syitren SN15 Turntable Player Instructions

syitren SN15 Turntable Player

INSTRUCTION

EXPLAIN
Thank you for purchasing this record player. This manual contains important information about safety, use, and disposal. Use the described product and keep this manual for future reference. If you sell or transfer it, also hand over this manual to the new owner.

SAFETY TIPS

Before using this product, please read and understand this manual.
Keep these instructions for future reference.

1. Do not use near water.

2. Use original factory power supply.

3. If the plug cannot be fully inserted into the socket, please replace the socket.
   If it is still not suitable, please contact a qualified electrician or official after-sales service.
   Do not attempt to modify the plug in any way.

4. Protect the power cord from being moved or clamped, especially at the connection points between the power plug, plug and socket, and between the cable and the speaker.

5. Do not overload wall exits or extension lines, as this can pose a fire hazard and may cause electric shock.

6. Do not push any type of object into the turntable through the opening, as they may touch dangerous voltage points, causing component short circuits and causing fires. Do not use any type of liquid liquor on the product.

7. Do not attempt to repair the record player on your own, as opening or removing parts may expose you to dangerous voltage or other hazards.
   Transfer all services to qualified service personnel,

8. Unauthorized modification or repair of a record player may result in no after-sales service,

9. Do not use accessoiries that are not recommended by the manufacturer as they may cause danger

10. Please place it on a flat and sturdy table or on a shelf for use.

11. The openings on the box are for ventilation, do not block these openings to avoid over and equipment damage.

12. During thunderstorms or when not in use for a long time, unplug the power supply of the product.

CENTRE SHAFT

1. Power socket
2. Output mode adjustment
3. AUX input socket
4. RCA output socket
5. Lid buckle
6. Counterweight
7. Singing arm lock buckle
8. Singing arm lifting rod
9. Singing arm
10. Bluetooth mode/speed adjustment
11. Tone control
12. Switch/volume adjustment
13. Power soclket
14. Pause/Start
15. Headphone output
16. Pickup
17. Turntable
18. Centre shaft

ITEMS INCLUDED

Before installing the turntable, check the packaging content to ensure that all of the following components are free from visible damage. Please keep the original packaging materials for exchange or return purposes.

1. Record player body
2. AC adapter
3. Dust cover
4. Anti slip pad
5. Counterweight
6. instructions
7.  Turntable
8. RPM converter

INSTALLING A RECORD PLAYER

1. Install the turntable on a horizontal surface.

2. To avoid the influence of vibration and sound pressure, do not install the turntable on objects such as speakers.

3. lf placed next to the radio, the record player can receive signals from the radio.
   Therefore, try to keep the record player away from the radio as much as possible.

4. If the record player is close to devices such as mobile phones and emits strong radio waves, it may produce noise.

INSTALLING DUST COVER

Insert the socket of the lid into the buckle of the record player.

Attention: Forcibly increasing the angle will damage the cover.

INSTALL TURNTABLE

1. Turn the turntable over and check the position of the belt. Ensure that the drive belt is in the middle of the ring. If the drive belt is too high or too low within this ring, it may cause the drive belt to fall off or the speed to be unstable.

2. Place the disc on the spindle, ensuring that the turntable is completely installed on the spindle.

3. Place the belt on the motor. Align the opening of the turntable with the motor, and simultaneously pull the two ends of the red ribbon connected to the belt, placing the belt on the pulley as shown in the figure.
   Be careful not to twist the belt when doing so.

4. Remove the red ribbon

INSTALL TURNTABLE

1. Slowly rotate clockwise by hand
   Rotate the turntable 10 times (Figure 1).

2. This step is used to ensure that the belt runs smoothly along the lower edge of the turntable.

3. Place the anti-skid pad on the turntable, ensuring that the anti-skid pad’s logo is facing upwards (Figure 2)

INSTALLING COUNTERWEIGHTS

1. Connect the counterweight to the rear end of the singing arm (Figure 1),
2. Rotate and screw in until you hear a “click” sound (Figure 2).

USING RCA INTERFACE
This record player has 4 built-in speakers and an equalizer.
If you want to use your own amplifier or speakers, please follow the instructions below

Note: For optimal soUJnd, it is recommended to lower the volume of the record player to the lowest level, and then the audio from the record player will be played through your own amplifier, speaker, etc.

1. Set the preamplifier selection switch
   This product has a built-in equalizer function, which allows you to use it even if you don’t have a sound amplifier or connected device. Use the preamplifier selection switch to set the output, as shown below
   Note: The RCA jack is not designed to be directly connected to a power free speaker in line mode. If connected to a passive speaker, there will be no sound,

2. Connecting devices
   Compare the settings of the preamplifier selector switch and connect the RCA audio cable to an input jack compatible with the connected device you are using (amplifier, active speaker, etc.)

The red jack of the RCA audio cable is used for the right (R) channel, and the white jack is used for the left (L) channel.

CONNECTING THE POWER SUPPLY

1. Insert the plug of the power adapter into the power interface on the back of the record player.

Attention: Before turning on the record player, please check all connections to ensure they are correct and safe. Before connecting or disconnecting the power, always turn off the record player.

PLAYA RECORD

1. Before playing the album

2. Remove the stylus protective cover in a parallel direction
   Attention: Applying downward force may cause the needle to fall off the cartridge. If the stylus has fallen off or is about to fall off, please refer.

3. Place the record on a non slip pad with the center hole aligned with the spindle.

4. Operating the record player

5. Connect the included power adapter to the record player, rotate the volume knob, the record player will turn on, and the indicator light will turn red.

6. Remove the protective cover of the stylus.

7. Place the record on a non slip pad.

8. According to the type of record, rotate the control knob to adjust the speed to 33 or 45

9. Press the “Start/Stop” button to start the turntable turning.

10. Open the locking buckle of the singing arm and lift the lifting rod of the singing arm.

11. Place the singing arm in the desired position on the record,

12. Lower the singing arm lifting rod.

BLUETOOTH MODE

1. Connect the power adapter to the record player) and the indicator light will turn red.
2. Rotate the mode knob and adjust to Bluetooth mode. The indicator light will turn blue a111d flash quickly. You will hear the Bluetooth activation sound from the record player.
3.  Turn on the Bluetooth function of the media device, search and select “SYITREN PARON II” connection. After a successful connection, the machine will emit a prompt sound.
4.  When playing music on media devices, the indicator light will remain on.
   Note: The Bluetooth version is 5,2

AUXIN MODE
This record player comes with an AUX input jack for connecting external audio devices such as MP3 players, CD players, and iPods so that you can listen to external signal sources through the speaker of the record player.

1. Use an audio cable with a 3.5mm stereo connection at both ends of the cable (not included),
2. Insert one end into the AUX input jack of the record player, and the other end into the line output jack of the audio device.
3. Power on the record player and audio equipment. The indicator light on the record player is red.
4. The volume can be controlled by the record player, and all functions of the playback device can be operated as usual.
5. Please note that the AUX-IN function is a first priority function. Even if the indicator light of PH ONO/BT is on.
   These functions also do not work when using the AUX-IN function. Please unplug the AUX audio cable before using the PHONO/BT function,

Attention :

1. Ensure that the singing arm is securely locked to avoid any damage.
2.  After playing, don’t forget to turn off the power of the record player and your playback device.

MAINTENANCE

Player body

• When the record player becomes dirty or dusty, first disconnect the power and then wipe off the dust with a soft dry cloth.

• Do not use benzene, diluents, etc.
  When storing this product for a long time, please unplug the power and package it with plastic;

• Do not let it get damp: the drive belt should be removed to prevent uneven stretching.

REPLACING THE STYLUS
It is recommended to replace the stylus after 300 hours of use.

• Remove the stylus
• In addition to the deterioration of sound quality, records may also be damaged due to worn needle tips.
• Please make sure to disconnect the power supply of the product.
• When replacing the stylus, please hold the cartridge and the stylus box tightly.
• Press down on the front end of the stylus and remove it forward

Install a new stylus

1. Install the new replacement stylus onto the cartridge.
2.  Lift the stylus upwards and hear a “click” sound.
3. Ensure that there is no gap between the top cover and the pickup.

REPLACING THE BELT

• Belts are consumables. If the playback speed slows down or there is irregular rotation, please replace the belt.
• Based on experience, we recommend replacing the belt once a year.
• Before replacing the belt, please make sure to disconnect the power supply of the product.

1. Remove the anti-slip pad

2. Remove the belt from the motor

3. Remove the turntable and remove the belt

4.  Install a new belt and ensure that the belt is installed in the middle of the ring

5. Install the turntable
   Align one of the openings on the turntable with the motor.

6. Install the belt onto the motor, grab the belt connected in step 4, pull the belt and place it on the motor.

7. Slowly rotate the plate clockwise ten times by hand, as shown in the following figure

MOVE THE RECORD PLAYER
Use the original packaging material of the product to package the record player in the opposite order to when opened.
If you do not have packaging materials, please take the following measures:

After disconnecting the power, remove the anti slip pad and turntable, and then package them to avoid damage.

• Install the stylus protective cover.
• Use a rope or similar thing to tie the sound to the locking position so that it does not shift.
• Wrap the record player in paper or soft cloth to avoid damage.

TROUBLESHOOTING

SPECIFICATION PARAME

TERS Turntable

Stylus

MAINTENANCE

• Damage caused by improper handling, handling, placement, storage, or installation is not covered by this warranty.
• We suggest carefully reading and fully understanding any instructions provided regarding assembly/installation and service life
• If the product cannot function properly, first check if there are other reasons, such as incorrect power connection.
• Customer service will require a purchase receipt, model description, brand, and explanation of faults and related issues.
• Please contact the merchant you purchased Disposal Disposal of the Product Under no circumstances should you dispose of this product in normal domestic waste.

Disposal

of the Product Under no circumstances should you dispose of this product in normal domestic waste. This product is subject to the provisions of European Directive 2012/19/EUD- ispose of this product via an approved disposal company or your municipal- waste facility. Please observe currently applicable regulations. Please contact your waste disposal center if you need any further information This product’s packaging is made from environmentally friendly materials and can be disposed of at your local recycling plant. Compatible with BLUETOOTH ‘devices. Compatible with iPod, iPhone, and iPad. IPod, iPad, and iPhone are registered trademarks of Apple Inc. in the United States and other countries/regions. BLUETOOTH ‘text mark and micro mark are registered trademarks of Blue- tooth SIG, Inc. Shenyang Saitalin Cultural Communication Co., Ltdwww.syitren.com service@syitren.com Made in China

FCC Statement

This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Portable

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restrictiorn.

Mobile
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>