soundsation U16H Compact Wireless System User Manual

soundsation U16H Compact Wireless System

Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our mission is to satisfy all possible needs of musical instrument, professional audio and lighting users offering a wide range of products using the latest technologies.
We hope you will be satisfied with this item and, if you want to collaborate, we are looking for a feedback from you about the operation of the product and possible im-provements to introduce in the next future. Go to our website www.soundsationmusic. com and send an e-mail with your opinion, this will help us to build instruments ever closer to customer’s real requirements.
One last thing: read this manual before using the instrument, an incorrect operation can cause damages to you and to the unit. Take care!

IMPORTANT SAFETY SYMBOLS

• The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating con-ditions, which may be sufficient to constitute the risk of electric shock or death.
• The symbol is used in the service documentation to indicate that spe-cific component shall be replaced only by the component specified in that documentation for safety reasons.
• Protective grounding terminal
• Alternating current/voltage
• Hazardous live terminal
• Denotes the apparatus is turned on
• Denotes the apparatus is turned off
• Describes precautions that should be observed to prevent the danger of injury or death to the operator.
• CAUTION: Describes precautions that should be observed to prevent danger of the apparatus.

TAKING CARE OF YOUR PRODUCT

• Read these instructions
• Keep these instructions
• Heed all warning
• Follow all instructions

Water / Moisture

The apparatus should be protected from moisture and rain and can not be used near water; for example near a bathtub, a kitchen sink, a swimming pool, etc.

Heat
The apparatus should be located away from heat sources such as radiators, stoves or other appliances that produce heat.

Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for safety.

Power Supply
The apparatus should be connected to the power supply only of the type as marked on the apparatus or described in the manual. Failure to do could result in damage to the product and possibly the user. Unplug this apparatus during lightning storms or when unused for long periods of time.

Electrical Connection
Improper electrical wiring may invalidate the product warranty.

Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.

Servicing
Do not implement any servicing other than those means described in the manual. Refer all servicing to qualified service personnel only. Only use accessories/attachments or parts recommended by the manufacturer.

Warning
Please remember the high sound pressure do not only temporarily damage your sense of hearing, but can also cause permanent damage. Be careful to select a suitable vol-ume.

Interference from cell phone
Using a cell phone near the wireless system can induce noise. If this occurs, move the cell phone further away from the components of the wireless system.

UNPACKING

PocketMic U16 wireless system is composed by the following parts:

Pocketmic u16h

• 1x Single UHF Wireless Receiver
• 1x Handheld Microphone Transmitter with Professional Cardioid Capsule
• 2x 1.5V AA-Type Batteries (not rechargeable)
• 1x Recharge USB-A to USB-C cable
• Padded carrying case
• This User Manual

pocketmic u16hh

• f 1x Dual UHF Wireless Receiver
• f 2x Handheld Microphone Transmitters with Professional Cardioid Capsule
• f 4x 1.5V AA-Type Batteries (not rechargeable)
• f 1x Recharge USB-A to USB-C cable
• f Padded carrying case
• f This User Manual
  ATTENTION : Packaging bag is not a toy! Keep out of reach of children! Keep in a safe place the original packaging material for future use.

ACCESSORIES

SOUNDSATION can supply a wide range of quality accessories that you can use with your WIRE-FREE Series wireless microphone system, like Cables, Mixers, Speakers, Am-plifiers, Stands, etc.
All products in our catalogue has been long tested with this device so we recommend to use Genuine SOUNDSATION Accessories and Spare Parts.
Ask your SOUNDSATION dealer for any accessories you could need to ensure best performance of the product.

OVERVIEW

There are so many applications where a wireless microphone, while keeping profession-al audio quality, is required to be as portable and easy to use as possible. It happens very often that even the most experienced and demanding users struggle when they have to solve interference problems during their performances. Nowadays, moreover, the increasing number of smartphones and other devices, Wi-Fi, digital TV, etc., make the frequency spectrum more and more critical. Soundsation is well aware of this state of affairs and knows very well the needs of its users, which is why it decided to use digital technology also in the automatic selection of frequencies (16 channels in the case of the PockeMic U16) by choosing the least dis-turbed ones, but also in the automatic synchronization between transmitter and receiv-er. All with the greatest possible simplicity: just turn them on and after a few fractions of a second the game is done; you just need to make sure the batteries are charged. The receiver allows direct charging of the lithium battery thanks to the supplied USB cable. PocketMic U16 systems are available in 4 configurations:

pocketmic u16h-a1

• 1x Single UHF Wireless Receiver
•  1x Handheld Microphone Transmitter with Professional Cardioid Capsule
• Carrier Frequency: 521,4-549,6 MHz

pocketmic u16hh-a1

• 1x Dual UHF Wireless Receiver
• 2x Handheld Microphone Transmitters with Professional Cardioid Capsule
• Carrier Frequency: 521,4-549,6 MHz

pocketmic u16H-a2

• 1x Single UHF Wireless Receiver
• 1x Handheld Microphone Transmitter with Professional Cardioid Capsule
• Carrier Frequency: 606-613,5 MHz

pocketmic u16HH-A2

• 1x Dual UHF Wireless Receiver
• 2x Handheld Microphone Transmitters with Professional Cardioid Capsule
• Carrier Frequency: 606-613,5 MHz

MAIN FEATURES

• Compact yet professional UHF system
• Ultra-simple installation and operation
• (2×16) 16 channels automatically matched at power on
• Receiver with rechargeable lithium battery
• Handheld microphone(s) with display and professional cardioid capsule
• Battery level indication
• Padded carrying case included

PRODUCT APPEARANCE

Sizes

Handheld Microphone

PocketMic U16 systems feature handheld transmitters with professional dynamic cardi-oid capsule.

1. Capsule-cover Grille: It protects microphone capsule. Never remove it to prevent damage to the internal parts of the microphone.

2. LED Display: This LED display shows the current frequency, channel currently in use, the signal strength and battery status.
   NOTE: In case of low battery, the battery icon will flash. In that case, please be ready to replace the alkaline batteries as soon as possible.

3. Power button: Short press to switch the microphone on and longer press to switch it off. (Short press to mute when the power is on – press and hold for 10 seconds to switch channel, CHA to CHB or vice versa, when the power is off).

4. IR Sync button: During IR Sync, bring this part of the transmitter close to the receiver to complete the operation.

5. CH+ / CH- buttons: Press these buttons to change the frequency.

6. Battery Slot: Insert two 1.5V AA-Type alkaline batteries, paying attention to cor-rect polarity (indicated on bottom of this battery compartment).

Handheld Microphone Using Technique

• Don’t hold the microphone grill.
• Avoid holding the microphone on antenna position, or two microphones together.
• Avoid direct the microphone toward a speaker to avoid Larsen effect, which could damage your audio system.

Transmitter LED Display

1. Indicates battery status, It blinks when battery is low
2. Indicates the current frequency
3. Indicates the channel currently in use (CHA or CHB)
4. Indicates the signal strength

Wireless Receiver

1. 6.35mm 1/4” Jack audio connector: direct connection to mixer, sound system, or any equipment with a 6.35mm 1/4” MIC input without use of any additional cable.
2. RF-A/B LED Light: RF light(s) flashes in red when the receiver is charging and stops flashing after it is fully charged. Lights up in green when the receiver is paired with the handheld transmitter(s).
3. Power Button: Press and hold for 3 seconds to turn on or off.
4. Signal-receiving Antenna(s): Receives audio signal from the handheld transmit-ter(s).
5. DC 5V Charging Socket: Connect the included USB Type-C cable to charge the receiver.

OPERATION

Receiver Connection
Connection of the PocketMic U16 receiver is easy and does not require any cables.
Connect the 6.35mm 1/4” jack of the receiver to any 6.35mm 1/4” MIC input on your mixer or sound system without switching it on yet. The receiver is now ready to be paired with the transmitter(s), as described in the “6.2. IR Sync Operation” on page 11.

NOTE: After pairing for the first time, receiver and transmitter(s) should pair automatically. If not, repeat the operation in the section below to pair again.

IR Sync Operation

1. Switch the handheld microphone(s) on, unscrew the lower part of the handheld microphone and press the IR Sync button (point 4 on section “5.2. Handheld Microphone” on page 8) for 6 seconds. The “…” icon will appear, indicating that the transmitter is in sync mode.
2. Then, when the receiver is off, press and hold the Power button (point 3 on section “5.5. Wireless Receiver” on page 10) for 5 seconds, and the RF LED light (2) will start flashing alternatively in green/red, indicating that the receiver is ready for sync.
3. Keep the transmitter(s) close to the receiver. When the RF LED light(s) (2) of the receiver stops flashing and turns to green, it means that the sync operation is com-pleted and the frequency matching is succesful. Press the IR Sync button (point 4 on “5.2.
4. Handheld Microphone” on page 8) on the transmitter to exit Sync mode.

Frequency Adjustment

Click Frequency Adjustment Buttons (CH+/CH-) (point 5 on section “5.2. Handheld Microphone” on page 8) on the transmitter to change frequency. Use different frequencies when using 2 or more microphones at the same time. When the frequency is being adjusted, the RF LED light(s) turns red, then turns to green when the frequency is matched.

BATTERY DISPOSAL INSTRUCTIONS

In case of use of rechargeable batteries for the handheld microphone, please follow the instructions below for safe handling of and proper disposal of user-serviceable batter-ies.

• Always store the batteries with full charge. Partially charged batteries will lose capacity. Never store the battery when fully drained. Always recharge immediately when empty.
• Battery runtime will decrease time by time, and it may be slightly shorter than predicted due to different working environments.
• Please make sure the battery will be disposed properly according to your local law when it runs out of its life, so that to protect the environment. Some batteries may be recycled, and may be accepted for disposal at your local recycling center.
• Please contact SOUNDSATION Customer Support if you have questions about proper handling of batteries. Batteries may present a risk of fire, explosion, or chemical burn if mistreated.
• Do not disassemble, puncture, modify, drop, throw, or cause other unnecessary shocks to batteries.
• Do not dispose of batteries in a fire or trash incinerator, or leave batteries in hot places such as a automobile under direct sunlight.
• Do not store batteries near an oven, stove, or other heat source.
• Do not connect batteries directly to an electrical source, such as a building outlet or automobile power-point.
• Do not place batteries into a microwave oven, or into any other high-pressure con-tainer.
• Do not immerse batteries in water or otherwise get them wet.
• Do not short circuit batteries; for example, do not carry loose batteries in a pocket or purse with other metal objects, which may inadvertently cause a battery to short circuit.
• Do not use batteries, or charge rechargeable batteries, that appear to be leaking, discolored, rusty, deformed; emit an odor; or are otherwise abnormal.
• Do not touch leaking batteries directly; wear protective material to remove the bat-teries and dispose of them properly immediately.
• Do not reverse the polarity (positive and negative terminals) of batteries.
• Do not continue to charge batteries beyond the specified time.
• Do not give batteries to young children, or store batteries where children may access them.
• Do not put batteries in mouth. If swallowed, contact physician or local poison control center immediately.

SPECIFICATIONS

SYSTEM U16H-A1       U16HH-A1       U16H-A2       U16HH-A2

Carrier Frequency| 521.4-549.6

MHz

| 521.4-549.6

MHz

| 606-613.5

MHz

| 606-613.5

MHz

RECEIVER
Modulation Type| DQPSK
Dynamic Range| >90dB
Signal/Noise Ratio| >80dB
Total Harmonic Distortion| <0.3%
Electric Current| 250mA ± 10mA
Voltage| 3.7V Lithium battery
Frequency Response| 40Hz-20kHz ± 3dB
Audio output Level| 400mV ± 20mV
Ideal Distance| 50m
TRANSMITTER
Pick up Type| Professional Dynamic Capsule
Pattern| Cardioid
Harmonic Suppression| 54dBc
---|---
Harmonic Distortion| <0.3%
Electric Current| 130mA ± 10mA
Voltage| 2x 1.5V AA Battery
Receiver Size (WxDxH)| 52 x 22 x 227 mm ( 2.05 x 0.87 x 8.94” in)
Microphone Size (ØxH)| 51,5 x 239 mm (2.03 x 9.41” in)
Net Product Weight (Receiver+Mic)| 0.35kg (0.77

lbs.)

| 0.6kg (1.32

lbs.)

| 0.35kg (0.77

lbs.)

| 0.6kg (1.32

lbs.)

Package Size (WxDxH)| 305 x 168 x 80 mm (12 x 6.61 x3.15” in)
Package Weight| 0.8kg (1.76

lbs.)

| 1.1kg (2.42

lbs.)

| 0.8kg (1.76

lbs.)

| 1.1kg (2.42

lbs.)

FREQUENCY TABLE

Frequency **521.4-549.6 MHz                             606-613.5 MHz**

Range

Channel CH-A                     CH-B                     CH-A CH-B

01| 522.40| 537.60| 606.00| 609.90
02| 523.20| 538.40| 606.30| 610.20
03| 524.00| 539.20| 606.60| 610.50
04| 524.80| 540.00| 606.90| 610.80
05| 525.60| 540.80| 607.20| 611.10
06| 526.40| 541.60| 607.50| 611.40
07| 527.20| 542.40| 607.80| 611.70
08| 528.00| 543.20| 608.10| 612.00
09| 528.80| 544.00| 608.40| 612.30
10| 529.60| 544.80| 608.70| 612.60
11| 530.40| 545.60| 609.00| 612.90
12| 531.20| 546.40| 609.30| 613.20
13| 532.00| 547.20| 609.60| 613.50
14| 532.80| 548.00| |
15| 533.60| 548.80| |
16| 534.40| 549.60| |

WARRANTY AND SERVICE

All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt.

The following cases/components are not covered from the above warranty:

• Any accessories supplied with the product
• Improper use
• Fault due to wear and tear
• Any modification of the product effected by the user or a third party

SOUNDSATION shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at SOUNDSATION’s discretion either by repair or by exchanging individual parts or the entire appliance. Any defective parts removed from a product during the course of a warranty claim shall become the property of SOUNDSATION.

While under warranty period, defective products may be returned to your local SOUNDSATION dealer together with original proof of purchase. To avoid any damages in transit, please use the original packaging if available. Alternatively you can send the product to SOUNDSATION SERVICE CENTER – Via Enzo Ferrari , 10 – 62017 Porto Recanati – Italy . In order to send a product to service center you need an RMA number. Shipping charges have to be covered by the owner of the product.
For further information please visit www.soundsationmusic.com

WARNING

PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only

• This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2202/96/EC) and your national law.
• This product should be handed over to a designated collection point, e.g., on an authorized onefor- one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (WEEE).
• Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources.
• For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service.

This product is imported in EU by
Questo prodotto viene importato nella UE da
FRENEXPORT SPA – Via Enzo Ferrari, 10 – 62017 Porto Recanati – Italy
www.soundsationmusic.com
Soundsation® is a registered trademark of FRENEXPORT SPA – Italy
Soundsation® è un marchio di fabbrica registrato della FRENEXPORT SPA – Italy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>