BATAVIA BT-NXS006 Compact Cordless Chainsaw Instruction Manual

BATAVIA BT-NXS006 Compact Cordless Chainsaw

Product Information

• Product Name: PACK 12V
• Model: N exxsaw|Compact cordless chainsaw
• Item-No.: 7064570
• Manufacturer: Batavia Power
• Website: www.bataviapower.com

Product Usage Instructions

1. Ensure to read and understand the instruction manual before using the product.
2. Always wear hearing protection to prevent hearing loss.
3. Wear safety glasses to protect your eyes from sparks, splinters, chips, and dust particles.
4. Use protective headgear to ensure safety during operation.
5. Wear safety gloves to protect your hands from potential injuries.
6. Use sturdy shoes to provide proper foot protection.
7. Avoid exposing the product to rain or water as it can damage the tool.
8. Beware of kickback, which can occur during operation. Maintain a firm grip on the tool and ensure proper technique to minimize kickback.
9. Keep a safe distance from electrical power lines to avoid any accidents or electrical hazards.

Overview

1. Protection cover
2. Head screw
3. Ventilation slots
4. Safety switch (power lock-off)
5. ON/OFF Switch
6. Handgrip
7. Battery
8. Hand guard
9. Sprocket cover
10. Base plate
11. Guide bar
12. Saw chain
13. Sprocket
14. Guide bar cover

Dear customer

• Please familiarize yourself with the proper usage of the device by reading and following each chapter of this manual, in the order presented. Keep these operating instruc-tions for further reference.
• Please read the enclosed “General safety instructions for power tools” and all additional safety instructions in this operating instructions!
• This manual contains important information on operating and handling the device. Keep these operating instructions for further reference. Please pass it on along with the unit if it is handed over to a third party.

Battery and charger not included!

• The battery is available separately under art. No: 7064221 (2Ah). The charger is avail-able separately under art. No: 7064222 (2.4A) or 7064223 (0.4A).
• These items are available online and in par-ticipating stores.

Explanation of the symbols

The following symbols are used in the user manual or on the product:

• Warning! To reduce the risk of injury, the user must read the instruction manual.
• Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instruc-tions in this manual.
• Always wear hearing protection. The effects of noise can cause hearing loss.
• Wear safety glasses. When working with electric power tools, sparks, splinters, chips and dust particles may be generated and these can cause loss of sight.
• Wear protective headgear.
• Wear safety gloves.
• Wear sturdy shoes.
• Do not expose to rain or water.
• Beware of kickback.
• Keep sufficient distance to electrical power lines.
• CE stands for “Conformité Européenne”, which means “In accordance with EU Regulations”. With the CE marking, the manufacturer confirms that this Electric tool complies with the applicable European directives.
• UKCA stands for: “UK Conformity Assessment”. This means “Compliant with UK regulations”. With the UKCA mark manufacturer confirms that this unit complies with the applicable UK regulations.
• Do not dispose of electric power tools with domestic refuse.

Additional safety instructions for Nexxsaw

• The Nexxsaw is designed for cutting branches. Only use the Nexxsaw as indicated in this manual for cutting wood. The machine has not been designed for continuous, professional use.
• Keep the Nexxsaw out of reach of children. It is not a toy.
• Persons with limited physical, sensorial or mental abilities are not allowed to use the Nexxsaw, unless they are super-vised for their safety by a qualified per-son or are briefed by the responsible person how to use the machine.
• Children and adolescents are not allowed to use the Nexxsaw. Excluded from this prohibition are young people over 16 years of age under the supervision of an expert for the purpose of training.
• Please note the warning symbols. They mark all those instructions which are important for safety reasons. Observe these instructions as failure to do so could result in serious injury!
• The Nexxsaw must be used only by one person at a time. Make sure bystanders do not stay in the vicinity of the Nexx-saw’s work area.
• Check the safe operating condition of the Nexxsaw, in particular the guide bar and the saw chain, before each operation.
• Always have a safe stand when working with the saw.
• Hold the machine firmly and securely when switching on.
• Make sure the guide bar and the saw chain must be free when switched on and must not come into contact with the workpiece to be cut.
• Keep your hands away from the sawing area. Do not reach under the workpiece. Contact with the saw chain may result in injury.
• Guide the Nexxsaw onto the workpiece only when switched on. Otherwise there is a risk of kickback if the saw chain gets caught in the workpiece.
• When sawing, the base plate must always face against the workpiece. The saw chain can become jammed and lead to loss of control over the machine.
• When the cut is completed, switch off the machine and then pull the saw chain out of the cut only after it has come to a standstill. This way you can avoid kickback.
• Clamp the material to be processed well. Do not support the workpiece with your hand or foot. Do not touch objects or the floor with the saw running. Dan-ger of kickback.
• When sawing converted timber and thin branches always use a strong support, such as a sawing trestle. Do not stack timber pieces.
• Before cutting logs, secure the logs in position.
• When working on sloping ground, make sure to work facing upwards.
• Be particularly careful when cutting splintered wood. Splinters of wood can be torn along by the saw chain and increase the risk of injury!
• Foreign objects such as nails, screws, metal parts, sand, etc. lead to increased wear on the guide bar and saw chain.
• A blunt saw chain can cause overheating and damage to the motor.
• Always pull out the battery when checking the chain tension, to re-tighten it, to mount the saw chain and to eliminate faults! Also remove the battery if you do not use the machine temporarily.

Safety instructions for multisaws

General multi saw safety warnings:

• Keep all parts of the body away from the saw chain when the multi saw is operating. Before you start the multi saw, make sure the saw chain is not contacting anything. A moment of inattention while operating multi saws may cause entanglement of your cloth-ing or body with the saw chain.
• Hold the multi saw by insulated grip-ping surfaces only, because the saw chain may contact hidden wiring. Saw chains contacting a “live” wire may make exposed metal parts of the multi saw “live’” and could give the operator an electric shock.
• Wear eye protection. Further protective equipment for hearing, head, hands, legs and feet is recommended. Adequate protective equipment will reduce personal injury from flying debris or accidental contact with the saw chain.
• Always keep proper footing and operate the multi saw only when standing on fixed, secure and level surface. Slippery or unstable surfaces may cause a loss of balance or control of the multi saw.
• When cutting a limb that is under tension, be alert for spring back. When the tension in the wood fibres is released, the spring loaded limb may strike the operator and/or throw the multi saw out of control.
• Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you or pull you off balance.
• Carry the multi saw by the handle with the multi saw switched off and away from your body. When transporting or storing the multi saw, always fit the guide bar cover Proper handling of the multi saw will reduce the likelihood of accidental contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and changing the bar and chain. Improperly tensioned or lubricated chain may either break or increase the chance for kickback.
• Cut wood only. Do not use multi saw for purposes not intended. For example: do not use multi saw for cutting metal, plastic, masonry or non-wood building materials. Use of the multi saw for operations different than intended could result in a hazardous situation.
• This multi saw is not intended for tree felling. Use of the multi saw for operations different than intended could result in serious injury to the operator or bystanders.
• Follow all instructions when clearing jammed material, storing or servicing the multi saw. Make sure the switch is off and the battery pack is removed. Unexpected actuation of the multi saw while clearing jammed material or ser-vicing may result in serious personal injury.
  • Do not operate a chain saw in a tree, on a ladder, from a rooftop, or any unstable support. Operation of a chain saw in this manner could result in serious personal injury.
  • Follow all instructions when clearing jammed material, storing or servicing the chain saw. Make sure the switch is off and the battery pack is removed. Unexpected actuation of the chain saw while clearing jammed material or servicing may result in serious personal injury.
  • Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the chain saw in unexpected situations.

Causes and operator prevention of kickback

Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Do not rely exclu-sively upon the safety devices built into your saw. As a multi saw user, you should take several steps to keep your cutting jobs free from accident or injury.

Kickback is the result of multi saw misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below:

• Maintain a firm grip, with thumb and fingers encircling the saw handle and position your body and arm to allow you to resist kickback forces. Kickback forces can be controlled by the opera-tor, if proper precautions are taken. Do not let go of the saw.
• Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the multi saw in unexpected situations.
• Only use replacement guide bars and saw chains specified by the manufacturer. Incorrect replacement guide bars and saw chains may cause chain break-age and/or kickback.
• Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback.

Before the first use
Remove the machine and all accessories from the package. Keep the packaging materials out of the reach of small children. There is a danger of suffocation!

Contents of packing

• 1× Nexxsaw
• 1× Protection cover
• 1× Guide bar
• 1× Saw chain
• 1× Battery
• 1× Charger
• 1× Instruction manual

Intended use

• The Nexxsaw has been exclusively designed for cutting branches. The saw is not intended for continuous commercial use.
• The intended use also includes an operation following the operating instructions.
• In conjunction with the extension handle, the Nexxsaw can be used as a pruner for cutting branches.
• Any use beyond these parameters (different media, applying force) or any changes (reconstruction, no original accessory) can lead to serious risks and is regarded as use that is contrary to the intended purpose.

Use

Mounting the saw chain
(See Fig. B).

Always wear gloves when handling the saw chain.

• Unscrew the head screw (2) counter-clockwise in order to remove the sprocket cover (9).
• Remove the guide bar from the machine and run the saw chain around it. Please note the running direction of the saw chain. The saw chain icon is shown on the cover.
• Run the saw chain over the sprocket (13) and replace the guide bar.
• Use an oiler to oil the saw chain and the sprocket.
• Re-tighten the sprocket cover (9) with the head screw (2) on the housing.

Lubrication
The saw chain must be lubricated when the tool is in operation.

CAUTION:

• Only use commercially available, biode-gradable chain oils.
• Do not use engine oil, waste oil or other mineral oils.
• Never use oil including dust and particles or volatile oil.
• If the saw makes a rattling noise, the chain must be lubricated.

Grease the chain of the Nexxsaw regularly with biodegradable oil.

Adjusting saw chain tension

CAUTION:
Do not tighten the saw chain too much. Excessively high tension of saw chain may cause breakage of saw chain, wear of the guide bar and breakage of the sprocket.

CAUTION:
A chain which is too loose can jump off the guide bar.

The saw chain may become loose after use. From time to time check the saw chain tension, certainly before each use.

• Remove the battery.
• Loosen the head screw (2) a bit to loosen the sprocket cover lightly.
• The tension spring automatically tight-ens the chain.
• Tighten the head screw (2) to secure the sprocket cover.

Switching ON and OFF
The use of the Nexxsaw without lubricating the chain with chain oil will damage the saw chain and the guide bar.

• Insert the battery into the battery recess.
• Hold the Nexxsaw firmly and securely by the handgrip.
• To switch on the Nexxsaw, first press the safety switch (4).
• Then press the ON/OFF switch (5).
• To switch off the saw, release the ON/OFF switch.

Break-in time for new saw chains

• Remove the battery and adjust the chain tension.
• Switch on the Nexxsaw and leave the motor running idle for approx. 5 minutes.
• Remove the battery and check the chain tension again. If necessary, re-tighten the chain.
• Afterwards make only easy cuts for approx. 30 minutes. Always ensure sufficient lubrication of the saw chain!Only use the Nexxsaw for heavier cuts and greater cutting depths after the running-in period has expired.
  • Use only a sharp saw chain. A blunt saw chain can jam more easily. Check the chain tension more frequently when working with a new saw chain, as the chain stretches more at first.
  • The service life of a saw chain depends on sufficient lubrication and the correct tension.
  • During operation, the chain heats up and re-tensioning may be necessary. Relax the chain after work so that it is not too tight the next time the cold machine is used.
  • Do not re-tighten saw chains that have become too hot. After it has cooled down, it may contract and lie too tight against the guide bar. Wait until the saw chain has cooled down before re-tensioning.
  • The tension of the saw chain is important for your safety and the function of the machine. A correctly tensioned saw chain increases the service life of the machine.
  • Check the chain tension before each use.
  • The saw chain is correctly tensioned if it can be pulled around the sword by hand (wear protective gloves) without sagging.
  • With new saw chains, you must readjust the chain tension again after a short period of operation.

Work instructions

• Never reach over the protection cover (1) or under the base plate (10). There is a risk of injury!
• Do not start the saw if the saw chain is in contact with the workpiece, is in the workpiece or can hit an object. This can lead to serious injuries.
• Clamp loose workpieces before cutting them. Remove foreign objects such as nails, screws, etc.
• When cutting a branch that is under tension be alert for spring back. When the tension in the wood fibres is released, the spring-loaded limb may strike the operator and/or throw the Nexxsaw out of control.
• Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you or pull you off balance.
• When the saw chain is running, first place the base plate (10) on the surface of the workpiece and let the saw cut on its own. Apply only light pressure to the saw. The chain speed should not be much slower.

Changing the saw chain

• Only handle the saw chain with gloves and remove the battery first!
• Inspect the saw chain and the guide bar for damage or signs of wear.
• Never put a new saw chain on a worn guide bar.
• Let each new saw chain break-in first!
• When attaching the saw chain, observe the running direction!

Kickback

• The shape of the protection cover (1) largely eliminates the risk of kickback.
• The saw is optimally protected against kickback by the protection cover with tip protection. Never remove the protection cover (1). There is a risk of injury!

Sharpen the saw chain

• The saw teeth must be sharpened if the sawdust becomes powdery, if additional force is required for the incision, if a straight incision is no longer possible or if the vibrations become stronger.
• Blunt saw chains should be re-sharpened.
• To sharpen the chain use a chain sharp-ener, make sure you sharpen the chain at a 30° angle.
• Or have the chain re-sharpened professionally (advised).
• Replace the saw chain if there is considerable damage that cannot be repaired by filing.

Cleaning the guide bar

• Thoroughly clean the notch of the guide bar.
• Replace the guide bar if the guide groove is damaged or worn and the saw chain has too much lateral space.

Maintenance, cleaning and storing

For best performance, always keep the saw chain and the Nexxsaw in good order. Remove the battery pack from the tool before carrying out any adjustment, servicing or maintenance.

• Clean the sprocket area with a brush or compressed air.
• Use a cloth, a paintbrush or a brush to remove dust and wood splinters. Always keep the ventilation slots clean and free from obstructions.
• We recommend that you clean your electric power tool immediately after each use.
• Clean the electric power tool regularly with a damp cloth and somewhat soft soap. Do not use any cleaning or solvent materials; these can attack the device’s plastic components. Make sure that no water can get inside the electric power tool.
• Do not let liquids of any kind enter the Nexxsaw.
• From time to time check that all screws are firmly secured.
• Store the Nexxsaw and the accessory indoors in a dry place that is protected from dust, dirt and extreme temperatures.
• Store the Nexxsaw out of reach of children and persons in need of supervision.

Technical data

• Battery voltage: 12 V Li-Ion
• No load speed: 4000 min-1
• No load chain speed: 5.08 m/s
• Total sword length: 154 mm
• Effective sword length: 118 mm
• Max. cutting depth: 118 mm
• Product weight without accessories: 0.97 kg
• Sound pressure level LpA: 81.4 dB(A)
• Uncertainty KpA: 3 dB(A)
• Sound power level LWA: 89.4 dB(A)
• Uncertainty KWA: 3 dB(A)
• Hand/arm vibration: 2.792 m/s2
• Uncertainty K: 1.5 m/s2

Vibration level
The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method (EN 62841) and may be used for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure.

Warning!
The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined.

It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is run-ning idle in addition to the trigger time). Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

Accessories optionally available

• Chain 6″ . . . . . . . . . . Item-No. 7064636
• Bar 6″ . . . . . . . . . . . Item-No. 7064637

Disposal
Do not dispose of electric power tools with domestic refuse. The electric power tool is shipped in packaging to reduce transport damage. This packaging is a raw material and as such can either be reused or can be fed back into the raw material cycle. The elec-tric power tool and its accessories are made from various materials such as metals and plastics. Take defective compo-nents to a special refuse collection point. Ask about these at your specialist shop or local council.

Batteries
Think of the environment when disposing of batteries. Contact your local authorities to find out where your nearest disposal area is. Do not dispose of batteries with domestic refuse. Do not dispose of by burning, risk of explosion.

Declaration of conformity

EC-Declaration of conformity
We, the Batavia B.V., Weth. Wassebali-estraat 6d, NL-7951 SN Staphorst, declare by our own responsibility that the product Nexxsaw, Item-No 7064570, Model Nr. BT–NXS006 is according to the basic requirements, which are defined in the Euro-pean Directives Electromagnetic Compati-bility 2014/30/EU (EMC), 2006/42/EC (Machinery), RoHS: 2011/65/EU and their amendments.

For the evaluation of con-formity, the following harmonized standards were consulted:

• EN 62841-1:2015
• EN ISO 12100:2010
• EN IEC 55014-1:2021
• EN IEC 55014-2:2021
• EN IEC 61000-3-2:2019
• EN 61000-3-3:2013/A1:2019
• EN 60335-1:2012/A13:2017
• EN 60335-2-29:2004/A11:2018
• EN 62233:2008
• EN 62133-2:2017
• AfPS GS 2019:01

Staphorst, 26 June 2023

Jin Min, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d, 7951 SN Staphorst, Netherlands.

UK Declaration of Conformity
We, the Batavia B.V., Weth. Wassebali-estraat 6d, NL-7951 SN Staphorst, Nether-lands declare by our own responsibility that the product Nexxsaw, Item- No 7064570, Model Nr. BT–NXS006 is according to the basic requirements, which are defined in the UK Regulations Supply of Machinery (Safety) Regulations 2008, Electromag-netic Compatibility Regulations 2016, Restriction of the Use of Certain Hazard-ous Substances in Electrical and Elec-tronic Equipment Regulations 2012 and their amendments.

Staphorst, 26 June 2023

Jin Min, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d, 7951 SN Staphorst, Netherlands.

The product and the user manual may be subject to changes. Technical data may be changed without prior notice.

WARRANTY

2 YEAR WARRANTY

This product has got a 2 year warranty
Dear Client, if for any reason this product is not working, please ensure you contact our Client Service Centre. Ensure you have your original receipt of purchase. This warranty covers all defects in workmanship or materials in this Batavia product for a two year period from the date of purchase. The warranty does not cover any malfunction, or defect resulting from misuse, neglect, alteration, or repair.

• service@batavia.eu.
• Monday till Friday 08.00 — 17.00
• (DE) 0800 664 7740
• (EUR) 00800 664 774 00
• www.bataviapower.com.

BATAVIA B.V. | Weth. Wassebaliestraat 6d | 7951SN Staphorst | Netherlands.

References

• Home - Batavia B.V.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>