hippo digital M31 Wireless Microphone User Manual
- June 13, 2024
- hippo digital
Table of Contents
hippo digital M31 Wireless Microphone
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved for uncontrolled environments
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. It should be installed and operated with a minimum
distance of 0cm between the radiator and your body.
Frequently Asked Questions (FAQ)
-
Q: Can I modify the device without approval?
A: No, any changes or modifications not approved by the manufacturer could void your authority to operate the equipment. -
Q: What are the compliance conditions for this device?
A: The device must not cause harmful interference and must accept any received interference as per FCC rules.
Packing List
Package Contents
- Microphone Transmitter x2
- Receiver x2
- Charging Case x1
- Charging Cable x1
- User Manual x1
Note:
This product is a smart wireless microphone that provides professional-grade
recording output. Plu and play, no app required.
Product Overview
- Pickup Microphone
- Windproof net/MIC
- Microphone clip
- The power button of the microphone
- Function button
- Charging pin
- Type-c charging port of microphone
- Indicator light of microphone
- Lightning port to connect the phone
- Type-c port to connect phone
- Receiver charging port
- Indicator light of receiver
- The battery indicator light of the case
- Type-c charging port of case
How to use
Step 1:
Connect the receiver to the phone with the port the indicator light flashes
blue
Step 2:
Press the power button of the microphone the indicator light flashes blue and
redaltemmately means the microphone is turned on
Step 3:
After the receiver is connected to the transmitter, the indicator blue light
of the receiver and the indicator blue and red light of the transmitter are
always on, then open the phone camera, live APP, or other APPs, and then use
the microphone to receive sound.
Special Note:
For the use of port: there is no battery in the receiver, and no need to
recharge during life. If the phone has low power during live, it can be
recharged directly through the receiver’s port.
How to charging
- Charging the case: Use the type-c charging cable (provided) to connect your computer (with power on) or an adapter (not provided) to your charging case. The display flashes single-digit numbers while charging.
- Charging the Microphone Transmitter:
- A. Put the microphone transmitter into the charging case and close the case. The charge case indicator number lights up and the corresponding battery symbol flashes.
- B. Use the type-c charging cable (provided) to connect your computer (with power on) or an adapter (not provided) to your microphone transmitter. The red light is always on and lights off after fully charged.
About UI
Microphone Transmitter
Receiver
Note:
Some Android phone OTG functions need to be opened manually to use, and most
mobile phone OTG functions need not be opened manually by default.
Specification
- Frequency: 2.4Ghz Digital Frequency
- Frequency response: 20Hz-20kHz
- Sampling frequency: 48kHz
- Transmission range: up to 20m(w/o any obstacle)
- Signal-to-noise ratio: ≥75dB
- Sensitivity: -38dB±3dB
- Battery capacity:
- 140mAh(Transmitter)
- 500mAh(Charging case)
- Working duration: up to 7h
- Interface: USB-C
- Weight: 95G
- Dimension: 833261MM
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>