hippo digital M10 Smart Wireless Microphone User Manual
- June 12, 2024
- hippo digital
Table of Contents
hippo digital M10 Smart Wireless Microphone
Product Information
The product is equipped with FCCID: 2ASJU-M10, which indicates that it complies with the radiation exposure limits set by the Federal Communications Commission (FCC) for usage in uncontrolled environments. This transmitter should not be placed or used alongside any other antenna or transmitter.
Note 2: It is important to understand that making any changes or modifications to this unit without explicit approval from the responsible party for compliance may result in the user losing their authority to operate the equipment.
Product Usage Instructions
- Ensure that the product is placed in an uncontrolled environment.
- Avoid co-locating or operating the transmitter with any other antenna or transmitter.
- Do not make any changes or modifications to the unit without prior approval from the responsible party for compliance.
- Follow all other guidelines and instructions provided in the user manual for optimal usage and safety.
Introduction
Thanks for choosing aur product.This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online livebroadcast, video Vlog shooting, program interview, recording, video teaching and other occasions. The wireless Microphane consists of two parts, one is Microphane transmitter , the other one is receiver. (See as below picture)
ID Diagram
- Windproof net
- Microphone inditator
- Microphone charging port
- Microphone clip
- Switch key
- port to connect phone
- Receiver indicator
- port of receiver
The function of above O will be specifically explained later. Some Android phones may have incompatibility problems due to system , please consult your dealer fo details
How to use
Step 1: Connect the receiver to the phone with port.
Note : oppo / vivo / iqoo / realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply)
Step 2: Press the switch key of the microphone, the indicator light turns green, and then power is turned on.
Step 3: The indicator light of receiver keeps always on, then open the phone camera, ive App or other Apps , and then to use the microphone to receive sound.
Special Note:
For the use of O port : there is no battery in receiver , and no need to
recharge during live. If the phone is low power during Live, it can be
recharged directly through O port.
About Ul
Microphone Transmitter
Receiver
REVERB MODE :
Press the START BUTTON 3 times continuously to enter reverb mode
Product support and listening function
This product comes with A1 noise reduction, which wi enter the noise reduction
mode when it is started
Packing List
Content of packing
- Microphone transmitter
- receiver
- charging cable
- User manual
FCCID : 2AS.JU-MIO
RF exposure statement
This equipment complies with the FCC radiation exEN1sure limits set forth for
an uncontrolled environment. This transmitter must not be Oocated or operating
in conjunction with any other antenna or transmitter.
FCC Warning
This device complies with Part 15 of the FCC Rules. OE
Rration is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired 0ERration.
NOTE 1 : This equipment has Iren tested and found to comply with the limits a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are &signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in with the instructions, may harmful interference to radio communications. However, there is no guarantee that interference will not in a particular installation. If this equipment does cause harmful interference to radio television which can be determined by turning the equipment off and on, the user is encouraged to tty to correct the interferenæ by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation Between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio,’TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>