LEDOLUX ORBIT LED Lamp Instruction Manual
- June 13, 2024
- LEDOLUX
Table of Contents
LEDOLUX ORBIT LED Lamp
PRODUCT OVERVIEW
NOTE
- The terminal block is not supplied. Installation must be performed by a qualified person. In case of doubts as to the installation or use of the LED luminaire, consult the manufacturer.
- Replace the luminaire after a failure. Self-repair shall void the warranty.
- This product contains a light source with energy efficiency class A.
- Keep the luminaire in a cool, dry, and clean environment. Keep away from water and fire
- Make sure you disconnect the power supply before installation. Turn on the power after connecting and securing all luminaires in the circuit.
- The light source used in this luminaire should only be replaced by the manufacturer or their service representative, or a similarly qualified person
- Protect your eyes, and avoid looking at the light for a long period of time.
- Dirtiness that settles down on the luminaire due to normal operation shall be cleaned with a damp cloth.
- Do not use invasive cleaners or cleaning methods.
APPLICATION
- Industrial facilities
- Warehouses
- Technical rooms
- Sport facilities
Ledolux Poland Sp. z o.o.
E-mail: info@ledolux.pl
Tel: +48 696 966 622
Data: 12.12.2022
We reserve the right to make design changes to luminaires.
Make sure you disconnect the power supply before installation
- Fix the mounting bracket to the luminaire (hook M10, 10Nm).
- Drill a hole in the ceiling and install the hook.
- Hang luminaire
- Connect the luminaire according to the wire markings.
- Keep it watertight while connecting it.
- Drill a hole in the ceiling, install screws.
- Fix the mounting bracket to the luminaire using a hex wrench (4mm, 3Nm). Adjust the angle of tilt of the luminaire and lock the holder with a hex key (6mm, 5Nm). Attach the luminaire to the wall/ construction.
- Connect the luminaire according to the wire markings. Keep it watertight while connecting it
NOT INCLUDED
Connecting the power cable
Connecting the dimming cable
When no dimming, secure dimming cables – separate and isolate each one.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>