VOLTCRAFT 2250944 Videoscope Insertion Cable 30 m User Guide
- June 13, 2024
- VOLTCRAFT
Table of Contents
Videoscope Insertion Cable 30 m
Item No. 2250944
Important Information
Intended use
The product is an insertion cable for use with a videoscope display/control
unit and camera head. Applications include insertion into drainage pipes,
ventilation conduits, plumbing, and other non-destructive inspection.
Important
Only use this product and any connected peripherals in voltage free systems.
Only use in fresh water with a neutral pH value.
Do not use on humans or animals.
Do not insert the cable past adaptor connector For safety and approval
purposes, you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be dam-
aged. In addition, improper use can result in short circuits, fires, electric
shocks or other hazards. Read the instructions carefully and store them in a
safe place. Make this product available to third parties only together with
its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery content
- 30 m cable and reel
- 360° ball mount with double socket arm
- Adapter cable
- Hook & loop reel strap
- Important information
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.http://www.conrad.com/downloads
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to
your health, e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate
important information in these operating instructions. Always read this
information carefully.
Safety instructions
Read this information carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper
handling, we assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
a) General information
-
The device is not a toy. Keep it out of the reach of children and pets.
-
Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
-
Protect the appliance from extreme temperatures, direct sunlight, strong jolts, flammable gases, steam and solvents.
-
Do not place the product under any mechanical stress.
-
If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses. -
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
-
Consult an expert when in doubt about the operation, safety or connection of the appliance.
-
Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
-
If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel.
b) Connected devices
- Also observe the safety and operating instructions of any other devices which are connected to the product.
c) Product
-
This product and any connected pe- ripherals are only suited for inspection in voltage-free systems. Make sure all system components are voltage-free before inspection.
-
The equipment is made of metal and can cause short-circuiting.
-
Avoid heavy mechanical loads and/or vibrations.
-
Only for use in fresh water with a neutral pH value. Do not expose to:
– Acidic, alkaline, or caustic solutions.
– Oil or petrol
– Salt water -
Insertion cable: observe the minimum bend radius.
Connection
This product should be used together with compatible components.
For example: videoscope control unit/display ↔ adaptor cable ↔ insertion
cable↔ camera head.
Refer to the information included with each component for further details.
Care and cleaning
Important
- Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause damage to the housing and malfunctioning.
- Do not get any open cable connectors wet!
- If needed, run fresh water over the cable and use a lint free cloth to wipe the cable as it is being wound back into the reel.
- Allow the cable and reel to drip/air dry before storing away.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection
of the environment.
Technical data
Connector ………………………………. ø25 mm
Adaptor cable length ………………… 1 m
Minimum bend radius ………………. >12 cm
Operating/storage conditions …….. -20 to +60 °C
Probe cable ……………………………. ø7 mm x 30 m
Dimensions (W x H x D) …………… 42 x 42 x 14 cm
Weight …………………………………… approx. 5.71 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com). All rights including
translation reserved. Reproduction by any method, e.g. photocopy,
microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is
prohibited. This publication represents the technical status at the time of
printing.
Copyright 2021 by Conrad Electronic SE.
*2250944_v1_0321_02_dh_ss_en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>