VIVO DESK-V000S 32 Standing Desk Converter Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
VIVO DESK-V000S 32 Standing Desk Converter
Product Information
SKU: DESK-V000S/SD/SN/SW
The Desk Riser is a versatile product that allows you to convert your regular
desk into a standing desk. It provides an adjustable work surface for improved
ergonomics and productivity. The Desk Riser comes with various accessories and
is designed to support a maximum weight capacity of 26lbs (13kg) on the
desktop and 5lbs (2kg) on the keyboard tray.
Package Contents:
- (x1) Desk (A)
- (x2) Tray Brackets (B)
- (x1) Keyboard Tray (C)
- (x2) Cable Ties (D)
- (x2) Pad (E)
- (x1) Baffle (F)
- (x6) M5x12mm Flat Head Screw (S-A)
- (x6) M5x12mm Round Head Screw (S-B)
- (x2) M4x10mm Round Head Screw (S-C)
Tools Needed:
- Scissors
- Phillips Screwdriver
WARNING!
CHOKING HAZARD – SMALL PARTS: Not for children under 3 years. Adult
supervision is required.
Product Usage Instructions
Assembly Steps:
Step 1:
Carefully turn Desk (A) upside down on a flat surface. Use scissors to cut
the shipping ties. Press side lever to slowly lift and raise Desk (A) to fully
adjusted position.
Step 2:
Secure Tray Brackets (B) to pre-drilled holes in Keyboard Tray (C) using
M5x12mm Flat Head Screw (S-A) and a Phillips screwdriver. Apply Pads (E) to
the front side of Tray (C). Install Baffle (F) to Keyboard Tray (C) using
M4x10mm Round Head Screws (S-C) and a Phillips screwdriver.
Step 3:
Flip Desk (A) upside down and attach tray assembly to the underside of the
desktop using M5x12mm Round Head Screw (S-B) and a Phillips screwdriver.
Step 4:
Return desk assembly upright and place accessories as desired. Use Cable
Ties (D) to organize cords.
CAUTION!
Keep the monitor and laptop base fully on the desktop. Follow the cable
routing instructions to avoid pinching cables. Leave enough slack in cables to
allow for full range of vertical motion (15 / 38 cm). Raise the desktop slowly
to keep items stable.
If you have any questions or need further assistance, please contact our dedicated support team:
- Phone: 309-278-5303
- Email: help@vivo-us.com
- Website: vivo-us.com
- Live Chat: Chat live with an agent on our website
We are available Monday to Friday from 7:00am to 7:00pm CST. Our support team aims to provide immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us for replacements.
- For more VIVO products, please visit our website at vivo-us.com.
- Love your new VIVO setup and want to share? Tag us in your photo on social media! @vivo_us
Last Updated: 02/10/2023 REV2V
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut.
Pinch points are created during lifting and lowering the work surface. Failure
to follow these instructions may result in serious personal injury.
ASSEMBLY STEPS
STEP 1
- Carefully turn Desk (A) upside down on a flat surface. Use scissors to cut the shipping ties.
- Press side lever to slowly lift and raise Desk (A) to fully adjusted position.
STEP 2
- Secure Tray Brackets (B) to pre-drilled holes in Keyboard Tray (C) using M5x12mm Flat Head Screw (S-A) and a Phillips screwdriver. Apply Pads (E) to front side of Tray (C). Install Baffle (F) to Keyboard Tray (C) using M4x10mm Round Head Screws (S-C) and a Phillips screwdriver.
STEP 3
Flip Desk (A) upside down and attach tray assembly to underside of desktop
using M5x12mm Round Head Screw (S-B) and a Phillips screwdriver.
STEP 4
Return desk assembly upright and place accessories as desired. Use Cable Ties
(D) to organized cords.
CAUTION!
- Keep monitor and laptop base fully on the desktop.
- Follow the cable routing instructions to avoid the potential to pinch cables.
- Leave enough slack in cable to allow for full range of vertical motion (15” / 38 cm).
- Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
-
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S -
www.vivo-us.com Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M -
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
SKU: DESK-V000S/SD/SN/SW
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-v000s.
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
- help@vivo-us.com
- www.vivo-us.com Chat live with an agent!
- 309-278-5303
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com.
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 32" Standing Desk Converter – VIVO - desk solutions, screen mounting, and more