CLAS HU 2033 Key To Remove Fiat Submersible Pump Instruction Manual
- June 13, 2024
- CLAS
Table of Contents
CLAS HU 2033 Key To Remove Fiat Submersible Pump
Product Information:
- The HU 2033 Key is a tool designed to remove the Fiat submersible pump. It is manufactured by CLAS Equipements, a company based in Chignin, France. The tool is used to unlock the ring nut of the pump for maintenance or replacement purposes.
- If you require any additional components or parts for the pump, please contact the reseller. For any issues or technical problems, it is recommended to reach out to an authorized technician.
Contact Information:
- Email: sav@clas.com
- Phone: +33(0)4 79 72 69 18
- Website: www.clas.com
Product Usage Instructions
- Fix the tool onto the ring nut of the Fiat submersible pump (refer to fig. 1 for guidance).
- Ensure that the tool is securely attached to the ring nut.
- Rotate the tool to unlock the ring nut.
Please follow these instructions carefully to safely remove the Fiat submersible pump using the HU 2033 Key.
WARNING
Before returning this product for any reason (installation problem,
instructions for use, breakdown, manufacturing problem…), please contact us.
Contact :
- You can reach us by mail sav@clas.com or by phone +33(0)4 79 72 69 18 or go directly to our website clas.com
- If you have changed your mind regarding your purchase, please return this product before you attempt to install it.
INTRODUCTION
- It is compulsory to read this instruction manual before starting any kind of action.
- The proper operation and full compliance of this product’s performance is guaranteed only if all the instructions provided in this manual are closely adhered to.
- We guarantee that this product complies with the technical specifications described in this manual. The manufacturer shall not be held responsible for any improper uses other than those described herein.
- Use protective work gloves, protective footwear, hard hat and safety goggles.
Misuse:
- This product should only be used as described in this documentation; any other use is considered improper.
- The manufacturer accepts no responsibility for any damage caused by the incorrect or unreasonable use of the equipment.
- Moreover, misuse shall also void the warranty.
Take care of your tools:
- Be sure to store your tools in a clean state.
- Place the tools inside their original package.
INSTRUCTIONS
- Fix the tool on the ring nut (fig. 1)
- Make sure it is properly secured
- Turn to unlock the ring nut
ABOUT COMPANY
- CLAS Equipements
- ZA de la CROUZA 73800 CHIGNIN FRANCE
- Tél. +33 (0)4 79 72 62 22
- Fax. +33 (0)4 79 72 52 86
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>