CREATIVE MF8460 Stage SE Mini Monitor Soundbar User Guide

CREATIVE MF8460 Stage SE Mini Monitor Soundbar

STAGE SE MINI

1. Dual Custom-tuned Full-range Drivers
2. LED Indicator
3. 3.5 mm Headphone Output Port
4. Multifunction Button (Bluetooth® Connectivity / Source Switching)
5. Volume Knob
6. Built-in Rear Port Tube
7. USB-C Port  (USB Power and USB Audio)

CONNECTIVITY

Bluetooth mode

1. PC / Mac

2. Tablets / Mobile Devices

3. Nintendo Switch™ (Handheld Mode)

4.  Headphones

Side View

Back View

CONTROLS

TECHNICAL SPECIFICATIONS

• Power Output Up to 12W RMS, 24W Peak Power Frequency Response: 68–20,000 Hz
• SNR : ≥ 75 dB
• Bluetooth Version : Bluetooth 5.3
• Operating Frequency  2402–2480 MHz
• Operating Range  Up to 10m / 33 ft, measured in open space. Walls and structures may affect range of device
• Maximum RF Output Power 4 dBm Supported Bluetooth Profiles:

A2DP (Advanced Audio Distribution Profile),
AVRCP (Audio / Video Remote Control Profile)

Supported Codecs: SBC
Sandbar Input rating: 5V 3.0 A Maximum Operating Temperature: 45°C

OTHER INFORMATION

Please visit creative.com/compliance/Stage Seminar for the user guide, safety and regulatory information. Please visit creative.com/support/  for all other support related to your product.

Press and hold the Multifunction button for 8 seconds to perform a Master Reset. Upon completion, a voice prompt will be triggered, “Reset To Factory Default”, and the sound bar will revert to its default state.
Master Reset is reserved for cases where users encounter issues while the sound bar is in use or during situations such as: Bluetooth Pairing failure, random LED display blinks, or to reset all data.

FIRMWARE UPDATE
To update the firmware of Creative Stage SE mini, visit creative.com/support/StageSEmini. If an update is available, locate the firmware file on the Support page to download. A PC is required to perform this action. Once downloaded, copy the file onto an external USB drive and plug it into the USB-C port on the back of the sound bar.
Hereby, Creative Labs Pte. Ltd. declares the Bluetooth Speaker, model

SAFETY & REGULATORY INFORMATION

The following sections contain notices for various countries.

CAUTION
This product is intended for use with FCC/CE certified computer equipment. Please check the equipment operating/installation manual and/or with the equipment manufacturer to verify/confirm if your equipment is suitable prior to the installation or use of the product.

Notice for USA
Federal Communication Commission (FCC) Interference Statement FCC Part 15.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if no installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed with computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded and grounded. Operation with non-certified computers or non-shielded cables may result in interference to radio or television reception.

MODIFICATION Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Creative Stage SE mini (MF8460) Additional Safety and Regulatory information

SAFETY & REGULATORY INFORMATION

Notice for Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licensed -exempt RSS(s). Operation is subject to the following two conditions.

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>