BENQ SX912 DLP Projector Replacement Remote Control User Guide

BENQ SX912 DLP Projector Replacement Remote Control

Introduction

Thanks for Choosing the BENQ SX912 DLP Projector Replacement Remote Control. Introducing the BENQ SX912 DLP Projector Replacement Remote Control – your gateway to seamless control and convenience for your BENQ SX912 DLP projector. This sophisticated replacement remote control is designed to enhance your projector experience by providing you with an intuitive and efficient way to manage your presentations, videos, and settings. Say goodbye to the limitations of manual controls and embrace a new level of versatility and ease with the BENQ SX912 DLP Projector Replacement Remote Control.

Specifications

• Frequency: 433 MHz
• Channel: 4
• Model number: For SH910 SH960 SX912 MX662 MX710 MX766 MX712UST MX850UST
• Wireless communication: IR
• Use: Projectors
• Origin: Mainland China
• Certification: CE

What’s in the packing

Remote control with battery

Remote Control Overview

1. Toggles the projector between standby mode and on.

2. Source selection buttons
   Select an input source for display.

3. Keystone/Arrow keys
   Manually correct distorted images resulting from an angled projection.

4. MENU/EXIT
   Turns on the On-Screen Display (OSD) menu. Goes back to the previous OSD menu, exits, and saves menu settings.

5. ****Decrease the projector volume.

6. ECO BLANK
   Used to hide the screen picture.

7. LASER (No available in Japan region)
   Emits visible laser pointer light for presentation purposes.

8. ZOOM+/ZOOM
   Magnifies or reduces the projected picture size.

9. ASPECT
   Select the display aspect ratio.

10. FREEZE
    Freezes the projected image.

11. NETWORK SETTING
    Displays the Network Settings OSD menu.

12. Numeric buttons
    Enter numbers in network settings. Numeric buttons 1, 2, 3, and 4 cannot be pressed when asked to enter a password.

13. NETWORK Selects
    Network Display as the input signal source.

14. AUTO
    Automatically determines the best picture timings for the displayed image.

15. Increases the projector volume. When the On-Screen Display (OSD) menu is activated, the #3, #5, and #15 keys are used as directional arrows to select the desired menu items and to make adjustments.

16. MODE/ENTER
    Select an available picture setup mode. Activates the selected On-Screen Display (OSD) menu item.

17. SOURCE
    Displays the source selection bar.

18. PAGE +/PAGE –
    Operate your display software program(on a connected PC) which responds to page up/down commands (like Microsoft PowerPoint).

19. MIC/VOL +/MIC/VOL –
    The function is not available on this projector.

20. MUTE
    Toggles projector audio between on and off.

21. SMART ECO
    Switch the lamp mode between Eco/Normal and SmartEco.

22. QUICK INSTALL ( “TEST” is for the Japan region) Displays the Quick Install OSD menu

Operating the LASER pointer

The Laser Pointer is a presentation aid for professionals. It emits a beam of red light when you press it. The laser beam is visible. It is necessary to press and hold LASER for continuous output.

Do not look into the laser light window or shine the laser light beam on yourself or others.

See the warning messages on the back of the remote control prior to using it. The laser pointer is not a toy. Parents should be mindful of the dangers of laser energy and keep this remote control out of the reach of children.

Remote control effective range

The infrared (IR) remote control sensor is located on the front and rear of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector’s IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infrared beam.

Replacing the remote control battery

1. To open the battery cover, turn the remote control over to view its back, push the finger grip on the cover, and slide it up in the direction of the arrow as illustrated. The cover will slide off.
2. Remove any existing batteries (if necessary) and install two AAA batteries observing the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and negative (-) goes to negative.
3. Refit the cover by aligning it with the base and sliding it back down into position. Stop when it clicks into place.

• Avoid excessive heat and humidity.
• There may be battery damage if the battery is incorrectly replaced.
• Replace only with the same or equivalent type recommended by the battery manufacturer.
• Dispose of the used battery according to the battery manufacturer’s instructions.
• Never throw a battery into a fire. There may be a danger of an explosion.
• If the battery is dead or if you will not be using the remote control for a long time, remove the battery to prevent damage to the remote control from possible battery leakage.

Care and Maintenance

Keep it Clean:

• Regularly clean the remote control’s exterior with a soft, lint-free cloth to remove dust, dirt, and fingerprints.
• Avoid using abrasive materials or harsh chemicals that could damage the surface.

Battery Maintenance:

• Check the batteries periodically and replace them when they become weak or depleted.
• When not in use for an extended period, remove the batteries to prevent potential leakage and damage.

Avoid Impact:

• Handle the remote control with care and avoid dropping it, as physical damage can affect its performance.

Storage:

• Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep it away from moisture and humidity to prevent internal damage.

Use Properly:

• Operate the remote control within the specified range and angle for effective communication with the projector.
• Avoid exposing it to excessive heat, which can negatively impact its components.

Replacement Parts:

• If you encounter issues with the remote control, consider contacting the manufacturer or authorized service centers for replacement parts or repairs.

Keep it Handy:

• Store the remote control in a designated and easily accessible location to ensure you can use it whenever needed.

Protect the Buttons:

• Avoid pressing the buttons too hard, as excessive force can lead to button wear or damage over time.

Troubleshoots

Issue: Remote Control is Not Responding

• Check Batteries: Ensure that the batteries in the remote control are not depleted. Replace them with fresh batteries and make sure they are inserted correctly, matching the polarity (+ and -).
• Battery Contacts: Inspect the battery contacts in the remote control and clean them if they are dirty or corroded. Use a clean, dry cloth or a cotton swab with a small amount of rubbing alcohol.
• Obstruction: Make sure there are no obstructions between the remote control and the projector. Ensure a clear line of sight between the two.
• Signal Interference: Check for sources of interference, such as other electronic devices emitting strong infrared signals. Move any interfering devices away from the projector and remote control.

Issue: Remote Control is Inconsistent

• Low Battery: Even if the batteries are not completely depleted, they may be too weak to transmit a strong signal. Replace the batteries with new ones to ensure consistent performance.
• Clean the Remote: Dust and dirt on the remote control’s surface or infrared transmitter can affect its performance. Clean the remote control as mentioned in the care and maintenance section.

Issue: Buttons are Not Working

• Button Wear: Over time, the buttons on the remote control may wear out. Inspect the buttons for physical damage or wear and consider replacing the remote control if necessary.

Issue: Remote Control is Non-Responsive After Battery Replacement

• Battery Placement: Double-check that the batteries are correctly inserted with the right polarity. Incorrect placement can prevent the remote control from functioning.

Issue: The Remote Control Range is Limited

• Range Limitation: Remote control signals have a limited range. Ensure you are operating the remote control within the specified range as mentioned in the user manual.
• Weak Batteries: Weak batteries can reduce the range of the remote control. Replace the batteries with new ones for improved range.

FAQs

What is the BENQ SX912 DLP Projector Replacement Remote Control?

The BENQ SX912 DLP Projector Replacement Remote Control is a specialized remote control designed for use with the BENQ SX912 DLP projector. It allows users to conveniently control the projector's functions, settings, and navigation from a distance.

How does the replacement remote control work?

The replacement remote control works by transmitting infrared signals to the BENQ SX912 DLP projector. These signals are interpreted by the projector, allowing users to perform various functions, such as powering the projector on/off, adjusting settings, navigating menus, and more, without the need for direct physical contact with the projector.

Is the replacement remote control compatible with other projector models?

No, the BENQ SX912 DLP Projector Replacement Remote Control is specifically designed for use with the BENQ SX912 DLP projector. It may not be compatible with other projector models or brands.

How do I pair the replacement remote control with my BENQ SX912 DLP projector?

In most cases, the replacement remote control does not require pairing as it is pre-configured to work with the BENQ SX912 DLP projector. Simply insert fresh batteries, and the remote control should function without additional setup.

What should I do if the replacement remote control is not responding?

If the replacement remote control is not responding, you can try the following steps: Check the batteries to ensure they are correctly inserted with the right polarity. Make sure there are no obstructions between the remote control and the projector. Verify that the batteries are not depleted and replace them with new ones if needed. Clean the remote control's surface and infrared transmitter to remove any dust or dirt that may interfere with the signals.

Can I use the replacement remote control for all functions of the BENQ SX912 DLP projector?

Yes, the replacement remote control is designed to provide access to all essential functions and settings of the BENQ SX912 DLP projector. You can use it to control power, input sources, menu navigation, volume adjustment, and more.

Is the replacement remote control durable?

The replacement remote control is designed for durability and longevity. However, like any electronic device, it should be handled with care to prevent physical damage.

Can I purchase replacement parts for the remote control if needed?

Replacement parts for the remote control, such as buttons or battery covers, may be available through the manufacturer or authorized service centers. Contact the manufacturer's customer support for assistance.

Is the remote control covered by a warranty?

The warranty coverage for the replacement remote control may vary. Check the warranty details provided with your purchase to understand the extent of warranty protection.

What should I do if the remote control's buttons are not working?

If the buttons on the remote control are not working, it may be due to wear or physical damage. Inspect the buttons for any signs of wear and consider replacing the remote control if necessary.

Is the remote control compatible with universal remote control systems?

The remote control is designed to work specifically with the BENQ SX912 DLP projector and may not be compatible with universal remote control systems. Its functionality is tailored to the projector's features.

Where can I purchase the BENQ SX912 DLP Projector Replacement Remote Control?

You can typically purchase the replacement remote control from authorized BENQ dealers, online retailers, or through the manufacturer's official website. Be sure to verify the authenticity of the seller and check for genuine replacement parts.

Can I use the remote control for other devices, such as a DVD player or TV?

The remote control is specifically designed for the BENQ SX912 DLP projector and may not be compatible with other devices. Its functionality is optimized for controlling the projector's functions and settings.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>