eta 9320 Fenité Exclusive Hair Dryer User Manual
- June 13, 2024
- ETA
Table of Contents
9320 Fenité Exclusive Hair Dryer
Product Information
- Product Name: Hair Dryer
- Model Number: eta 932090010 Exclusive
- Manufacturer: Unknown
- Country of Origin: Czech Republic (CZ)
- Weight: Approximately 0.6 kg
- Dimensions: Approximately 100 mm (D) x 73 mm (H) x 240 mm (V)
- Power Input: Not specified
- Protection Class: II
- Noise Level: 85 dB(A) re 1pW
Instructions for Use:
- Remove all packaging materials and accessories from the hair dryer.
- Plug the power cord (A7) into a socket.
- Attach the desired accessory (B) onto the hair dryer by sliding it onto the device. The magnet ensures a secure fit.
- Turn on the hair dryer by moving the switch button (A4) to the position I.
- Select the desired temperature, air flow, and mode parameters using the control panel icons:
- A1 Speed: Choose between low, medium, or maximum air flow intensity.
- A2 Heat: Choose between low, medium, or maximum air temperature. “Warm air” option is also available.
- A3 Mode: Choose between cool air, alternation of warm and cold air, or “SOFT” mode with low speed and temperature.
- Hair Drying:
- For quick hair drying, select the maximum level of speed and temperature.
- For drying short hair or finishing hair drying, set the switches to lower positions.
- After finishing drying, turn the A4 switch to the O position.
- Hair Styling:
- Using diffuser B2, you can add volume to your hair and create natural waves.
- Set medium temperature and medium air flow intensity.
Maintenance
- Before performing any maintenance, allow the hair dryer to cool down.
- Wipe the surface of the dryer with a wet soft cloth. Do not use rough or aggressive detergents.
- Mechanical cleaning is the only required maintenance.
- To clean the grid and filter (A6), grasp the grid and turn it slightly in the direction of the arrow. Remove any impurities from the grid and filter using a brush. After cleaning, put the grid back in place by reversing the movement. Ensure that the filter is not damaged.
Ecology
No specific information provided.
Technical Data
- Voltage and Input specifications are stated on the type label.
- The hair dryer is classified as Protection Class II.
- The hair dryer weighs approximately 0.6 kg.
- The dimensions of the product are approximately 100 mm (D) x 73 mm (H) x 240 mm (V). – The input in off mode is 0 W. – The acoustic noise level is 85 dB(A) re 1pW. Please note that additional information may be available in the complete user manual.
SAFETY PRECAUTIONS
- Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
- This appliance may only be used by children aged 8 years or older, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children younger than 8 years must be kept out of reach of the appliance and its power cord.
- Before replacing accessories or accessible parts, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
- If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.
- The appliance must not be immersed into water or other liquids and it must not be used close to bathtubs, showers, wash basins or other water containers, including a swimming pool. If the straightener still falls into water, do not take it out! First of all unplug the power cord from the socket and only then take out the hair straightener. In this case take the appliance to a special service to check its safety and proper function.
- For additional protection we recommend installation of current protection (RCD) with the nominal release current not exceeding 30 mA. Ask a control technician or an electrician for advice.
- If the appliance is used in a bathroom, it has to be disconnected from the electric power by unpluging the power cord from the socket because there is risk close to water even if the appliance is off.
- Never use the appliance if the power cord or power plug are damaged, if it is not functioning correctly or if it has fallen on the floor and been damaged or if it has fallen into water. In such cases take the appliance to a professional service centre to verify its safety and correct function.
- Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.
- CAUTION – Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
- The appliance is intended for use in households only and for similar use! It is not designed for use in hair salons or for similar commercial use!
- Do not plug the power cord in the electrical socket and do not unplug it with wet hands or by pulling the power cord!
- Please keep the distance of more than 10 cm between hair and inlet,avoiding hair from entangling into the hair dryer. Please keep the distance of more than 3 cm between hair and outlet to avoid scald.
- Switch off the appliance right after its use, unplug it from power supply and let it cool down. Then put it on a safe dry place, out of reach of children.
- Do not leave the appliance in operation unattended!
- The appliance must not be used in a damp or wet environment and in any environment with the danger of fire or explosion (premises where chemicals, fuels, oils, gases, paints and other flammable or volatile materials are stored).
- Be very careful when handling the adapters during drying (can be hot).
- Holes for air ventilation must not be covered. Also, do not put the appliance in the “on” position on soft surfaces (e. g. bed, towels, sheets, carpet), the duct could get covered. Penetration of dust, hair, threads, etc. to the duct has to be prevented.
- When the appliance is overheated, the automatic heat fuse is activated and it disconnects power supply. If it happens, switch off the appliance and unplug it from the socket. Remove possible visible obstacles preventing air flow and let the appliance cool down.
- The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges.
- Only use this appliance for the purpose it was designed for, as specified in this manual. Never use the appliance for any other purpose.
- The producer does not guarantee any loss caused by improper handling of the appliance and its accessories (e. g. electrical accident, fire, burn, hair damage) and its guarantee for the appliance does not apply in the case of non–compliance with the safety instructions above.
DESCRIPTION OF THE APPLIANCE
-
A – hair dryer
-
A1 – air flow intensity regulator (Speed)
-
A2 – air temperature regulator (Heat)
-
A3 – mode switch button (Mode) (using this button you can set the mode of air flow as follows:
-
A4 – switch ON/OFF (I – on / O – off)
-
A5 – handle
-
A6 – removable suction grid
-
A7 – power cord
-
A8 – control panel
-
A9 – air temperature/intensity setting indication
-
A10 – air output
-
A11 – ioniser
-
A12 – active ionization / nano humidification icons
-
-
B – adapters
- B1 a – concentrator QUICK Dry (concentrated ray of air flow helps your hair dry more quickly)
- b – air dispersion controller (towards „+“ = more dispersion; towards „-“ = more concentrated air beam)
- B2 – diffuser (used for hair styling; close contact with scalp has to be avoided; otherwise hair can get overdried)
-
C – travel pouch
INSTRUCTIONS FOR USE
Remove all packing material and take out the dryer with its accessories. Plug the power cord A7 to a socket. Simply slide the selected attachment B onto the hair dryer (the magnet ensures a more secure fit of the attachment). Switch the appliance on moving the switch button A4 to the position I and select the required temperature, air flow and mode parameters.
Meaning of control panel icons
Setting options for each mode
Hair drying
For quick hair drying select the maximum level of speed and temperature. For
drying short hair or for finishing hair drying, set the switches to the lower
positions. After you have finished drying turn the A4 switch to the O
position.
Hair styling
Using diffuser B2 you will add volume to your hair and you will create natural
waves. Set medium temperature and medium air flow intensity.
MAINTENANCE
Allow the appliance to cool down before any maintenance! Wipe the dryer surface with a wet soft cloth. Do not use rough and aggressive detergents! Maintenance only includes mechanical cleaning.
Grid and filter cleaning (A6)
Grasp the grid and turn it slightly in the direction of the arrow (Fig. 1).
You can now remove it. Remove possible impurities from the grid and the filter
underneath (e. g. using a brush). After cleaning, put the grid back by the
opposite movement. Make sure that the filter is not damaged!
ECOLOGY
If the size of the appliance allows, all the parts contain marking of the materials used for production packaging, components and accessories as well as for recycling. The symbols on the product or in the accompanying documentation mean that the electrical or electronic product used must not be liquidated together with communal waste. To ensure the appropriate liquidation take the used appliance to a collection point where it will be accepted free of charge. Correct liquidation of the product helps to protect valuable natural resources and helps to prevent a potential negative impact on the environment and human health which can be the outcome of inappropriate liquidation of waste. More details can be obtained from your local authorities or the closest collection point. Inappropriate manipulation of such waste can result in a fine according to the national legislation.
TECHNICAL DATA
- Voltage (V) / Input (W) spec. on the type label
- Protection class of the appliance II.
- Weight (kg) approx. 0.6
- Size of the product (mm) 100 x 73 x 240
- Input in off mode is 0 W
- Acoustic noise level of 85 dB(A) re 1pW
MAINTAINANCE
- Maintenance of a serious nature or maintenance which requires interference with the internal parts of the appliance must be carried out by a professional service centre! By failing to follow the instructions issued by the manufacturer, the right to the warranty service will be invalidated!
- The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS MANUAL:
HOUSEHOLD USE ONLY. DO NOT IMMERSE
IN WATER. TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM
BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR
PLAYPENS. THIS BAG IS NOT A TOY.
NOTICE
Do not use the appliance close to bath tubs, showers, bash basins or other
water containers.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>