MONOPRICE 44434 Blackbird 8K 2×1 HDMI 2.1 Switcher User Guide

June 13, 2024
Monoprice

MONOPRICE-LOGO

MONOPRICE 44434 Blackbird 8K 2×1 HDMI 2.1 Switcher

MONOPRICE-44434-Blackbird-8K-2x1-HDMI-2-1-Switcher-
PRODUCT

Thank you for purchasing this product
To ensure optimum performance and safety, read the following instructions before connecting, operating, or adjusting the product. Keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may have been damaged by electrical spikes, surges, electric shocks, lightning strikes, etc. The use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Introduction

The BK2x1 HDMI 21 switcher can switch any 2 HOMI sources into1 HDMI display. Video resolution is supported up to 8K@60Hz 4:4:4, 48Gbps video bandwidth, making it suitable for outdoor display, video conference, security monitoring, home theater, and other applications.
Use theHDMI BK switcher to connect from HDMI IN1 and HDMI IN 2 ports to two HDMI source devices via an individual cable before connecting from the HDMI OUT port to an ex ternal monitor (such as an HDMI projector, HDMI TV, or HDMI ordinary display). Switch between two sources by pressing the switch button on the top panel of the switcher. In order to make sure that your display shows normally, it is highly suggested to plug the Micro USB cable into the USB device to power the switcher. Always remember that the switcher is not a bi- directional switcher. It can only be used from two sources to one display (only 2 in1 out, notl in 2 out).
The device works well with Xbox or PlayStationS, achieving 4K@120hz on your televisions or relative monitors.

Features

  • HDMI 21 and HDCP 23 compliant
  • 48Gbps video bandwidth
  • 8K@60Hz 4:4:4 8/10/12bit, 8K@60Hz 4:2:012-bit, 8K@30Hz 4:4:410-bit, and 4K@120Hz 4:4:410-bit video support
  • HOR, HDR10, HDR10+, Dolby Vision, and HLG pass-through
  • VRR, FVA, and ALLM
  • HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio 2×1 switch output, auto-switch supported
  • Built-in Equalizer and Driver
  • Auto EDID management
  • Compact design for easy and flex ible installation

Package Contents

  • 1 x BK Two-Input HOMI Switcher
  • 1 x Micro use Power Cable
  • 1 x User Manual

Operation Controls and Functions

MONOPRICE-44434-Blackbird-8K-
2x1-HDMI-2-1-Switcher-FIG-4

Notes:

  1. While using the HDMI switcher, a power supply via the Micro USB cable is not necessary, but in case some of your HDMI devices have insufficient power, please connect the Micro USB cable to your USB devices for power supply.
  2. If you need to use the switcher to output signals of 4K@120Hz or 8K@60Hz, please make sure that your HDMI cable, HDMI signal source, and HDMI display all support the resolution above.
  3. The length of the HDMI cables connected to both ends of the switcher should not be too long in order to prevent a flickering screen. The following HDMI cables are suggested:
  • 8K60, 8K30, 4K120: Ultra HDMl21 cable, IN/OUT 2 meters.
  • 4K60 4:4:4: HDMl20 cable, IN/OUT 3 meters.
  • 4K60 4:2:0, 4K30, 1080P: HDMI cable, IN/OUT 5 meters.

Application Example

MONOPRICE-44434-Blackbird-8K-2x1-HDMI-2-1-Switcher-
FIG-2

Specifications

MONOPRICE-44434-Blackbird-8K-2x1-HDMI-2-1-Switcher-
FIG-5

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to note. If you have any problems with your order, please give us an opportunity to make it right You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com Check the website for support times and links.

TECHNICAL SUPPORT

Monoprice™ is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com or through email by sending a message to tech@monoprlce.com. Check the website for support times and links.
To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and type 44434 into the search bar. If available, support files are linked at the bottom of the product page.

REGULA TORY COMPLIANCE  Notice for FCC

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation

Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements fOf Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help.

Notice for ISED Canada
This Class Bdigital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe Best conforme a la norme NMB-003 du Canada.

The termsHDMI and HDMIHigh-DefinitionMultimedia interface, and theHDMI logo ;re tradefTliTks or registered trademarks of HDMI licensing LLC in the United States and other countries.
Monoprke'”‘ and al/Monoprice bgos ;re tradem;rksof Monoprke Inc

  • www.monoprice.com
  • Need Help? We’re here for you!
  • Contact Us:www.monoprice.com/contactus
  • Product pictures are for reference only.
  • Specifications described herein are subject to change without prior notification.
  • Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
  • Copyright © 2022 Monoprice, Inc. All rights reserved.
  • Monoprice, Inc.
  • 1 Pointe Drive, Suite 400
  • Brea, CA 92821 – USA
  • www.monoprice.com

Documents / Resources

| MONOPRICE 44434 Blackbird 8K 2x1 HDMI 2.1 Switcher [pdf] User Guide
44434, 44434 Blackbird 8K 2x1 HDMI 2.1 Switcher, Blackbird 8K 2x1 HDMI 2.1 Switcher, 8K 2x1 HDMI 2.1 Switcher, 2x1 HDMI 2.1 Switcher, HDMI 2.1 Switcher, 2.1 Switcher, Switcher
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Monoprice User Manuals

Related Manuals