HOROW HWMT-8733 Small Compact One Piece Toilet Installation Guide
- June 15, 2024
- HOROW
Table of Contents
HOROW HWMT-8733 Small Compact One Piece Toilet
INSTALLATION INSTRUCTION (A101+C2111)
- The profile of installation
Steps
-
Preparation
Pis clean the tank and pipe concerned if it is old one. -
Installation
-
Pls twist the screw and adapter out of threads and take out the washer firstly; Then put the valve into the tank inlet hole and take the triangle washer into the threads ;And then adjust the inlet valve to be right position.
-
Water lever adjustment :Take out the clip and adjust outer float to be right position and into the clip; Twist the adjustable rod to make the rod to make the rod be vertical side.
-
Twist the main body out of the base.
-
Screw the “U” clamp in the end of screw; Slide the body into the tank flush hole and adjust to be right position; And then use the piece of blade to make screw twist tightly; Meanwhile make the seal tightly on the tank hole around.
-
Put the flush valve into the base and take the refilling pipe into the groove.
-
Water lever adjustment: Take out the clip and adjust outer float to be right position and into the clip; Twist the adjustable rod to make the rod to make the rod be vertical side.
-
Adjust the rod relevant to touch the buttons concerned.
Volume adjustment
-
Half
The position of float leads to the flushing volume Min flushing volume in the bottom position of float Max flushing volume in the highest position of float The higher the float, the higher the water lever, the less flushing volume -
The big or smaller of hole as indicated leads to the flushing volume The higher of piece ,the bigger of hole, the less of flushing volume The lower of piece, the smaller of hole, the more of flushing volume
Clear problems
-
The flush valve
-
The fill valve
- Pls give the instruction to the final consumer;
- Pis regard the products as real careless of discrepancy as indicated pictures