Tribit BTS13 Portable Wireless Speaker Instruction Manual

June 13, 2024
Tribit

Tribit logo StormBox Flow
Porttle Wreess Spesker
Instruction ManualTribit BTS13 Portable Wireless
Speaker

BTS13 Portable Wireless Speaker

Tribit BTS13 Portable Wireless Speaker - USB cable

Hereby, Thousandshores Deutschiand GmbH declares that the. racio equipment type Portable Wireless Speaker BTSIS is in ‘complance with Directive 2014/53/EL.
The ful text of the EU deciaration conformity is available at the folowing interet address: http://filestribit.com/BTST3-eu-docpdf.

To Charging The Speaker

Tribit BTS13 Portable Wireless Speaker - Charging The
SpeakerWhnen charging, the red light s ahways on.
Whnen fuly charged (about 4 hours), the red light tums off.

To Charging Other Devices

Tribit BTS13 Portable Wireless Speaker - Charging Other
DevicesUse the speaker’s USB-C port to connect and charge exteral devices.
The speaker stops charging extemal devices when the battery level drops below 50%.

Power On/Off

Tribit BTS13 Portable Wireless Speaker - Power On offShort press the power button once to tum onioff the power.
Tne speaker will automatically shut down when there is no audio input or operation for 15 minites.

Pairing

Tribit BTS13 Portable Wireless Speaker - PairingShort press the Bluetooth button once to enter pairing mode.
Long press the Blustooth button 25 to disconnect the Blustooth connection.
The speaker can be connected to up to two Bluetooth devices at the same time.

Controls

Tribit BTS13 Portable Wireless Speaker - Controls

x1: Press once
x2: Press twice
x3: Press three times
2s: Press and hold for 2 seconds
Reset: Press and hold the +- button at the same time for 5s

EQ Selection

Tribit BTS13 Portable Wireless Speaker - EQ SelectionShort press the EQ button to switch the music mode.
The white fight is aways on for XBass mode.
The blue light is aways on for the audiobook mode.
The light is off for TRIBIT default sound.

Stereo Mode

Tribit BTS13 Portable Wireless Speaker - Stereo Mode

  1. First connect speaker A to Bluetooth on your phone and then press the TWS button;
  2. Ensure that speaker B is not connected to any device, and then press the TWS button;
  3. Both speakers broadcast voice at the same time, indicating that the TWS is successful and speaker A is the host.

Party Mode

Tribit BTS13 Portable Wireless Speaker - Party Mode

  1. Two speakers already in stereo mode, press any speaker TVVS button;
  2. Hear the voice announcement, indicating the switch to party mode.
    Long press any speaker TVVS button 2S to disconnect the group.

TRIBIT APP

Tribit BTS13 Portable Wireless Speaker - TRIBIT APP

|
---|---
Apple and the Apple Logo are trademarks of Apple Inc.| Google Play and the Google Play Logo are trademarks of Google Inc.

Download the TRIBIT app to adjust the EQ settings, upgrade the firmware and explore more features.

Safety Precautions

  • Do not place the speaker in a place where it is easy to fall.
  • Do not disassemble, repair or modify this product by yourself.
  • Keep the speaker away from extreme temperatures.
  • Do not use the speaker in an outdoor thunderstorm environment.
  • Do not use any corrosive cleaners or other chemical solutions to clean the speaker.
  • 12-month warranty.

Specifications

Bluetooth Version: V5.3
Output Power: 20W
Bluetooth Protocol: A2DP, AVRCP,HFP,HSP
Frequency Response Range: 50~20KHz
Frequency Band Range: 2402-2480MHz
Maximum Transmission Power: ≤ 6dBm
Battery: 3.7V, 5200MAh, 19.24Wh
Play Time: 30 hours (At 60% volume with XBass off)
Charging Time: About 4 hours
Waterproofing Grade: IP67
Size: 201mm x 90.4mm x 52.4mm
Weight: 660g

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These mits are designed to provide reasonable protection against harmful nterference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Tribit logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals