MONOPRICE MP44523 BT-10 Bluetooth w-aptx HD Earbuds User Manual

MONOPRICE MP44523 BT-10 Bluetooth w-aptx HD Earbuds

MonopriceTM BT-10 Bluetooth w/aptx HD Earbuds

The MonopriceTM BT-10 Bluetooth w/aptx HD Earbuds (P/N 44523) are a high- quality wireless audio solution for your mobile devices. They feature aptX HD audio technology, which provides high-fidelity audio over Bluetooth, and are designed to provide a comfortable and secure fit for extended listening sessions.

Package Contents

Diagram

How to Wear

To get the best wearing experience, please align the triangle icons on the ear fins and earbuds.

Pairing Process

First Use

1. Enable Bluetooth on your phone/device.
2. Power on Earphones using the MFB button and paring mode will begin automatically. Orange and white lights will start flashing alternately with the voice prompt: “Pairing”.
3. Search for the Bluetooth Device and select “MP44523”. (Enter the code “0000” if prompted).
4. When pairing is successful, you will hear the voice prompt: “Connected”.

Pair with Another Device

1. In the state of shut-down, press and hold the MFB button for 5-7 seconds. Wait for the orange and white lights start flashing alternately with the voice prompt: “Pairing”, then release MFB button.
2. Follow steps 3 and 4 above to pair to your phone/device.

Notification

1. Please fully charge the earphones before the first use.
2. Please fully charge the earphones before storing for an extended period of time.
3. Please recharge the earphones after 2 months of storage to keep the battery in optimal condition.

Power ON / OFF

Redial

Volume Control

Reset

In the state of power-on, simultaneously hold down the MFB button and the Volume + button for 5 seconds to reset.

Charge Battery

Radio Notice for FCC

FCC ID: 2ADDH-44523

Caution
This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:   The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Radio Notice for ISED Canada: IC: 24103-44523
This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

www.monoprice.com

Need Help? We’re here for you.
Contact us: www.monoprice.com/contactus
Product pictures are for reference only. Specifications described herein are subject to change without prior notification. MonopriceTM and all Monoprice logos are trademarks of Monoprice Inc. Copyright © 2023 Monoprice, Inc. All rights reserved.

Monoprice, Inc. 1 Pointe Drive, Suite 400 Brea, CA 92821 – USA
www.monoprice.com
Tel. 877.271.2592

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>