Arenti 3T AInanny-Cam-Baby Smart Baby Monitor User Manual

**Arenti 3T AInanny-Cam-Baby Smart Baby Monitor User Manual

**

Product description

Please read this manual carefully before using the product and keep it properly. Label information is located on the side of the camera.

LED Indicator:

• Constant blue: Connection succeeded
• Blue flashing slowly: Manual configuration mode
• Red flashing slowly: Waiting to connect
• Red flashing fast: Network abnormalt

Packing list

• Camera

• Headgear

• Bracket

• Screws

• Reset pin

• Power cable

• Power adapter

• Quick guide

Set up Camera

What you’ll need：

• Wi-Fi and a working broadband Internet connection with at least  Mbps upload speed.
• A phone or tablet with iOS Android  or later.
• A power outlet.

How the system works
After camera connects with WIFI, allows you to check the view anytime and anywhere via Arenti APP.

Power on
Plug the power cable into the power port on the back of the camera, the camera will automatically turn on, wait for the 30s, the indicator light will flash red slowly means boot up is finished.
Tip: Do not move the lens of the camera to force it to rotate after turning it on.

Connect Arenti APP
Scan QR code to download and install the Arenti APP. Also, you can search “Arenti” on App Store (IOS) or Google Play (Android). Download and install Arenti APP. Open APP home page, Click “+” at the right top page. Follow the guide on the APP to add the camera step by step.

After connection is successful, the indicator is solid blue.

Troubleshooting

Camera is not powering on:

1. Try to use another outlet.
2. Try to use another 5V power adapter/cable to power up the camera.

Failed to scan the QR code from Arenti APP:

1. Remove the film from the Camera Lens.
2. Keep distance 10-15 cm (4-6 inch) between the camera and mobile phone.
3. Confirm the camera indicator is red flashing slowly.

Failed to connect WiFi:

1. Please confirm Scan QR code successfully: After scanning, the camera has the prompt sound, network indicator turns to red fast flashing;
2. Please ensure input the correct WiFi password, the WiFi password you set not contain special characters such as =\’;.;
3. Make sure the WiFi band meets the network requirement of camera, camera only supports 2.4GHz;
4. Change the encryption of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
5. Please confirm camera is near the WiFi router.
   If there doesn’t work, please contact [email protected] to get help.

Installation

Find a position where you can get the desired field of view. You can put the camera on a flat surface or mount it on the wall.

Tips:

1. The installation wall needs to be able to bear at least 3 times the total weight of the camera.
2. In case your camera is mounted upside down, its picture shall be flipped as well. Please set from Arenti App >> Device (tap device to live video page) >> Settings >> Basic Function >> Image Setting >> Screen Flip
3. Do not point the camera toward a glass window. Or it may result in poor image performance because of the window glare by infrared LEDs, ambient lights or status.

Camera Using tips

Live video viewing:
In the camera control interface of APP, you can view the camera monitoring in real-time, adjust the resolution, capture images, record video, and make 2-way talking

Infrared night vision:
The camera can automatically switch to night vision mode (black&white) at night according to the degree of change in surrounding light. With built-in red Infrared LED lights, the night vision distance can reach 10 meters, and it can be viewed super clearly in the dark.

Motion detection:
The camera can detect the movement changes in the camera’s view, and push the notification of the movement changes to the APP.
Set from: APP >> Device (tap device to live video page) >> Settings >> Alert Settings >> Motion Detection.

Basic Parameter

Monitor Using tips

· Pairing of camera and monitor:

1. Pair the monitor and camera:
2. Press Menu button on the monitor screen, and select > Camera.
3. Select Camera 1 or Camera 2 which you need to pair.
4. Long press the camera pairing button until you hear the prompt tone.
5. Press OK button on the monitor screen to start pairing.
6. For 2 cameras, repeat step 2 ~ step 4.
7. Unbind the monitor and camera:
8. Press Menu button on the monitor screen, and select > Camera.
9. Select Camera 1 or Camera 2 which you need to unbind.
10. Long press OK button to release the binding.
    

Camera selection method:

Note：

• For different products, you may add 1 or 2 cameras. If you have added 2 cameras, the monitor screen will display 2 live views at the same time.
• If you want to set parameters or enable functions of one of the cameras, you need to select the camera first.

On home page, press button to switch camera between Cam 1 and Cam 2 if you have added two cameras.

If you have added two cameras, select one camera you need and press OK button on monitor to enter full screen viewing mode. And then you can press button again to zoom in and zoom out. (Zooming function does not work when the screen is not in full screen.)

Rotate the camera

You can adjust the monitoring angle for a better vision.
The direction buttons on the monitor screen are available when the camera is powered on.
Press direction buttons to rotate the camera horizontally and vertically, for a better vision

For more details of Monitor functions, please refer to the kit manual.

FAQ

How to disable the LED indicator/blue light with my camera?

Arenti APP >> Device (tap device to live video page) >> Settings >> Basic Function >> Network Indicator: Disable it

How to turn off camera real-time monitor, and stop recording ?

Arenti APP >> Device (tap device to live video page) >> Settings >> Basic Function >> Privacy Protection >> Lens OFF.

How to change WiFi or update WiFi password for device?

How to share Arenti devices with friends and family?

Arenti APP >> Device (Tap device to live video page) >> Settings >> Device Share >> Add, follow the guide to share your device.

Failed to access the Live video, prompts offline?

Precautions

• The applicable working temperature of this product is 0℃~40℃, please do not use it in an environment where the temperature is too high or too low use this product.
• To use this product better, avoid the front and side of the lens close to the glass, white walls, etc. light objects, so as not to cause the picture to be bright near, dark, or whitish in the distance.
• Please make sure that the camera is installed within the range covered by Wi-Fi signal, and placed as far as possible on the location where the signal is better, and try to install it away from metal and microwave ovens that may affect the signal.

After-Sale Service and Technical Support

• Access Support Articles, Videos, and Documentation. www.arenti.com/support/
• Access Support from the Arenti App, Simply login your Arenti App tap to get support.
• You can send an email to [email protected]. Describe the camera issue, inform us the camera model and SN from the camera body. We will reply to you in 24h.

Legal notice

Symbols: Direct current (DC) 

Don’t throw batteries or out of order products with the household waste (garbage).
The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.

Hereby, Arenti, declares the radio equipment type ‘AInanny-Cam’ is in compliance with the Directive 2014/53/EU
The full test of the EU declaration of conformity is available at the Internet address: www.arenti.com

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Safety Information

Power Adapter Safety:

1. The power plug is intended to serve as a disconnect device.Do not drop or cause an impact to the power adapter.
2. If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens,stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.
3. Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.

Child’s safety

1. Comply with all precautions with regard to child’s safety. Letting children play with the device or itsaccessories may be dangerous.
2. The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.

Operation safety

1. Use the device under allowed humidity and temperature conditions.
2. Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it,to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering.
3. Observe local laws and regulations, and respect the privacy and legal rights of others.

© 2023. All rights reserved. All trade names are registered trademarks of respective companies Apple, the Apple logo, iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. Google, the Google logo, Android are trademarks of Google Inc. App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.

References

• Arenti: Best Baby Monitor & Indoor/Outdoor Security Camera
• Arenti security cameras
• Arenti: Best Baby Monitor & Indoor/Outdoor Security Camera

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>