HIPPO KS01 Portable Wireless Speaker Karaoke Wireless Microphone Instruction Manual

Portable Wireless Speaker
Karaoke Wireless Microphone
instruction manual
KS01

Instruction Manual

KS01 Portable Wireless Speaker Karaoke Wireless Microphone

Thank you for choosing to purchase this karaoke microphone, which uses industry advanced technology. With strong compatibility you can easily enjoy mobile song practice and KTV anytime and any where only connect with the audio playback device. Wish you a pleasant use!

Function

This karaoke microphone speaker set adopts advanced 1-wire communication technology, mobile phone karaoke Bluetooth connection, wireless accompaniment, and is fully compatible with current mainstream mobile phones. Whether you are a karaoke fan or an Android K fan, you can enjoy the pleasure of karaoke with energy conservation and ease.

Instructions for microphone functions

Function

Support Bluetooth connection to play music / support TF card to play music/karaoke sound reinforcement function / built-in reverberation sound effect function / headphone output function.

Accessories

Accessories

Speaker
Type-c cable| Microphone Manual
---|---

Precautions for using speaker microphone

Power on/off
When no insert TF card, long press the Power on/off button to turn on the product, default in Bluetooth mode, voice prompt “Bluetooth mode”. Long press Power on/off button to turn off.

Bluetooth Connection
Open the mobile phone’s Bluetooth Settings and search the device name “KS01”, and then pairing, after connection successfully there will be a prompt “Bluetooth connected” and LED light always on.

Mobile phone playback
After the Bluetooth connection successfully, open the mobile phone music player and download your favorite songs or accompaniment to play, also can adjust the volume in the mobile phone.

Tf card playback
Insert the TF card into the device and the machine will automatically play the music from the TF card.

Volume Adjustment
The microphone and accompaniment volume can be adjusted through the buttons on the device control panel.

Charging
Use the standard charging cable to connect to the charger for charging.
When charging, the red light is always on, and will be goes off when it is full.

Attention

1. Please disconnect the charger and turn it off before cleaning the machine.
2. Non professionals are not allowed to disassemble the equipment by them selves to avoid machine failure and loss of warranty rights.
3. Please do not place the equipment in the direct sunlight to avoid premature aging of electronic parts.
4. Avoid using in places with flying dust or dirty environment ( dust is easy to cause equipment failure
5. Do not place the equipment in an excessively cold or overheated environment , which may cause the equipment to fail to operate normally.
6. It is recommended that the ambient temperature of the equipment used should not exceed-10°C-40°C , Which is relatively moderate 10%-95%,.
7. Please do not put any objects into the equipment to avoid short circuit or circuit damage . Please do not spill any liquid on the product.
8. Avoid friction and collision between the machine and hard objects to avoid scratching , falling off or other hardware damage.
9. The product shall not be exposed to the sun, fire or similar overheating environment.
10. It is forbidden to disassemble , impact , squeeze or put the product into fire. If the battery has serious failure , Do not continue to use.
11. This manual contains important information , please reserve it.

Bluetooth

1. Long press the Speaker power on button to turn on the device, and the voice prompt “Bluetooth mode’, indicator lights flashing at the same time. The blue lights will always on after connection successful.
2. Open the mobile phone’s Bluetooth Settings and search the device name”KSO1″, and then pairing, after connection successfully there will be a prompt voice.
3. The microphone will automatically pairing with speaker after it turn on, the blue lights will flash quickly when not paired and will always on after paired.

Note: the equipment is connected to the phone once time, Bluetooth has the memory function, connect automatically after turn on, if you want to disconnect, can be set up by mobile phone to disconnect Bluetooth. If you only listen to music, the microphone volume can be transferred to the minimum.

Handheld Karaoke Speaker Features

Intelligent anti-howling-
Immersion singing without howling within 10cm
High sensitivity of sound collection-360° sound collection from 5-10cm with loud and good sound quality
Low-latency-
40ms low latency
Al functions-
5 sound effect, change the sound with one button Flexible adjust the accompaniment, reverberation, and microphone volume
Note : Product is subject to change without prior notice.

Speaker

Bluetooth version : 5.3
Speaker diameter: 57mm
Power: 5W
Working voltage: 3.7V
Frequency: 20Hz-20kHz
Reverberation: echo sound effect
Power adapter: DC5V≤1A (can be charged with mobile phone charger)
Charging time: 3.5-4hours

Microphone

Microphone: back-pole microphone
Working voltage: 3.7V
Frequency: 20Hz-20kHz
Power adapter: DC5V<s1A (can be charged with mobile phone charger)
Charging time: about 2.5hours

Product information

Product name: mini karaoke speaker set
Product model: KS01
Note : Product is subject to change without prior notice.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement
• The device can be used in portable exposure condition without restriction

FCC ID: 2ASJU-KS01

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>