jura 5496 ENA 8 Automatic Coffee Machine Instructions

jura 5496 ENA 8 Automatic Coffee Machine

Product Information

The ENA 8 (NAC) is a coffee machine designed for home use. It is equipped with various control elements and settings to provide a convenient coffee-making experience. The machine features a water tank for easy filling and requires regular maintenance actions to ensure optimum performance. It also has a display that provides messages and troubleshooting information. The ENA 8 (NAC) is designed with safety in mind and comes with important safeguards to prevent injuries and damage to property.

Product Usage Instructions

Switching the Machine On and Off

1. Ensure the machine is plugged into a power outlet.
2. To switch the machine on, press the power button or follow the specific instructions provided with your machine.
3. To switch the machine off, press the power button again or follow the specific instructions provided with your machine.

Filling the Water Tank

1. Locate the water tank on your machine.
2. Remove the tank from the machine by following the instructions provided.
3. Fill the tank with clean drinking water up to the indicated level.
4. Securely place the filled water tank back into the machine according to the instructions provided.

Maintenance Actions

1. Regularly clean the exterior of the machine using a damp cloth and mild detergent. Do not immerse the machine in water or any other liquid.
2. Follow the specific maintenance instructions provided with your machine for descaling, cleaning internal parts, and replacing filters or other components.
3. If the machine malfunctions or has a damaged cord or plug, immediately unplug it from the power outlet and contact the nearest authorized service facility for examination, repair, or adjustment.

Note: Always refer to the detailed instructions provided with your specific ENA 8 (NAC) machine for accurate usage information and safety precautions.

IMPORTANT SAFEGUARDS

Comply with the instructions for use

Failure to observe the instructions for use may result in serious injuries or damage to property. Safety information is therefore indicated as follows:

• This is the safety alert symbol. lt is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
• DANGER: indicates a hazardous situation which, if not avoided, will result in death or serious injury.
• WARNING: indicates a hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION: CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE: NOTICE is used to address practices not related to personal injury.

Follow the basic safety precautions

When using electrical appliances, basic safety precautions shall always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electric shock and injury to persons, do not immerse power cord, plugs, or body of machine in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
• The use of an accessory attachment not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• To disconnect, turn any control to ‘OFF’ then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Use extreme caution when dispensing hot steam, hot water or hot coffee.

SAVE THESE INSTRUCTIONS
Pass them on to any subsequent user.

Intended use

The appliance is designed and intended for household use only. It shall only be used for coffee preparation and to heat milk and water, according to these instructions. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use.

People, including children, who

• do not have the physical, sensory or mental capabilities to use the appliance safely or
• are inexperienced or lack knowledge in how to use the appliance safely

must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.

Special power cord set instructions

• A short power-supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
• The cord shall be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
• This appliance has a 3-pin grounded plug.
• Do not modify the plug in any way.

Extension cords are available an may be used if care is exercised in their use. If the user chooses to use an extension cord,

• the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and
• if the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord, and
• the longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over.

WARNING

• To reduce the risk of fire or electric shock, DO NOT remove any service covers. DO NOT modify the appliance in any way that is not described in these instructions. NO user serviceable parts included.
• Repair MUST be done by authorized personnel only.
• In the event of signs of damage, for example if there is a smell of burning, unplug the machine immediately from outlet and contact JURA customer service.

CAUTION

This appliance is for household use. Any servicing other than cleaning and user maintenance shall be performed by an authorized service representative:

• Do not immerse base in water or try to disassemble.
• Do not put the appliance or any individual parts in the dishwasher.
• Check voltage to be sure that the voltage indicated on the name plate complies with your voltage. The name plate is located on the underside of the appliance.
• Never use warm or hot water to fill the water container. Use cold water only.
• Keep your hands and the cord away from hot parts of the appliance during operation.

There is a risk of scalds or burns on the spouts and the cappuccino frother / nozzle.

• Keep children away.
• Do not touch any hot parts. Use the handles or knobs provided.
• Ensure that the cappuccino frother / nozzle is correctly fitted and clean. If incorrectly fitted or if they become blocked, the cappuccino frother or its parts might come off.

NOTICE

• Never clean with scouring powders or hard implements.
• Ensure that the ventilation slots are not covered.
• Never pull out the drip tray during the brewing process. Only pull the drip tray when the display instructs you or when the appliance is ready for use.

NEVER DO (or you will void your warranty protection):

• Never fill instant coffee, chocolate mix etc. into the bean container or ground coffee funnel (filler funnel for ground coffee). It will damage the functioning of the brewing chamber.
• Never fill sugar coated coffee beans into the bean container. In case of doubt, call your dealer.
• Never fill anything other than coffee beans into the bean container (no chocolate, no rice, no nuts, no spices, nothing other than roasted coffee beans).
• Never fill frozen beans into the bean container. If you store beans in the freezer, let them thaw 3 to 4 hours before filling them into the bean container.
• Never fill anything but fresh, cold and clean water into the water tank, except when decalcifying.
• Never use mineral or carbonated water. You can use tap water, bottled water, spring water and reverse osmosis water.
• Never do anything with the machine which is not described in these instructions. In case of doubt, call your dealer.

Control Elements

1. Bean container with aroma preservation cover
2. Grinding wheel
3. On/Off button
4. Water tank (with cover)
5. Touch display
6. Height-adjustable dual spout
7. Cup platform
8. Coffee grounds container
9. Insert for drip tray
10. Drip tray
11. Power plug (back of the machine)
12. Service socket for optional JURA WiFi Connect
13. Powder chute for ground coffee
14. Filler funnel for ground coffee
15. Measuring spoon for ground coffee
16. Container for milk system cleaning

Preparing and using for the first time

Setting up the machine

When setting up your ENA, please note the following:

• Choose a spot for your ENA which protects the machine against overheating. Ensure that the ventilation slots are not covered.
• Place the ENA on a horizontal surface that is not sensitive to water.

Filling the bean container

NOTICE: The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.

• Only use roasted, untreated coffee beans to fill the bean container.
• Remove the aroma preservation cover.
• Remove any dirt or foreign objects from inside the bean container.
• Fill the bean container with coffee beans and close the aroma preservation cover.

Determining the water hardness

When you use the machine for the first time, you must set the water hardness. If you do not know the hardness of your water, you can find this out first. Use the Aquadur® test strips supplied with the machine.

• Hold the test strip under flowing water for one second. Shake off the water.
• Wait for about 1 minute.
• You will then be able to read the degree of water hardness from the discoloration of the Aquadur® test strip and the description on the packaging.

Level /Display German Degree (°dH) /Degrees of general hardness (°dGH)/ Parts per million (ppm)/ Indicator Strip number of ‘reddish’ fields

Not active…………

First-time use

WARNING: If the machine is operated with a defective power cord, there is a danger of potentially fatal electric shock.

• Never use a machine which is damaged.
• Never use a machine which has a defective power cord.

NOTICE: Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

• Only fill the water tank with fresh, cold water.

The water volume is given as standard in ‘oz’. You can change this setting to ‘ml’ in programming mode (see Chapter 6 ‘Machine settings’).

• Precondition: The bean container has been filled.
  • Insert the power plug into a power socket.
  • Press the On/Off button to switch the ENA on. ‘Choose language’ / ‘English’
  • Warning: To display more languages, touch 9 or 0 until the desired language comes into focus (e.g. ‘English’).
• Touch ‘Save’.
  • ‘Saved’ appears briefly on the display.
  • ‘Water hardness’
  • Warning: If you do not know the hardness of your water, you must find this out first (see chapter 3 ‘Preparing and using for the first time – Determining the water hardness’).
• Touch 9 or 0 to change the water hardness setting.
• Touch ‘Save’.
  • ‘Saved’ appears briefly on the display.
  • ‘Insert filter’
• Place a receptacle under the dual spout.
• Remove the water tank and rinse it with cold water.
• Fit the filter cartridge extension supplied on top of the CLEARYL Smart filter cartridge.
• Insert the filter cartridge with its extension into the water tank.
• Fill the water tank with fresh, cold water and reinsert the tank.

  •   *  **Warning:** The machine automatically detects that you have just inserted the filter cartridge.

  • ‘Saved’
  • ‘Insert filter’, the filter is rinsed. Water flows directly into the drip tray.
  • ‘System is filling’
  • ‘Empty drip tray’
• Empty the drip tray and put it back into the machine.
• Place the receptacle back under the dual spout.
  • ‘Machine is heating’
  • ‘Machine is rinsing’
  • The rinse stops automatically. The start screen is displayed. Your ENA is ready for use.

Managing your ENA – the JURA Cockpit

You can manage your ENA with the JURA Cockpit. Touch on the start screen to open the JURA Cockpit.

Symbol /Meaning

• ‘Maintenance’ section
• ‘Machine setting’ section
• Filter mode

Connecting milk

Your ENA creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 4–8 °C. We would therefore recommend using a milk cooler or a milk container.

• Remove the protective cover from the dual spout.
• Connect the milk pipe to the dual spout.
• Connect the other end of the milk pipe to a milk container or a milk cooler.

Your ENA is equipped with the HP1 milk system.

Connecting the machine to the WiFi network (optionally)

• Your ENA can be connected with your JURA app (J.O.E.®).
• Requirement: J.O.E.® is installed on your mobile device. The optionally available JURA WiFi Connect is inserted into the service socket of your ENA.
• For more information about setting up the WiFi Connect, please go to jura.com/wifi or scan the QR code.

Preparation

WARNING: Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

• Use extreme care when handling hot liquid or steam.
• Allow liquid to cool down before drinking.
• In the event of scalding, rinse affected area with cold water and seek medical attention.
• Keep children AWAY.

Basic information about preparing drinks:

Aim /What to do

• Change the coffee strength of a single product/ 9 or touch 0 during the grinding operation
• Change the amount for a single product/ 9 or touch 0 during the preparation

The longer you touch 9 or 0, the faster your setting changes.

Aim /What to do

• Change the consistency of grind, coffee strength, quantity and temperature for any given product/ Tap and hold a product for around 2 seconds and configure the settings under ‘Product settings’
• Display more products/ Touch to display additional pages of the start screen
• Replacing a product on the start screen/ Tap and hold a product for around 2 seconds and reposition it under ‘Reposition the product’
• Stop preparation/ Touch ‘Cancel’

Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend prewarming the cups. You can purchase a JURA cup warmer from your specialized dealer.

Preparation with preselection (Specialty Selection)

Touch to call up the Specialty Selection and activate the desired preselection for your next product:

• If you press your preselection briefly, the next product will be prepared according to your preselection.
• If you press and hold your preselection (for 2 seconds), the preselection will be active until you switch off your ENA.

Espresso and coffee

Example: Coffee

• Place a cup under the dual spout.
• Touch ‘Coffee’.
• The preset amount of water for coffee flows into the cup.

Two espressi and two coffees

Example: Two espressi

• Place two cups under the dual spout.
• Go to page 2 of the start screen ( ).
• Touch ‘2x Espresso’

Two brewing operations take place one after the other.
The preset amount of water for espresso flows into the cups.

Latte macchiato, cappuccino and other specialty coffees with milk

Your ENA prepares the following specialty coffees with milk at the touch of a button:

• Cappuccino
• Latte macchiato
• Flat white
• Cortado

Example: Latte macchiato
Precondition: Milk is connected to the dual spout.

• Place a glass under the dual spout.
• Touch ‘Latte macchiato’.
• The preset amount of milk foam flows into the glass.

Note

• There is a short interval while the hot milk separates from the milk foam. This allows the typical layers of a latte macchiato to form.
• The preset amount of water for espresso flows into the glass.
• 15 minutes after milk preparation, the milk system is automatically rinsed. Therefore always place a receptacle under the dual spout after preparing milk.

To ensure that the milk system in the dual spout always works properly, you must clean it daily (see chapter 7 ‘Maintenance – Cleaning the milk system’).

Caffè Barista

For the caffè Barista, the ENA blends the coffee with hot water using a special preparation method. This results in a full-bodied specialty coffee which is particularly easy to digest. You can change the amount of this additional water (see chapter 4 ‘Preparation – Adjusting the product settings’).

Espresso doppio

‘Doppio’ is Italian for ‘double’. When you select Espresso doppio, two espressi are prepared one after the other. The result is an extra full-bodied and aromatic specialty coffee.

Ground coffee

You can choose to use a second coffee variety, for example decaffeinated coffee, with the filter funnel for ground coffee.

Basic information about ground coffee:

• Never add more than one level measuring spoon of ground coffee.
• Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips.
• If you did not fill the machine with a sufficient amount of ground coffee, ‘Not enough ground coffee’ is displayed and the ENA stops the operation.
• The desired specialty coffee must be prepared within approximately one minute after filling with the ground coffee. Otherwise the ENA stops the operation and is once more ready for use.
• All specialty coffees with ground coffee are always prepared following the same model.

Example: Proceed as follows to prepare an espresso using ground coffee.

• Place an espresso cup under the coffee spout.
• Touch to call up the Specialty Selection.
• Touch .
• Touch ‘Espresso’.
• ‘Please add ground coffee’ / ‘Close filler funnel for ground coffee’
• Open the powder chute for ground coffee.
• Fit the filler funnel for ground coffee.
• Place one level measuring spoon of ground coffee into the filler funnel.
• Remove the filler funnel and close the cover of the powder chute.
• Touch ‘Next’.
• The preset amount of water for espresso flows into the cup.

Hot water

CAUTION

There is a danger of scalding from hot water splashes.

• Avoid direct contact with the skin.
• Place a cup under the dual spout.
• Touch ‘Hot water’.
• The preset amount of water flows into the cup.

Adjusting the grinder

You can adjust the grinder to suit the degree of roast of your coffee.

NOTICE: If you adjust the consistency of grind when the grinder is not operating, the grinding wheel could be damaged.

• Only adjust the consistency of grind when the grinder is running.
• The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.

Grinding wheel

1. Coarse consistency of grind setting
2. Fine consistency of grind setting

Example: Proceed as follows to change the consistency of grind during the preparation of an espresso.

• Place a cup under the coffee spout.
• Touch ‘Espresso’.
• Turn the grinder adjustment wheel to the desired position while the grinder is running.

Adjusting the product settings

Touch a product on the start screen for approximately 2 seconds to access the settings (‘Product settings’).

Example: Proceed as follows to change the coffee strength for one coffee.

• Touch ‘Coffee’ for approximately 2 seconds.
• Touch ‘Product settings’.
• Touch 0 or 9 to change the coffee strength setting.
  • Note: Touch the dots at the top right to access additional possible settings.
• Touch ‘Save’.
• Touch to return to the start screen.

Daily operation

Switching the machine on and off

• Place a receptacle under the dual spout.
• Press the On/Off button .
  • ‘Machine is rinsing’
• Your ENA is switched on or off.

Note

• When the machine is switched off, the system is only rinsed if a specialty coffee has been prepared.
• If milk has been prepared before switching off, you will be prompted to carry out milk system cleaning (‘Clean the milk system’). After 30 seconds the switch-off process continues automatically.

Filling the water tank

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

NOTICE

• Milk, sparkling mineral water or other liquids can damage the water tank or the machine.
• Only fill the water tank with fresh, cold water.
• Remove the water tank and rinse it with cold water.
• Fill the water tank with fresh, cold water and reinsert the tank.

Maintenance actions

Optimal coffee quality depends on many factors. One important prerequisite is regular maintenance of your ENA. Carry out the following steps:

Empty the drip tray and coffee grounds container and rinse with warm water (The insert for the drip tray, including the drip tray itself, and the coffee grounds

container are dishwasher-safe)

| Z| | Always empty the coffee grounds container when the machine is switched on. This is the only way of resetting the

coffee grounds counter.

Clean the milk system (if heavily soiled,

also dismantle it)

| Z| | See chapter 7 ‘Maintenance –

Cleaning the milk system’

Rinse the milk pipe| Z| |
Rinse the water tank| Z| |
Wipe the surface of the machine with a clean, soft, damp cloth (e.g. microfiber

cloth)

| Z| |
Changing milk pipe with connector HP1| | approx. every

3 months

---|---|---
Change the interchangeable milk spout CX1| | approx. every

3 months

Clean the inside of the water

tank with a brush

| | Z
Clean the top and bottom of

the cup platform

| | Z

You will find more information about maintenance of your ENA in the ‘Maintenance status’ section in the program item ‘Information’.

Machine settings

Touch to enter the cockpit. In the ‘Machine setting’ section, you can make the following settings:

Maintenance

WARNING: Use of maintenance products that are harmful to health and discharge of liquids during maintenance program. Harmful if swallowed. Irritating to eyes and skin.

• Keep children AWAY.
• Keep children away from the machine while it is performing a maintenance program.
• Avoid contact with skin and eyes.
• Avoid generation of dust. Do not inhale dust.
• When using do not eat or drink.
• Keep maintenance products away from food, drink and animal food.
• Keep container tightly closed and dry. Keep in a cool place.

Basic information about maintenance:

• Touch to enter the cockpit. This area consists of a ‘Maintenance status’ section and a ‘Machine setting’ section. You can manage the maintenance of your ENA in the section.
• The Cockpit shows maintenance programs that need to be carried out in the form of messages with red backgrounds. Touch the corresponding message to go straight to the maintenance program. Maintenance programs that are due imminently are indicated on your ENA by means of a bar display within the message.
• Carry out each maintenance program when you are prompted to do so.

Rinsing the machine

You can start coffee system rinsing manually at any time.

Precondition: The start screen is displayed.

• Place a receptacle under the dual spout.
• Touch .
• Touch the ‘Maintenance’ symbol .
• Touch ‘Rinse the coffee system’ to start the rinse operation.
  • ‘Machine is rinsing’
• The rinse stops automatically. The start screen is displayed.

Rinsing the milk system

After each milk preparation, the ENA prompts you to perform a milk system rinse. In the machine settings, you can set whether the milk system rinsing is to be initiated manually or automatically 15 minutes after preparation (see chapter 6 ‘Machine settings’).

Precondition: The start screen is displayed.

• Place a receptacle under the dual spout.
• Touch .
• Touch the ‘Maintenance’ symbol .
• Touch ‘Rinse the coffee system’ to start the rinse operation. ‘Milk system is being rinsed’
  • The rinse stops automatically. The start screen is displayed.

Cleaning the milk system

To ensure that the milk system in the dual spout always works properly, you must clean it daily when you have been preparing milk.

WARNING

• Non-recommended cleaning agents will not optimally remove milk residues. This may cause the cappuccino frother to become blocked and fly off the machine. Discharge of hot steam.
• Use only original JURA milk system cleaner.

WARNING: Harmful and irritating cleaning agent. Harmful if swallowed. Irritating to eyes and skin.

• Keep children AWAY.
• Avoid contact with skin and eyes.
• After contact with skin, wash immediately with plenty of water. In case of skin irritation, seek medical advice.
• After eye contact, immediately flush eyes with plenty of water and seek medical advice.
• If swallowed, rinse mouth immediately and drink large quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

JURA milk system cleaner is available from specialized dealers.
Use the container supplied for milk system cleaning.

Precondition: The start screen is displayed.

• Touch .
• Touch ‘Clean the milk system’.
• Touch ‘Start’.
• Remove the milk pipe from the milk container or milk cooler.
• Add 1 dosing unit of milk system cleaner to the front part of the container.
• Then fill with warm water up to the upper mark.
• Place the container under the dual spout and connect the milk pipe with the container.
• To connect the milk pipe to the container correctly, the pipe must be fitted with a connector.
• Touch ‘Next’.
  • ‘Milk system is being cleaned’
  • The operation is interrupted, ‘Fresh water’.
• Rinse the container thoroughly and fill the front part with fresh water up to the upper mark.
• Place it under the dual spout and reconnect the milk pipe with the container.
• Touch ‘Next’.
  • ‘Milk system is being cleaned’
  • The operation stops automatically.

Dismantling and rinsing the dual spout

If insufficient foam is produced when the milk is frothed or milk sprays out of the dual spout, the spout may be dirty. If this happens, dismantle and rinse the dual spout.

• Remove the milk pipe and rinse it thoroughly under running water.
• Pull the cover of the dual spout forwards and off.
• Remove the milk system from the dual spout.
• Dismantle the milk system into its individual parts.
• Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 8.5 oz (250 ml) water and one dosing unit of JURA milk system cleaner. Then rinse the individual parts thoroughly.
• Fit the air intake pipe.
• Reassemble the milk system. When doing this, note the numbering of the individual parts.
• Fit the assembled individual parts back in the dual spout and press it firmly.
• Refit the cover of the dual spout.

Inserting/changing the filter

Your ENA no longer has to be descaled if you are using the CLEARYL Smart filter cartridge.

• Once the filter cartridge stops working (depending on the water hardness setting), the ENA will prompt you to change the filter.
• CLEARYL Smart filter cartridges are available from specialized dealers.

Precondition: The start screen is displayed. (Alternatively, the filter symbol is displayed in red in the cockpit if the filter’s capacity has been exhausted.)

• Remove and empty the water tank.
• Remove the used filter cartridge from the water tank.
• Fit the filter cartridge extension on top of a new CLEARYL Smart filter cartridge.
• Insert the filter cartridge with its extension into the water tank.
• Fill the water tank with fresh, cold water and reinsert the tank. The machine has automatically detected that you have just inserted/changed the filter cartridge.
  • ‘Insert filter’, the filter is rinsed. Water flows directly into the drip tray.
  • The start screen is displayed.

Cleaning the machine

• After 160 preparations or 80 switch-on rinses, the ENA will prompt you to clean it.

WARNING

Non-recommended (e.g. liquid) cleaning agents may contain substances that could damage the machine or leave residues.

• Use only original JURA cleaning tablets. These are formulated especially for your machine.

WARNING: Harmful and irritating cleaning agent. Harmful if swallowed. Irritating to eyes and skin.

• Keep children AWAY.
• Avoid contact with skin and eyes.
• Avoid generation of dust. Do not inhale dust.
• After contact with skin, wash immediately with plenty of water.
• In case of skin irritation, seek medical advice.
• After eye contact, immediately flush eyes with plenty of water and seek medical advice.
• If swallowed, rinse mouth immediately and drink large quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

Note

• The cleaning program lasts approximately 20 minutes.
• Do not interrupt the cleaning program. The quality of cleaning will be impaired if you do so.
• JURA cleaning tablets are available from specialized dealers.

Precondition: ‘Clean’ is displayed in the cockpit.

• Fill the water tank.
• Touch ‘Clean’.
• Touch ‘Start’.
  • ‘Empty grounds’
• Empty the drip tray and coffee grounds container and put them back into the machine.
• Place a receptacle under the dual spout.
• Touch ‘Next’.
  • ‘Machine is being cleaned’, water flows out of the dual spout.
  • The operation is interrupted, ‘Add cleaning tablet’.
• Open the powder chute for ground coffee.
• Insert a JURA cleaning tablet into the powder chute.
• Close the powder chute.
• Touch ‘Next’.
  • ‘Machine is being cleaned’, water flows out of the dual spout repeatedly.
  • ‘Empty grounds’
• Empty the drip tray and coffee grounds container and put them back into the machine.

Descaling the machine

• The ENA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water.
• If you are using a CLEARYL Smart filter cartridge, you will not be prompted to descale.

WARNING

• Non-recommended descaling agents (e.g. vinegar) may contain substances that could damage the machine or leave residues.
• Use only original JURA descaling tablets. These are formulated especially for your machine.

WARNING: Harmful and irritating descaling agent. Harmful if swallowed. Irritating to eyes and skin.

• Keep children AWAY.
• Avoid contact with skin and eyes.
• Avoid generation of dust. Do not inhale dust.
• After contact with skin, wash immediately with plenty of water.
• In case of skin irritation, seek medical advice.
• After eye contact, immediately flush eyes with plenty of water.
• Remove contact lenses. Seek medical advice.
• If swallowed, rinse mouth immediately and drink large quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

NOTICE

• If the descaling operation is interrupted, there may be damage to the machine.
• Allow the descaling program to run to the end.

Note

• The descaling program lasts approximately 40 minutes.
• JURA descaling tablets are available from specialized dealers.
• If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out. Clean up any splashes immediately.

Precondition: ‘Descale’ is displayed in the cockpit.

• Touch ‘Descale’.
• Touch ‘Start’.
  • ‘Empty drip tray’
• Empty the drip tray and coffee grounds container and put them back into the machine.
  • ‘Agent in tank’
• Remove and empty the water tank.
• Completely dissolve 3 JURA descaling tablets in a receptacle holding 17 oz (500 ml) of water. This may take several minutes.
• Pour the solution into the empty water tank and insert it into the machine.
• Place a receptacle under the dual spout.
• Touch ‘Next’.
  • ‘Machine is being descaled’, water flows straight into the drip tray and out of the dual spout repeatedly.
  • ‘Empty drip tray’.
• Empty the drip tray and coffee grounds container and put them back into the machine.
  • ‘Rinse the water tank’ / ‘Fill water tank’
• Empty the receptacle and place it under the dual spout again.
• Remove the water tank and rinse it thoroughly.
• Fill the water tank with fresh, cold water and reinsert the tank.
• Touch ‘Next’.
  • Water flows straight into the drip tray and out of the dual spout repeatedly.
  • ‘Empty drip tray’
• Empty the drip tray and coffee grounds container and put them back into the machine.
  • Note: If the descaling operation stops unexpectedly, rinse the water tank thoroughly.

Descaling the water tank

Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.

• Remove the water tank.
• If you use a CLEARYL Smart filter cartridge, remove this.
• Completely fill the water tank and dissolve 3 JURA descaling tablets in it.
• Leave the water tank with the descaling solution for several hours (e.g. overnight).
• Empty the water tank and rinse it thoroughly.
• If you use a CLEARYL Smart filter cartridge, insert this again.
• Fill the water tank with fresh, cold water and reinsert the tank.

Cleaning the bean container

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time.

Precondition: ‘Fill bean container’ is displayed.

• Switch the machine off with the On/Off button .
• Remove the aroma preservation cover.
• Clean the bean container with a soft, dry cloth.
• Fill the bean container with coffee beans and close the aroma preservation cover.

Display messages

Messages on the start screen

chapter 5
tank’| prepare any products.| ‘Daily operation – Filling the water
 |  | tank’).
‘Empty| The coffee grounds container is full. /| Empty the coffee grounds container
grounds’ /| The drip tray is full. You cannot prepare| and the drip tray (see chapter 5 ‘Daily
‘Empty drip tray’| any products.| operation – Maintenance actions’).
‘Drip tray not| The drip tray is not inserted correctly| Fit the drip tray.
fitted’| or is not inserted at all. You cannot|
 | prepare any products.|
‘Fill bean| The bean container is empty. You| Fill the bean container (see chapter 3
container’| cannot prepare any specialty coffees,| ‘Preparing and using for the first
 | but you can prepare hot water and| time – Filling the bean container’).
 | milk.|
‘Too hot’| The system is too hot to start a| T Wait for several minutes until
 | maintenance program.| the system has cooled or prepare
 |  | a specialty coffee or hot water.

Messages in the cockpit

cartridge
symbol in the| filter is exhausted.| (see chapter 7 ‘Maintenance – Inserting/
cockpit lights|  | changing the filter’).
up red.|  |
‘Clean’| The ENA is prompting you to| Perform cleaning (see chapter 4
 | clean it.| ‘Preparation – Ground coffee’).
‘Descale’| The ENA is prompting you to| Perform descaling (see chapter 7
 | descale it.| ‘Maintenance – Descaling the machine ’).
‘Clean the milk| The ENA prompts you to| Perform milk system cleaning (see
system’| clean the milk system.| chapter 7 ‘Maintenance – Cleaning the milk
 |  | system’).

Troubleshooting

dual
produced when the milk|  | spout (see chapter 7 ‘Maintenance –
is frothed or milk sprays|  | Cleaning the milk system’).
from the dual spout.|  | T Dismantle and rinse the dual spout
 |  | (see chapter 7 ‘Maintenance –
 |  | Dismantling and rinsing the dual
 |  | spout’).
Coffee only comes out| Coffee or ground coffee has| T Put the grinder on a coarser setting
in drips when it is being| been ground too finely and| or use coarser ground coffee (see
prepared.| is blocking the system.| chapter 4 ‘Preparation – Adjusting the
 | The water hardness may not| grinder’).
 | have been correctly set.| T Perform descaling (see chapter 7
 |  | ‘Maintenance – Descaling the
 |  | machine ’).
There is dry ground| The beans used are resulting| T Reduce the coffee strength or choose
coffee behind the coffee| in an above-average volume| a finer grinder setting (see chapter 4
grounds container.| of ground coffee.| ‘Preparation – Adjusting the grinder’).
‘Fill water tank’ is not| There is a lot of limescale in| T Descale the water tank (see chapter 7
displayed although the| the water tank.| ‘Maintenance – Descaling the water
water tank is empty.|  | tank’).
Grinder is making a very loud noise.| There are foreign objects in the grinder.| Contact customer support in your country (see chapter 13 ‘JURA contact details / Legal information’).
---|---|---
‘Error 2’ or ‘Error 5’ is displayed.| If the machine has been
exposed to the cold for a long period of time, heating may be disabled for safety reasons.| Warm the machine at room temperature.
Other ‘Error’ messages are displayed.|  | Switch the ENA off with the On/Off button .
| | Contact customer support
in your country (see chapter 13 ‘JURA contact details / Legal information’).

If you were unable to solve the problem, contact customer support in your country (see chapter 13 ‘JURA contact details / Legal information’).

Transport and environmentally friendly disposal

Transport / Emptying the system

Keep the packaging for your ENA. It should be used to protect the machine during transport. In order to protect the ENA from frost during transport, the system must be emptied.

Precondition: The start screen is displayed.

• Remove the milk pipe from the dual spout.
• Place a receptacle under the dual spout.
• Touch .
• Touch the ‘Machine setting’ symbol.
• Switch to the page.
• Touch ‘Empty system’.
• Remove and empty the water tank.
  • The system is emptied.
  • Your ENA is switched off.

Disposal

• Please dispose of old machines in an environmentally neutral way.

Technical data

Directives

The machine complies with the following directives:

• Standard UL 1082
• Canadian Standard CSA C22.2 No. 64

FCC Rules

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.

JURA contact details / Legal information

JURA Elektroapparate AG

• Kaffeeweltstrasse 10
• CH-4626 Niederbuchsiten Switzerland

Customer Service

USA: JURA Inc.

• Phone:  1-800-220-5701
• E-Mail:info@us.jura.com
• Opening Hours (EST)
  • Mon – Thu 9 am – 9 pm,
  • Fri 9 am – 8 pm,
  • Sat 9 am – 5 pm
• Distributor Address: 20 Craig Road Montvale, NJ 07645
• Phone: 001 201-767-3999
• Fax:  001 201-767-9684
• Internet: us.jura.com

Canada: FAEMA

• Phone: 1-(855)-544-8600
• E-Mail:info@juracanada.ca
• Distributor Address: 115 Matheson Boulevard East Mississauga, Ontario, L4Z 1X8 1-(905)-501-8600
• Internet: ca.jura.com

You will find additional contact details for your country at jura.com.

Technical changes

We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colors of the machine. Some details of your ENA may vary.

Feedback

• Your opinion is important to us! Use the contact details at jura.com.

Copyright

The instructions for use contain information which is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG.

References

• Canada - JURA Canada
• JURA Coffee Machines: Latte Macchiato, Cappuccino, Espresso and Coffee - JURA
• JURA Coffee Machines: Latte Macchiato, Cappuccino, Espresso and Coffee - JURA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>