MONOPRICE 44521 Wireless Keyboard and Wireless Mouse Bundle User Manual

May 15, 2024
Monoprice

MONOPRICE-LOGO

MONOPRICE 44521 Wireless Keyboard and Wireless Mouse Bundle

MONOPRICE-44521-Wireless-Keyboard-and-Wireless-Mouse-Bundle-
PRODUCT

Package Contents

  • 1x Monoprice Wireless Myusard
  • 1x nano USB receiver (stored inside the mouse)
  • 1x User Manual

Introduction

  • The Monoprice Wireless Keyboard and Wireless Mouse Bundle features a split ergonomic 2.4GHz wireless keyboard with full-size keycaps for a professional typing experience. The split ergonomic design encourages natural hand, wrist, and forearm positioning. A cushioned palm rest provides support and promotes a neutral wrist position to keep you perfectly comfortable during long typing sessions.
  • The included 2.4GHz wireless mouse features an ergonomic streamlined design with easy
  • DPI adjustments using the convenient DPI Adjust Button. The nano USB receiver fits inside the mouse compartment for easy transport.
  • The stylish Monoprice Wireless Keyboard and Wireless Mouse Bundle is a perfect match for you and your computer and will help to increase your productivity while boosting your comfort level.

Safety Instructions

Please read the following carefully before using this product. Incorrect use of this product may result in reduced performance, permanent damage and void warranty:

  1. Do not place this product near a heat source.
  2. Operating temperature of 5°c to 50°c. Storage temperature of -20° to 60°C.
  3. Do not place this product near moisture or liquids.
  4. Operate and store at a humidity of 10% to 85% (non-condensing)
  5. Do not place heavy objects on this product.
  6. Do not drop this product.
  7. Do not dispose of this product in the garbage. Take it to your local recycling center.

Keyboard Diagram

MONOPRICE-44521-Wireless-Keyboard-and-Wireless-Mouse-Bundle-
FIG-3

  1. Num Lock Indicator Light
  2. Caps Lock Indicator Light
  3. Battery Indicator Light
  4. En KeyBattery Compartment
    (Battery is not included)

Shortcut Key Mode

  • Shortcut key mode is the default mode of this keyboard. Please refer to the diagram below to understand the tasks of each shortcut key.
  • Fn+Esc – Switch between Shortcut and Function key modes.
  • Press the “Fn” and “Esc” keys simultaneously to switch to standard F1-F12 function key mode. Fn Lock LED will turn On. When you want to switch back to shortcut key mode, press the “Fn” and “Esc” keys simultaneously. Fn Lock LED will turn off. Please note that when you start/restart your computer, or simply unplug the keyboard from your computer, the top row keys will automatically restore to shortcut key mode.

MONOPRICE-44521-Wireless-Keyboard-and-Wireless-Mouse-Bundle-
FIG-1

Note: Above shortcuts are not global and may work differently from one app to the other. Please try out the shortcuts in your app first and/or check the menuof your app to learn more about its shortcuts.

Mouse Diagram

DPI Indication

MONOPRICE-44521-Wireless-Keyboard-and-Wireless-Mouse-Bundle-
FIG-4

CORRECT DISPOSAL OF THIS PRODUCT

  • Number of buttons: 4D
  • Key switch life: more than 3 million times
  • Coding switch life: more than 300,000 revolutions
  • Left and right button operating force: 60-70gf
  • Roller torque front and rear: 10-40gf
  • Dpi resolution: Highest 1600DPI
  • Mouse receiving: USB

SYSTEM SUPPORTS

  • Windows 2000/2003/XP/
  • Vista/Win7/8
  • IBM compatible computer and PC

Correct Disposal of This Product

(Waste Electrical and Electronic Equipment)

  • This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. other types of waste and recycle it responsibly to promote the sustainable reuse of material resort els Hou support users should contact either the retailer where they purchased this product or their local government office, for details of where and how to contact either the retailer where they purchase this product or their local government office, for details of where and how they can take this item for environmentally safe recycling.
  • Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Warranty

Warrants that this product will be free from defects its title materials and manufacturing workmanship for 1 year. If the product is found to be defective then as your sole remedy and as the manufacturer’s only obligation, will repair or replace the product. This warranty is exclusive and is limited to the P/N 44521. This warranty shall not apply to products that have been subjected to abuse, misuse, abnormal electrical or environmental conditions, or any condition other than what can be considered normal use. The liability of T01 arising from this warranty and sale shall be limited to a refund of the purchase price. In no event shall Monoprice be liable for costs of procurement of substitute products or services or for any lost profits, or for any consequential incidental direct or indirect damages, however, caused and on any theory of liability arising from this warranty and sale. These limitations shall apply notwithstanding any failure of the essential purpose of any limited remedy.

FCC

REGULATORY COMPLIANCE
Notice for FCC

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radio Notice for FCC Caution

This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modifications to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Radio Notice for ISED Canada:
This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Radio Frequency Exposure
This device meets the ISED Canada requirements for exposure to radio waves and is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy. To comply with Canada RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter.

Notice for ISED Canada
CAN ICES-3 (B)/NMB-3(B)

Need help? We’re here for you!
Contact us: www.monoprice.com/contactus

Product pictures are for reference only.
Specifications described herein are subject to change without prior notification.
Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
Copyright © 2023 Monoprice, Inc. All rights reserved.

Monoprice Inc.
1 Pointe Drive, Suite 400
Brea, CA 92821 – USA
www.monoprice.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Monoprice User Manuals

Related Manuals