MEE audio M6 PRO Universal-Fit Noise-Isolating Musician’s In-Ear Monitors M6PROG2 User Manual
- June 8, 2024
- mee audio
Table of Contents
QUICKSTART GUIDE
P EERRFE CCTT O NN A NNDD O FF T HHEE S TTAAGGE
UNIVERSAL-FIT NOISE-ISOLATING
MUSICIAN’S IN-EAR MONITORS
2 NNDD GGEENNEERRAT IIOON
HOW TO WEAR FIT VIDEO
Before first use, watch our fit video by visiting
MEEaudio.com/PROhelp or scanning the QR code:
IMPORTANT
Please read this quick start guide in its entirety to ensure best fit and
sound
QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:30pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
LIFETIME REPLACEMENT
Things don’t always go according to plan in the real world. Whether your headphones get crushed, shredded, fried, misplaced, or carried off by army ants, we’ve got you covered. Just tell us what happened and we’ll give you a new pair at half price, no questions asked (note: we reserve the right to ask for more of a great story). Visit www.MEEaudio.com/LRP for more information or to request a replacement.
PACKAGE CONTENTS
A. M6 PRO In-Ear Monitors
B. Stereo audio cable
C. Stereo headset cable
D. Carrying case
E. ¼” (6.3mm) adapter
F. Comply™ memory foam ear tips
G. Silicone ear tips (6 pairs)
H. Shirt clips (2)
I. User Manual
STEP 1 – SELECTING EARTIPS
Multiple sets of eartips are included to ensure you get the best fit with your
headphones.
The correct eartips for your ear will allow the earpieces to fit flush, reduce
outside noise, and provide good bass response.
Install eartips as shown. Make sure eartips are installed securely before use.
MEMORY FOAM EARTIPS
STEP 2 – WEARING THE M6 PRO
Identify the right and left earpieces.
Straighten the memory wire and put each earpiece in the corresponding ear.
Adjust each earpiece until it fits flush in your ear and the eartip seals the
ear canal.
Holding the earpiece in place, bend the memory wire around your ear to achieve
a conforming fit.
While pulling the cable gently with one hand, squeeze the memory wire behind
your ear with the other hand until the fit is tight and secure.
Tighten the sliding cable cinch for the most secure fit.
Use the shirt clip to control cable movement.
STEP 3 – REPLACING THE CABLE
The M6 PRO includes two detachable, interchangeable cables – an audio-only
cable and a headset cable with built-in microphone and remote.
Additional cable types, replacement parts, and other accessories are available
at www.MEEaudio.com/PROhelp.
To detach the cable, grasp the earpiece and cable connector firmly, and pull
straight apart without twisting.
Attach new cable by lining up the notches on the connectors with the grooves
in the earpieces as shown. Push connectors in until they fit securely.
Make sure to attach the cable connector marked “R” to the right earpiece and
the connector marked “L” to the left earpiece.
MICROPHONE & REMOTE USE
The included headset cable features an inline microphone and remote that can be used during phone calls and to control media playback.
*You may need to open the media player application for initial playback to start.
**Not all media players support this functionality.
ADDITIONAL INFORMATION
FOR ADDITIONAL SUPPORT
• View FAQs and troubleshooting guides at
MEEaudio.com/Support
• Contact us at support@MEEaudio.com
WARNING
Using headphones at high to moderate volumes for extended periods of time will
result in permanent hearing damage. It is advised you keep volume levels
moderate to low at all times for your safety. Do not use while driving a car,
cycling, operating machinery, or performing other activities that require
hearing surrounding sounds.
Keep the device and packaging out of reach of children.
WARRANTY
The M6 PRO is covered by a 1-year manufacturer warranty. For more information,
visit MEEaudio.com/Support.
HAVE A QUESTION?
Email support@MEEaudio.com
MEE audio and its logo are registered trademarks of S2E, Inc. All rights
reserved.
iPhone®, iPad®, iPod®, and Siri® are registered trademarks of Apple Inc.
Android™ is a registered trademark of Google Inc.
© 2017 Hearing Components. Comply is a trademark of Hearing Components.
MEE audio M6 PRO Universal-Fit Noise-Isolating Musician’s In-Ear-Monitors
M6PROG2 User Manual – Download [optimized]
MEE audio M6 PRO Universal-Fit Noise-Isolating Musician’s In-Ear-Monitors
M6PROG2 User Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>