HIPPO Digital M33 Wireless Microphone User Manual

Wireless Microphone
User Manual

Introduction

Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.
This product consists of three parts: charging box, microphone transmitting end and receiving end.
(as shown in the figure below, some models have no charging box, subject to the real object)

ID Diagram

Transmitting end

1. Windproof Net
2. Microphone display screen
3. Microphone Type-c charging port
4. Microphone clip
5. Power button/mute
6. Noise reduction/reverberation
7. Volume keys/recording
8. Charging box indicator
9. Charging box Type-C charging port

Receiving end

1. Type-C port at the receiving end
2. Receiver power button
3. 3.5mm interface
4. Receiving end clamp
5. Receiver display screen

How to use

Step 1: Connect the receiver to phone with port.
Step 2: Press switch key of microphone, light on, and then power is turned on.
Step 3: The indicator green light of receiver keeps always on, then open the phone camera,live App or other Apps, and then to use the microphone to receive sound. Note: oppo / vivo /iqoo /realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply)

About UI

Microphone Transmitter

Note: TF cards support insertion and removal detection.
TYPE-C port: supports charging/OTG/monitoring

Receiver

TYPE-C port: supports charging/OTG/monitoring

Packing List

Content of packing
(1) Microphone transmitter (2) Lightning receiver (3) Charging box (4) Charging cable (5) User manual (6) 3.5mm audio cable (7) Type-C to Type-C line (8)Type-C to Lightning Line

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

MADE IN CHINA

Documents / Resources

| HIPPO Digital M33 Wireless Microphone [pdf] User Manual
M33, M33 Wireless Microphone, Wireless Microphone, Microphone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>