hippo digital M6 Wireless Microphone with Charging Case User Manual
- June 12, 2024
- hippo digital
Table of Contents
M6 WIRELESS MICROPHONE
USER MANUAL
Packing List
Package Contents:
- Microphone Transmitter x2
- Receiver x1
- Charging Case x1
- Charging Cable X1
- User Manual X1
Note:
This product is a smart wireless microphone that provides professional-
grade recording output. Plug and play, no app required.
Product Overview
1. Microphone clip
2. Indicator light of microphone
3. Type-c charging port of microphone
4. Windproof net /MIC
5. Power button of microphone
6. Charging pin| 7. Lightning port to connect phone
8. Indicator light of receiver
9. Receiver charging port
10.Type-c charging port of case
11. Indicator light of case
---|---
How to use
Step1: Connect the receiver to phone with port.
Step2: Press power button of microphone 3s, the indicator light turns green, and then microphone is turned on.
Step3: The indicator red light of receiver keeps always on, then open the phone camera, live APP or other APPs, and then to use the microphone to receive sound.
Special Note:
For the use of port: there is no battery in receiver, and no need to
recharge during live. If the phone is low power during live, it can be
recharged directly through the receiver’ s port.
How to charging
-
Charging the case: Use the type-c charging cable (provided) to connect your computer (with power on) or an adapter (not provided) to your charging case. The display flashes single-digit numbers while charging.
-
Charging the Microphone Transmitter:
A. Put the microphone transmitter into the charging case and close the case. The charge case indicator number lights up and the corresponding battery symbol flashes.
B. Use the type-c charging cable (provided) to connect your computer (with power on) or an adapter (not provided) to your microphone transmitter. The red light is always on and light off after fully charged.
About UI
Microphone Transmitter
| Function | Button | LED |
|---|---|---|
| Power on (Unconnected) | Long Press 3S | Blinking alternately red and green |
| Power off | Long Press 3S | All the lights go out |
| Connected | Green light always on | |
| Noise reduction | Automatically on | Green always ligoht on |
| Reverberation | Press three times to turn on or off | Red light blinks once then |
the green light
is always on
Turn on silent mode| Press twice| Green light is blinks
Turn off silent mode| Press twice| Green light always on
Charging| | Red light is always on
Fully charged| | Light is off
Low battery| | Red light blinks every 1 Os
Receiver
| Function | LED |
|---|
Power on (Not paired with the
microphone transmitter)| Automatically power on after plugging in
the mobile phone port| Red light blinks
Power off| Automatic shut down after unplugging| Lights is off
Paired with the microphone
transmitter| | Red light is always on
Specification
Model: M6
Capacity: 500mAh,1.85Wh/3.7V
Input: SV 1A
Output: 5V 0.3A
Q&A
Q: What should | do if there is no sound in the recorded video?
A: Please confirm below 4 situations:
1. Confirm whether the connection is successful: The indicator lights of the
microphone and receiver are always on, which means the connection is
successful. Only when the connection is successful can the recording sound be
started.
2. This microphone supports Mute on and Mute off, make sure the green
indicator light of microphone stays on when recording.
3. You need to unplug the receiver from the phone to hear the sound after
recording is done.
4. Confirm whether the phone volume is not at 0, and adjust properly.
Q: Do the microphone need to be charged?
A: Microphone need to be charged with included Type-C charging cable or or put
in the charging case when it’s running out of power. You may see red light
blinks every 10s on the microphone.
Q: Can it be used as a amplifier?
A: It is a microphone to pick up sound only, not a loudspeaker
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur unparticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.