VIVO STAND-TV01B Black Mobile Cart for 32 to 83 TVs Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
VIVO STAND-TV01B Black Mobile Cart for 32 to 83 TVs
Product Information
- Product Name: Black Mobile TV Cart
- SKU: STAND-TV01B
- Manufacturer: VIVO
- Website: https://vivo-us.com/products/stand-tv01b
- Contact Information:
- Email: help@vivo-us.com
- Website: www.vivo-us.com
- Phone: 309-278-5303
- Support Hours: Monday-Friday, 7:00am-7:00pm CST
Product Usage Instructions
- Step 1: Remove the plastic covers from the Base (C). Attach the Back Feet (A) and Front Feet (B) to the Base using the provided M8x65mm Screws (P-A), Metal Spacers (D), and M8 Nuts (P-F). Tighten the screws using the 5mm Allen Wrench (P-H) and Wrench (P-G). Thread the Casters (E) and Locking Casters (F) intothe bottom of the feet using the Wrench (P-G). Reattach the plastic covers.
- Step 2: Press the button on the bottom half ofthe Poles (G) to extend them. Slide the button into the top hole to secure the desired pole length. Insert the Cable Grommets (H) into the holes as shown in the diagram.
- Step 3: Insert the Poles (G) into the Base (C) and secure them using the provided M10x35mm Screws (P-C) and M10 Washers (P-D). Tighten the screws using the 8mm Allen Wrench (P-I).
- Step 4: Attach the Plate (I) to the Poles (G) at the desired height using the provided M8x60mm Screws (P-B), M8 Washers (P-E), and M8 Nuts (P-F). Tighten the screws using the 5mm Allen Wrench (P-H) and Wrench (P-G).
- Step 5: Slide the Shelf Brackets (L, K) into the Shelves (J).
- Step 6: Mount the shelf assemblies to the Poles (G) by hanging the hooks in the slots at the desired heights. Use the Shelf Clips (O) to lock the shelves into place.
- Step 7: Attach the TV Brackets (N, M) to the back of the television using the provided Screws (M-A through M-F) and M8 Washers (M-E). Use a Phillips head screwdriver. Spacers (M-F, M-G) may be required.
- Step 8: Hang the TV Brackets (M, N) with thetelevision on the Plate (I) and tighten the security screws on thebottom of the brackets using a Phillips screwdriver to securethem.
- Step 9: Route the cables through the Cable Grommets (H) in the Poles (G). Adjust as desired.
If you have any questions or encounter any issues during the assembly process, please contact our support team for immediate assistance.
WARNING
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
PACKAGE CONTENTS
TOOLS NEEDED
- DO NOT EXCEED WEIGHT CAPACITY.
- Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Remove plastic covers from Base (C). Attach Feet (A,B) using M8x65mm Screws (P-A) Metal Spacers (D) and M8 Nuts (P-F). Tighten using 5mm Allen Wrench (P-H) and Wrench (P-G). Thread Casters (E,F) into bottom of feet using Wrench (P-G). Reattach plastic covers.
STEP 2
- Press button on bottom half of Poles (G) to extend the two halves. Slide button into top hole to secure pole length. Insert Cable Grommets (H) into holes as shown in diagram.
STEP 3
- Insert Poles (G) into Base (C) and secure using M10x35mm Screws (P-C) and M10 Washers (P-D). Tighten using 8mm Allen Wrench (P-I).
STEP 4
- Attach Plate (I) to Poles (G) using M8x60mm Screws (P-B), M8 Washers (P-E) and M8 Nuts (P-F) at the desired height. Tighten using 5mm Allen Wrench (P-H) and Wrench (P-G).
STEP 5
- Slide Shelf Brackets (L,K) into Shelves (J).
STEP 6
- Mount shelf assemblies to Poles (G) by hanging the hooks in the slots at the desired heights as shown in below. Use Shelf Clips (O) to lock shelves into place.
STEP 7
- Attach TV Brackets (N,M) to back of television using Screws (M-A through M-F) and M8 Washers (M-E) using Phillips head screwdriver. Spacers (M-F, M-G) may be required.
STEP 8
- Hang TV Brackets (M, N) with television on Plate (I) and tighten security screws on the bottom of brackets with a Phillips screwdriver to secure.
STEP 9
- Route cables through Cable Grommets (H) in Poles (G). Adjust as desired.
Love your new VIVO setup and want to share?
- Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303
- AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com
- Chat live with an agent!
- AVG. RESOLUTION TIME (within office hrs): < 15 M
- help@vivo-us.com
- AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo- us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Black Mobile Cart for 32" to 83" TVs – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>