less) and use mounting screws provided with the outlet box.
- All set screws must be checked, and re-tightened where necessary, before installation.
- After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on the other side of the outlet box.
- Suitable for use with solid-state speed controls.
- use only with light kits marked suitable for use in damp locations.
- This unit weighs 4.9 kg (10 .78 lbs).
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Disconnect fixture from the power source before replacing bulbs or cleaning. Make sure the bulbs are given sufficient time to cool be before removing.
TOOLS REQUIRED
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS
PACKAGE CONTENTS (PARTS BAG 1)
PACKAGE CONTENTS
(PARTS BAG )2
PACKAGE CONTENTS (PARTS BAG )3
INSTALLATION
-
Install Hanger Frame
Use machine screws when securing to existing ceiling fan-rated outlet box. that supports of 50 lbs (22.72 kg) or less.
Use wood screws When securing to support structure with approved electrical outlet box. Drill 9/64” pilot holes. This fan cannot be used for the ceiling which angle is greater than 19 degree.
For angled ceilings, point opening toward peak. -
Choose Rod
-
Install Rod to Fixture Body
-
Loosen Shoulder Screws
Remove one shoulder screw from hanger frame.
Loosen the other shoulder screw approximate 1/4″ and retain it on the hanger frame. -
Install Rod to Hanger Frame
-
Install Safety Cable
-
Wiring
-
Place Controller to Hanger Frame
-
Install Ceiling Canopy
Carefully tuck all wires inside of the ceiling canopy during installation.
-
Install Ceiling Canopy Cap
-
Install Fan Blade
-
Install Bulbs
Instal l four correct bulbs referring to fixture markings and/or labels for maximum wattage.
Recommended Bulb Type (included):
-
Install Wall Bracket
ADDITIONAL FUNCTIONS
-
Install Battery to Remote Control Transmitter
OPERATION:
1. Light button :
Press it to turn on the lights. Press it again to turn off the lights. Long press it, the bulbs will be dimmable.
2. HI, MED, LOW, OFF buttons: To adjust fan speed. -
Reverse Fan Blade (Optional)****
Reverse Switch InformationSeason| Rotation Direction| Switch Position
Summer| Clockwise| Left
Winter| Counterclockwise| Right
Note:
1. If airflow is desired in the opposite direction, turn the fan off and wait
for the blades to stop turning.
2. Push the reverse switch to Left or Right completely.
Your installation is now complete! Restore electricity and save this sheet for
future reference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>