PROJECTA LB200-HD 12V 200Ah High Discharge Lithium Battery Instruction Manual

June 13, 2024
Projecta

PROJECTA-logo

PROJECTA LB200-HD 12V 200Ah High Discharge Lithium Battery

PROJECTA-LB200-HD-12V-200Ah-High-Discharge-Lithium-Battery-
product

Product Information

The INTELLI-GRID 12V LiFePO4 200Ah LITHIUM BATTERY (P/No. LB200-HD) is a high- performance lithium battery designed forvarious applications. It features temperature and short circuit protection, ensuring safe and reliable operation.

This battery is equipped with an optional remote battery monitor (LBM-BT, sold separately, P/No. LBM-BT) that allows you to monitor the battery’s status remotely.

When connecting multiple batteries in series or parallel, a correction factor of 0.75 needs to be applied to determine the true continuous discharge current. For example, if you connect twoLB200-HD batteries in parallel, the continuous discharge current would be 2 x 200Amp x 0.75 = 300Amps.

Specifications

  • Part Number: 320
  • Nominal Voltage: 325
  • Nominal Capacity: 287
  • Nominal Energy: 380
  • Charge Voltage: 230
  • Discharge Cut-off Voltage: S TORAGE & MAINTENANCE
  • Standard Charge Current: CRUSHING DURING TRANSPORTATION
  • Maximum Charger Current: 3
  • Maximum Discharge Current: WARRANTY STATEMENT
  • Peak Discharge Current: IMPORTANT NOTE
  • Operating Temperature: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
  • Maximum Number of Batteries in Parallel: Distributed by
  • Number of Discharge Cycles: AUSTRALIA Brown & Watson International Pty. Ltd. Knoxfield Victoria 3180 Phone: (03) 9730 6000 Fax: (03) 9730 6050 National Toll Free: 1800 113 443
  • Weight: NEW ZEALAND OFFICE Griffiths Equipment Ltd. 19 Bell Avenue, Mount Wellington, Auckland 1060, New Zealand Phone: (09) 525 4575
  • IP Rating: IS525 Issue 1 10.02.23

Product Usage Instructions

To use the INTELLI-GRID 12V LiFePO4 200Ah LITHIUM BATTERY:

  1. Ensure that the battery is properly installed and connected to your device or system.
  2. If you have the optional remote battery monitor (LBM-BT),follow the instructions provided with the monitor to connect and set it up.
  3. When connecting multiple batteries in series or parallel, apply a correction factor of 0.75 to determine the true continuous discharge current.
  4. Refer to the specifications for charge voltage, discharge  cut-off voltage, standard charge current, maximum charger current,maximum discharge current, peak discharge current, operating temperature, maximum number of batteries in parallel, number of discharge cycles, weight, and IP rating for detailed information about the battery.
  5. Follow proper storage and maintenance practices to ensure the longevity and performance of the battery.
  6. In case of a warranty claim, deliver the product to the  original place of purchase or any other nominated location alongwith the original invoice and a written explanation of the claim.
  7. For minor failures, the manufacturer reserves the right to repair or replace the product. For major failures, you may be entitled to a replacement, refund, and compensation for any foreseeable loss or damage.

FEATURES

  • 200Amp high discharge current, ideal for powering 2000W inverters.
  • Built in current shunt to provide accurate State of Charge (SOC), so there is no need to buy an additional current shunt.
  • Top-mounted battery indicator.
  • Battery switch (remote and local) to isolate the system in storage.
  • Communication ports to talk to INTELLI-RV/INTELLI-GRID systems, displays/monitors or additional batteries.
  • Lithium iron phosphate technology gives the advantage of high specific energy, long cycle life, high safety, low self-discharge and low weight (22kg).
  • Mounting feet for easy installation
  • Built-in safety features including overvoltage, undervoltage, overcurrent, high/low temperature and short circuit protection.

OPTIONAL REMOTE BATTERY MONITOR
(SOLD SEPARATELY, P/NO. LBM-BT)

  • Unlock your Projecta lithium battery’s full potential.
  • Monitor state of charge (SOC%) on LCD display.
  • Turn battery on/off remotely, handy for inverter applications.
  • Alarm and fault indication.
  • Bluetooth monitoring and control via smart phone.
  • Simply connect to the battery, no extra current shunts required.
  • Additional functionality and monitoring when used in conjunction with other INTELLI-RV/INTELLI-GRID components

CONNECTING IN SERIES OR PARALLEL

  • Ensure all batteries are fully charged before connecting in series or parallel.
  • LB200-HD can be connected in series up to 4 batteries to create a 48V 200Ah setup, or in parallel up to 4 batteries to create a 12V 800Ah setup.
  • When connecting in parallel the discharge current can be added but a discharge ratio of 0.75 needs to be applied to give you the true continuous discharge current. Forexample 2 x LB200-HD in parallel will be 2 x 200Amp x 0.75 = 300Amps continuous discharge current.

SPECIFICATIONS

PART NO. LB200-HD
NOMINAL VOLTAGE 12.8V
NOMINAL CAPACITY 200Ah
NOMINAL ENERGY 2560Wh
CHARGE VOLTAGE 14.2V
DISCHARGE CUT-OFF VOLTAGE 11.2V
STANDARD CHARGE CURRENT 200 Amps
MAXIMUM CHARGER CURRENT 200 Amps
MAXIMUM DISCHARGE CURRENT 200 Amps
PEAK DISCHARGE CURRENT 300 Amps (10Mins)
OPERATING TEMPERATURE -20°C ~ 60°C
MAXIMUM NUMBER OF BATTERIES IN PARALLEL 4
NUMBER OF DISCHARGE CYCLES 3000
WEIGHT 22KG
IP RATING IP20

STORAGE & MAINTENANCE

  • To ensure a longer battery lifespan, recharge fully every 3-6 months.
  • Ensure battery terminals and screw holes are clean and securely connected.
  • If the load connected to battery won’t be used for extended periods, disconnect the battery from the load to prevent battery discharge and over-discharge or turn the battery off.
  • Insulation and shockproof materials should be used to avoid sudden collisions or crushing during transportation.

WARRANTY STATEMENT
Brown & Watson International Pty Ltd (“BWI”) of 1500 Ferntree Gully Road, Knoxfield, Vic., telephone (03) 9730 6000, fax (03) 9730 6050, warrants that all products described inits current catalogue will under normal use and service be free of failures in material and workmanship for a period of three (3) years from the date of the original purchase by thecustomer as marked on the invoice. This warranty does not cover ordinary wear and tear, abuse, alteration of products or damage caused by the purchaser. To make a warranty claim the consumer must deliver the product at their cost to the original place of purchase or to any other place which may be nominated by either BWI orthe retailer from where the product was bought in order that the warranty assessment may be performed. The consumer must also deliver the original invoice evidencing the date and place of purchase together with an explanation in writing as to the nature of the claim. In the event that the claim is determined to be for a minor failure of the product then BWI reserves the right to repair or replace it at its discretion. In the event that a major failure is determined, the consumer will be entitled to a replacement or a refund as well as compensation for any other reasonably foreseeable loss or damage. This warranty is in addition to any other rights or remedies that the consumer may have under State or Federal legislation.

IMPORTANT NOTE
Our goods come with guarantees that cannot be excluded under the Australian Consumer  Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

WARNING

  • Do not charge beyond 14.6VDC continuously over 24 hours, or using a charger with automatic desulfation.
  • Do not short-circuit or reverse polarity.
  • Do not disassemble, deform or modify battery.
  • Store in a cool, dry and well-ventillated area.
  • Charge battery at least every 6 months or when the voltage drops below 12.8VDC.
  • Ensure battery is fully discharged before proper disposal.

P/No. LB200-HD

Distributed by AUSTRALIA Brown & Watson International Pty. Ltd. Knoxfield Victoria 3180

  • Phone : (03) 9730 6000
  • Fax : (03) 9730 6050
  • National TollFree : 1800 113 443

NEW ZEALAND OFFICE
Griffiths Equipment Ltd. 19 Bell Avenue, Mount Wellington, Auckland 1060, New Zealand

  • Phone : (09) 525 4575

IS525
Issue 1 10.02.23

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals