HIPPO M13DC Wireless Lavalier Microphone User Manual
- June 13, 2024
- HIPPO
Table of Contents
Wireless Lavalier
Microphone
User Manual
M13DC
Introduction
Thanks for choosing our product. This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions. This product consists of three parts: charging box, microphone transmitting end and receiving end. (as shown in the figure below, some models have no charging box, subject to the real object)
ID Diagram
- Windproof Net
- Microphone indicator
- Microphone Type-c charging port
- Microphone clip
- Key K2
- Switch key K1 ,
- Charging box Type-C charging port
- Charging box indicator
- Type-C or Lightning port to connect phone
- Receiver indicator
- Receiver charging port
How to use
Step 1: Connect the receiver to phone with port. Note: oppo / vivo / iqoo
/ realm brand mobile phones can be used normally only when they go to the
settings (search “OTG” – turn on OTG power supply)
Step 2: Press switch key of microphone, Blue and red lights flash alternately,
and then power is turned on.
Step 3: The indicator red light of receiver keeps always on, then open the
phone camera,live App or other Apps, and then to use the microphone to receive
sound. Special Note: For the use of port: there is no battery in receiver, and
no need to recharge during live. If the phone is low power during Live, it can
be recharged directly through port.
About UI
Microphone Transmitter
| Function | Button | LED |
|---|---|---|
| Power on | Button 35 startup LED1 | Blue and red lights flash alternately |
| Power off | Button 35 startup LED1 | All lights off |
| Unconnected | Blue and red lights flash alternately | |
| Connected | Blue and red lights is normally on | |
| Noise reduction | Click button K2 to turn on and off noise reduction | On/off |
noise reduction: Blue and red lights is normally on
Turn off noise reduction: Blue lights is normally on
Reverberation| Press and hold key K2 to turn reverberation on and off| red
lights flash once
Volume level switch| Click key K1 to cycle the volume level,The volume levels
are: first second and third,The default setting for startup is gear 2| when
switching to the first gear,Blue &Red lights flashes once.when switching to
the second gear,Blue&Red lights flashes twice. when switching to the third
gear, Blue&Red lights flashes three times
Silent mode| Double click key K2 MIC to mute, and then double dick to resume
radio| Blue & Red light flashing
Charging| | The red light is always on
Fully charged| | All lights off
Low battery| | Red lights flashes once every 3s
Receiver (OF Mobile phone)
| Function | Button | LED |
|---|---|---|
| Power on | Automatically power on after plugging in the mobile phone port | The |
light blinks
Connected| | Light is always on
Packing List
Content of packing
- Microphone transmitter
- Lightning receiver
- Charging box
- Charging cable
- User manual
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation
between the equipment and receiver. -Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
MADE IN CHINA
Documents / Resources
|
HIPPO M13DC Wireless Lavalier
Microphone
[pdf] User Manual
2ASJU-M13DC, 2ASJUM13DC, M13DC Wireless Lavalier Microphone, Wireless Lavalier
Microphone, Lavalier Microphone, Microphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>