TORO 21491 eTimeMaster 30 Inch 60V Lawn Mower Instruction Manual
- June 15, 2024
- Toro
Table of Contents
- Ordering Replacement Parts
- Housing Assembly
- Spindle and Blade Assembly
- Side Discharge Chute Assembly
- Grass Bag Assembly
- Motor Module and Belt Assembly
- Front Wheel and Height-of-Cut Assembly
- Rear Wheel and Height-of-Cut Assembly
- Handle Assembly
- Attachments and Accessories
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TORO 21491 eTimeMaster 30 Inch 60V Lawn Mower Instruction Manual
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference number. The reference
number for a part also appears in the parts list, along with other information
about the part. This catalog uses two special reference number formats, one to
indicate parts in a service assembly and another to indicate the quantity of a
given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The a
represents the reference number of the entire service assembly and the b
represents a sequentialnumber unique to each part within the service assembly.
For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1,6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the
reference number has the form nX y. The n represents the quantity of the part,
the X is the multiplication symbol, and the y represents the reference number.
For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.
Housing Assembly
Ref. | Part Number | Qty. | Description |
---|---|---|---|
1 | 136-5873 | 1 | Housing ASM |
3 | 145-3985-01 | 1 | Frame-30In, 60V |
4 | 133-8177 | 1 | Chute |
5 | 3230-5 | 2 | Bolt-CARR |
6 | 139-5415 | 1 | Rod-Release, Handle |
7 | 120-7018 | 1 | Grip-Lever |
8 | 121-9114 | 1 | Bracket-Door, LH |
9 | 121-9115 | 1 | Bracket-Door, RH |
10 | 145-5894 | 1 | Cover-Belt |
12 | 115-2859 | 1 | Spring-Torsion |
13 | 114-7924 | 1 | Spring-Torsion |
14 | 46-8091 | 3 | Screw-HWH |
16 | 120-5225 | 1 | Plug-Mulch |
17 | 120-6241 | 1 | Shield-Trailing |
18 | 49-2040 | 8 | Screw-HWHTF |
21 | 117-1092 | 2 | Screw-PTH |
24 | 3296-29 | 2 | Nut-Lo ck, NI |
29 | 130-2352-01 | 1 | Baffle-Control |
31 | 32144-86 | 1 | Screw-HWHTF |
39 | 133-8054 | 1 | Decal-Prop 65, Short, |
Trilingual | |||
43 | 140-3901 | 3 | Spacer-Frame, 30 In. |
44 | 108-4862 | 3 | Screw-HWH Thd Roll |
45 | 147-0471 | 1 | Plug-Button |
Spindle and Blade Assembly
Ref. | Part Number | Qty. | Description |
---|---|---|---|
1 | 121-9107 | 2 | Spindle ASM |
1:2 | 120-7935 | 2 | Spacer |
1:3 | 138-9770 | 2 | Bearing-Ball |
2 | 139-1731 | 9 | Screw-Thd Roll, HWH |
3 | 139-6612 | 2 | Shaft-Spindle |
4 | 121-9100 | 2 | Sprocket |
5 | 109-9505 | 2 | Washer-Spring |
6 | 139-1725 | 2 | Nut-Hex |
7 | 139-1728 | 1 | Bolt-HH Ft |
8 | 139-1723 | 2 | Washer-Flat |
9 | 120-2779 | 1 | Screw-HH |
10 | 119-4038 | 2 | Nut-Hex |
11 | 131-4529 | 2 | Pulley Kit |
11:2 | 131-4504 | 1 | Adapter-Bore |
11:3 | 125-2533 | 1 | Plug-Cap |
12 | 145-4016 | 1 | Bracket-Idler |
13 | 139-1730 | 2 | Screw-Shoulder, HHF |
15 | 120-5236 | 2 | Adapter-Blade |
16 | 125-2466 | 2 | Bolt-Blade |
17 | 145-4002-03 | 2 | Blade-Rotary [black] |
18 | 121-2336 | 1 | Spring-Flat |
21 | 145-4001 | 1 | Belt-Synchronous |
Side Discharge Chute Assembly
Ref. | Part Number | Qty. | Description |
---|---|---|---|
1 | 94-8072 | 1 | Decal-Danger |
6 | 1 | Side Deflector Service ASM | |
6:1 | 125-5091 | 1 | Deflector-Side |
6:2 | 127-0721 | 1 | Spring-Torsion, Cover |
6:3 | 112-6416 | 1 | Bracket-Cover |
6:4 | 99-5291 | 1 | Rod-Cover |
7 | 121-2319 | 1 | Chute-Discharge, Side |
8 | 133-9289 | 1 | Fitting-Washout |
8:2 | 133-9290 | 1 | O-Ring |
9 | 139-1700 | 2 | Screw-HWH, Thd Roll |
11 | 95-3270 | 1 | Connector-Hose |
12 | 120-9570 | 1 | Decal-Warning |
Grass Bag Assembly
Ref. | Part Number | Qty. | Description |
---|---|---|---|
1 | 121-5766-03 | 1 | Frame-Bag |
2 | 121-5770 | 1 | Bag-Grass |
3 | 139-8986 | 1 | Decal-Warning (Bag) |
Motor Module and Belt Assembly
Motor Module Assembly No. 145-5881
Ref. | Part Number | Qty. | Description |
---|---|---|---|
1 | 145-5882 | 1 | Bucket-Battery |
2 | 145-5883 | 1 | Shroud-Lower |
3 | 145-5884 | 1 | Trim-Shroud, LH |
4 | 145-5885 | 1 | Lid-Motor |
5 | 145-5886 | 1 | Heatsink-Controller |
6 | 145-5887 | 1 | Lens-LED, RH |
7 | 145-5888 | 1 | Reflector-LED, RH |
8 | 145-5889 | 1 | Trim-Shroud, RH |
9 | 145-5890 | 1 | Lens-LED, LH |
10 | 145-5891 | 1 | Reflector-LED, LH |
11 | 145-5892 | 2 | Bracket-Support, Lid |
12 | 145-5895 | 1 | Mount-Base, Motor |
13 | 145-4048 | 1 | Motor-60V |
14 | 145-5896 | 1 | Fan-Motor |
15 | 145-5897 | 1 | Shroud-Motor |
16 | 147-0403 | 3 | Receiver-Battery |
17 | 94-4496 | 20 | Screw-PPH |
18 | 112-8658 | 2 | Screw-PPH |
19 | 46-8093 | 12 | Screw-Plastite |
20 | 49-2040 | 6 | Screw-HWHTF |
21 | 114-5896 | 2 | Magnet |
22 | 95-4234 | 2 | Screw-PPH |
23 | 147-0449 | 1 | Bracket-Foam |
24 | 138-3273 | 1 | Screw-Plastic, PPH |
25 | 133-1918 | 1 | Bail Switch ASM |
26 | 130-6658 | 2 | Screw-Flange, Plastic |
27 | 145-3972 | 1 | Foam |
28 | 144-6448 | 2 | Board-Light, LED |
29 | 139-6637 | 1 | Harness-Wire |
30 | 145-1530 | 1 | Driver-LED |
32 | 147-0451 | 1 | Controller-Pmu |
33 | 147-0452 | 1 | Controller-Motor |
34 | 161-3110 | 1 | Bracket-Pmu |
Front Wheel and Height-of-Cut Assembly
Ref. | Part Number | Qty. | Description |
---|---|---|---|
1 | 46-8091 | 3 | Screw-HWH |
2 | 120-9535 | 1 | Grip-Lever |
3 | 119-4042 | 2 | Nut-HF, NI |
4 | 147-0519 | 2 | Bushing-Pivot, Front |
4:1 | 15-4318 | 1 | Resin-Nylon 66 |
5 | 139-1753 | 1 | Front Axle ASM |
6 | 120-7037-03 | 1 | Plate-HOC, LH |
7 | 120-7038-03 | 1 | Plate-HOC, RH |
8 | 120-7043 | 1 | Arm-Spring |
9 | 125-2510 | 2 | 8 Inch Wheel ASM |
10 | 147-0518 | 1 | Front Cover ASM |
10:2 | 147-0516 | 1 | Decal-Cover, Front |
11 | 700057 | 1 | Screw-HWH |
12 | 3230-23 | 6 | Bolt-CARR |
13 | 3296-29 | 6 | Nut-Lock, NI |
14 | 130-6658 | 4 | Screw-Flange, Plastic |
Rear Wheel and Height-of-Cut Assembly
Ref. | Part Number | Qty. | Description |
---|---|---|---|
1 | 137-4796 | 1 | Grip-Lever, Lift |
2 | 121-5799 | 1 | Conduit-Convoluted |
3 | 49-2040 | 2 | Screw-HWHTF |
4 | 119-4042 | 2 | Nut-HF, NI |
5 | 104-8699 | 1 | Bearing-Ball |
6 | 106-5681 | 1 | Pin-Stop |
7 | 133-2603 | 2 | Bearing-Ball |
8 | 110-7191 | 2 | Washer-Thrust |
9 | 131-5399 | 2 | Gear-Pinion, 15T |
10 | 120-3342-03 | 1 | Plate-HOC, LH |
11 | 120-3343-03 | 1 | Plate-HOC, RH |
12 | 137-9124 | 1 | Arm-Spring |
13 | 120-5209 | 1 | Key-Arm, Spring |
14 | 136-5929 | 2 | Retainer-Bearing |
15 | 131-9665 | 1 | Transmission Kit |
15:1:1 | 130-2370 | 1 | Transmission Pulley Kit |
15:2 | 130-2369 | 2 | Pin-Snap |
15:3 | 32151-61 | 1 | Ring-Retaining |
16 | 147-0404 | 2 | Cover-Gear |
17 | 147-0401 | 1 | Rear Axle ASM |
18 | 125-2509 | 2 | 10 Inch Wheel Gear ASM |
19 | 138-3233 | 1 | Mount-Bearing |
20 | 120-7026 | 1 | Spring-Extension |
21 | 120-7027 | 1 | Spring-Extension |
22 | 121-5800 | 2 | Conduit-Convoluted |
23 | 701243 | 8 | Screw-Thd Roll, HWH |
24 | 32144-4 | 1 | Screw-HWH |
25 | 32151-61 | 1 | Ring-Retaining |
26 | 36-4780 | 2 | Washer-Plain |
27 | 138-5338 | 1 | Bracket-Stop |
28 | 3296-47 | 1 | Nut-Lock,NI |
29 | 125-2497 | 1 | Decal-HOC, Rear |
30 | 130-2369 | 2 | Pin-Snap |
Handle Assembly
Ref. | Part Number | Qty. | Description |
---|---|---|---|
1 | 145-4021-05 | 1 | Handle-Lower, ASM |
2 | 145-4004-05 | 1 | Handle-Upper |
3 | 139-1694 | 1 | Bolt-Shoulder, HHF |
4 | 119-4038 | 2 | Nut-Hex |
5 | 140-2367 | 1 | Guide-Curved, LH (Rwd) |
6 | 140-2366 | 1 | Guide-Curved, RH (Rwd) |
7 | 139-5464 | 1 | Rod-Control, Traction |
8 | 139-6554 | 1 | Lever-Traction, Rwd |
9 | 140-4194 | 1 | Spring-Torsion |
10 | 139-6569 | 1 | Handle-Personal Pace, |
Curved | |||
11 | 139-6567 | 1 | Bottom-Handle, RH |
12 | 139-6568 | 1 | Bottom-Handle, LH |
13 | 94-4496 | 10 | Screw-PPH |
14 | 145-5879-03 | 1 | Bail-Brake |
15 | 139-6594 | 1 | Cable-Brake, Pp B&s |
16 | 145-4007 | 1 | Cable-Traction |
17 | 144-3179 | 1 | Starter Switch ASM |
18 | 140-4128 | 1 | Clamp-Cable |
19 | 92-2267 | 1 | Screw-Handle |
20 | 139-1699 | 1 | Washer-Flat |
21 | 137-3094 | 1 | Nut-Hex |
22 | 145-4009 | 1 | Decal-Controls |
23 | 145-5601 | 1 | Decal-Handle, Pp |
24 | 139-6577 | 1 | Pin-Handle, Pp |
25 | 132-4516 | 2 | Plug-Square |
26 | 137-3107 | 2 | Screw-Handle |
27 | 117-5976 | 2 | Knob-Handle |
28 | 114-7988 | 1 | Guide-Cable |
29 | 144-0249 | 1 | Handle-Assist, Steel |
30 | 137-3051 | 2 | Screw-HH |
31 | 136-8682 | 2 | Washer-Lock |
32 | 107-0279 | 4 | Washer |
33 | 120-9683 | 1 | Washer-Plain |
34 | 140-1324 | 1 | Decal-Controls (60V, Start) |
99 | 614249 | 2 | Tie-Cable |
Attachments and Accessories
For 21491 eTimeMaster 30in 60V Lawn Mower
Product Name Model/Part
Hi-Lift Repl Blade Kit Replacement……………………………………………………………………………………….. 20122P
60V Battery Charger 2 AMP ………………………………………………………………………………………………….. 88602
60V LI-ION Battery 2.5 AH…………………………………………………………………………………………………….. 88625
60V LI-ION, Battery 4.0 AH …………………………………………………………………………………………………… 88640
60V LI-ION Battery 6.0 AH…………………………………………………………………………………………………….. 88660
60V LI-ION Battery 7.5 AH…………………………………………………………………………………………………….. 88675
60V Rapid Battery Charger 5.4 AMP ………………………………………………………………………………………. 88605
60V LI-ION Battery 10.0 AH ………………………………………………………………………………………………….. 66810
60V Brushless Blower (Bare Tool) ………………………………………………………………………………………… 51825T
60V Brushless Trimmer (Bare Tool) …………………………………………………………………………………….
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>