deli Digital SafeET547 Digital Hotel Safe Instruction Manual

September 29, 2024
DELI

deli Digital SafeET547 Digital Hotel Safe

INSTRUCTION MANUAL

MODEL: T547

Thank you for choosing DELI safe box, please carefully read the instruc­tions before use, and according to the instructions to operate correctly.

l. Product Unpacking

After opening the packaging box, please confirm whether the product appearance is intact and check off all accessories. In case af any loss or damage, please contact the dealer.

2. Product Diagram

3. First Use

When first use, please placing the product properly, take off the lock cover, insert the emergency key into the lock hole and turn clockwise to open the doar, and then install 4xAA alkaline batteries inta the battery box behind the door back.

4. Door Closing Methods

Close the door and insert the key into the keyhole, turn it counterclock­wise and then pull out the door is closed.

Hotel mode: Close the door and input 3-6 digits guest code,press the “Lock” button. When “CLOSED” is displayed, the door is closed.

Home mode: Close the door and press the “Lock” button directly, When “CLOSED” is displayed, the door is closed.

5. Door Opening Methods

1. Guest Password Opening
In the door closed state, enter the user password. When “OPENED” is displayed, the door is open.

2. Master Password Opening

In the door closed state, the master password is a 6-digits code. The procedure for opening with the master password as follows: Quickly press the “LOCK ” key twice, displaying “SUPER.” Enter the current valid master password (default master password is ·000000·1, and when ‘OPENED’ is displayed, the safe door will be opened automatically.

6. Change Guest Password

In the open state( make sure the locking bolts fully retracted ), push the door and enter a new 3-6 digit user password, then press the “LOCK’ button. When “CLOSED” is displayed, the door is closed automaticallbl, and the new user password has been successfully modified.

7. Change Master Possword

To change the master password, the safe box must be in the open state (with the locking bolts fully retracted). Follow these steps:

Enter ‘CLEAR’ key twice consecutively, displaying “PROG’.

Input the current valid master password (default master password is 000000).Press the “LOCK ” key, ‘NEW displayed.Then enter a new 6-digits master password. Press the “LOCK” key, displaying”DONE”, indicating the password successful modification.

8. Switching Between Home and Hotel Mades

1. Press the “CLEAR(*)” button twice, displaying “PROG.”

2.  Press the digits? 711469?. showing the programming interface. Details for mode switching are as follows:
3.  Home Mode: Press the digits 117051, then press the “LOCK” button three times consecutively to switch to home mode.
4.  Hotel Mode: Press the digits 117050, then press the “LOCK” button three times consecutively to switch to hotel mode.

9. Battery Energy Detection

Press the ?LOCK? key to enter the battery energy detection procedure. if the display shows “BATT-H” indicates the battery voltage is normal. If the display shows “BATT-L’ indicates the battery voltage is law; please replace the battery. If “BATT-L” is displayed when the door is closed, the battery voltage is low and the battery needs to be replaced as soon as possible.

10. Points for Attention

1. When the password is entered incorrectly, press the ‘CLEAR” key to delete all.

2.  If the password is entered incorrectly, the display shows “E-CODE.” and the buzzer sounds an alarm. You can reattempt the operation.
3.  If the incorrect password is entered continuously four times, the display shows “HOLD-5,” and the system enters a 5-minute automatic lockout state. After 5 minutes, you can retry the operation.
4.  In hotel mode. after entering the password, press the “LOCI<” key to lock the door. In home mode, could be directly press the “LOCK” key to lack the door. (The default setting is hotel mode.)

11. Precautions for Use and Installation

1. Do not place the User’s Manual emergency keys, and external battery box in the box, store them in another safe place instead.

2. If the product is not used for a long time, remove the battery to prevent leakage from damaging the electronic system.
3. For the sake of safety, be sure to fix the cabinet on a solid concrete wall.

12. Common Faults and Troubleshooting Methods

WARRANTY CARD

Thank 1:1ou for your purchase of our products. The interests of customers who purchase our products will be protected. For any malfunction due to product quality problems. please contact authorized local dealers or
service centers with this receipt and the warranty card.

Warranty terms:

l.For product failures occur under normal operating circumstances, free of charge repair and spare parts replacement service shall be provided by our compan1:1 within one year commencing from date of purchase.
2.customers are required to present this warranty card and the original purchase invoice to our company upon request for warranty service. This warranty card shall be valid only after the following form is filled out in details and affixed with official seal of the dealer.

3.No free of charge repair service shall be provided in the event of □n\:I of the following circumstances:

(1) Expiration of the warranty period;
(2) Dam□ges caused b\:I improper use, maintenance or storage not in accordance with the requirements of the user manual;
(3) Failure or damage resulting from unauthorized disassembly, repair or modification;
(4) Failure or damage caused by force majeure;
(5) Wear parts or accessories.

This warranty cord is being delivered with the product, one card for one product. Please keep this warranty cord in proper condition for free warranty service. There is no replacement if lost.

Dote of Purchase: Y M __

WARRANTY CARD

WARRANTY CARD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals