2E E130 Computer Case Installation Guide

2E E130 Computer Case Installation Guide

Product: computer case.
Using: for placing components of personal computer system.
Model: 2Е-Е130.

DISCRIPTION

1. Front panel:
   1(а) 1х USB2.0, 2x USB3.0, HD AUDIO+MIC, Power, Reset, Power LED, HDD LED;
   1(c) place for case fans.

2. Rear panel:
   2(a) place for power supply;
   2(b) place for case fan. Pre-installed 1x80mm fan (3pin);
   2(c) expansion slots for VGA, network card, modem, audio card etc.

3. General part: place for motherboard.

4. Internal Bays:
   4(a) 2.5’’;
   4(b) 3.5’’.

5. Side panel (left): perforation.

6. Side panel (right).

Appearance and equipment of item can be supplemented or modified for the purpose of the improvement or for improvement of product quality.

COMPLETE SET

| Number| Item name| Quantity pcs
---|---|---|---
| 1| HDD Screw| 4
| 2| MB / SSD screw| 10
****| 3| PSU / VGA Screw| 5

SYSTEM COMPONENTS INSTALLATION

1. Remove side panels.
   Unscrew the screws from the rear panel, pull towards the rear of the case.

2. Motherboard installation.
   Place the case on the right side, place the motherboard in place and secure with screws
   

3. Power supply installation.
   Place the PSU on the top of the chassis and secure with screws.
   

4. 3.5’’ HDD installation.
   Place the HDD at the indicated location and secure with screws.

5. 2.5’’ SSD. installation.
   Place the SSD on the right side of the inside part of the case as shown on the picture and secure with screws.

6. VGA installation.
   Disconnect the PCI plug (from the back panel) and install VGA, then secure.
   

7. Case fans installation.
   Install the fans in the indicated locations in the саse: A (rear panel), B (side panel), C (front panel). Secure the fans.
   

8. I/O Ports, buttons, indicators.
   

OPERATING CONDITIONS AND PRECAUTIONS

1. Ensure that you have all the necessary parts before start to use case.
2. It`s important to use gloves during assembling and prevent injures of your hands.
3. Don`t use additional efforts when you fix components to prevent damage of case or case mounting.
4. Make sure that all components of the product are intact and functioning properly.
5. Do not use abrasive, whitening cleaners to clean the product to avoid scratches and surface damage.
6. Store and operate out of the reach of children and pets.

STORAGE, TRANSPORTATION AND UTILISATION

1. Transportation of product in original packing to avoid damages.
2. If components are already were installed in cases, please check how securely they are fixed or remove it before preparation of case for transportation.
3. Avoid contact with moisture or water on the surface or inside of case to prevent corrosion of material.
4. Utilization of case and it`s packing in accordance with utilization regulations in your country.

SPECIFICATION

80 (90) Top panel: non
Included fans, mm| Front panel: non Side panel: non Rear panel: 1х 80 Top panel: non
I/O Ports, buttons, indicators| 1х USB2.0, 2x USB3.0, HD AUDIO+MIC, Power,Reset, Power LED, HDD LED
Power supply, W / place| Non / on top
Max VGA length, mm| 320
CPU cooler height, mm| 148
Size (WxHxL), mm| 191×418х358
Package size (WxHxL), mm| 222x408x450
Weight without package,kg| 2,3
Weight with package,kg| 2,9
County of origin| Сhina
Warranty| 12 months

WARRANTY CARD

Dear Buyer! Congratulations on your purchase of the 2E brand computer case, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular product.

We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

1.  Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
2. The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
3. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
4. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
5. The product is removed from warranty service in the following cases:
   • misuse and non-consumer use;
   • mechanical damage;
   • damage caused by the ingress of foreign objects, substances, liquids, insects;
   • damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
   • damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
   • when operating equipment in the power supply network with a missing single ground loop;
   • in case of violation of seals installed on the product;
   • lack of serial number of the device, or inability to identify it.
6. The warranty period is 12 months from the date of sale

• Tear-off maintenance tickets are provided by an authorized service center.

The completeness of the product is checked. I have read the terms of the warranty service, no complaints.
Customer Signature

Product Information

Product:
Model:
Serial number:

Seller Information

Name of trade organization:
Address:
Date of sale:
Seller stamp:

Warranty coupons

Ticket number 3

Seller stamp:
date of the application:
Cause of damage:
Date of execution:

Ticket number 2

Seller stamp:
date of the application:
Cause of damage:
Date of execution:

Ticket number 1

Seller stamp:
date of the application:
Cause of damage:
Date of execution:

References

• Компания ERC: Сервис-центр(СЕРВІСНИЙ ЦЕНТР)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>