Shenzhen Hippo Digital M16DC Wireless Dual Channel Microphone System User Manual
- June 3, 2024
- Shenzhen Hippo Digital
Table of Contents
Shenzhen Hippo Digital M16DC Wireless Dual Channel Microphone System
Technical specifications
Wireless Dual Channel Microphone System
- Dual channel receiver
- 2x MICs transmitter
- Digital transmission 2.4GHz
- Working distance up to 150M
- 3 levels of db gain:
- Level 1: ~4Qdb
- Level 2: ~sodb
- Level 3: ~7Qdb
- Adjustable gain control
- For use with devices containing an audio input
- Including charging case
Battery life
- MIC transmitter: 10h
- Receiver: 12h
Charging case can charge 3 cycles (for 1 receiver and 2 transmitters) at the same time.
Disposal
Disposal of packaging:
Dispose of the packaging according to its type.
Add cardboard and paperboard to the waste paper, foils and plastic wrapping to
the recyclable waste collection.
Waste electrical and electronic equipment and/or batteries disposed of by
users in private households in the European Union:
This symbol on the product or on its packaging indicates that it cannot be
disposed of with household waste. You must dispose of your old appliance
and/or battery by handing it over to the applicable collection system for the
recycling of electrical and electronic equipment and/or batteries. For more
information on recycling this device and/or battery, contact your local
council, the shop where you purchased the device or your household waste
disposal service. Recycling materials helps to conserve natural resources and
ensures that it is recycled in a way that protects human health and the
environment.
WARNING
Warning regarding batteries:
- Do not disassemble or hit the battery. Be careful not to short-circuit the battery. Do not expose the battery to high temperatures. Do not continue using the battery if it leaks or expands.
- Keep the battery away from children.
- Batteries can explode if exposed to an open fire.
- Never throw batteries into fire.
- Dispose of used batteries according to local regulations.
- Before disposing of the device, remove the battery and dispose of it separately.
FCC
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following
two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Support@easypix.com – www.easypix.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>