DOAGEAS E9 True Wireless Earbuds with Bluetooth Speaker BT 11 Instruction Manual
- June 5, 2024
- DOAGEAS
Table of Contents
DOAGEAS E9 True Wireless Earbuds with Bluetooth Speaker BT 11
Product Description
This product is an half in ear TWS Bluetooth Earbuds+integrated hanging buckle combination speaker, with compact and lightweight ergonomic design and built- in low-power high-performance Bluetooth version 5.1 chip and integrated Bluetooth hanging buckle speaker charging compartment.It can adapt to various modes of listening scenes such as sharing and private. The compact body supports the luggage buckle lock, which can be carried with you regardless of outdoor climbing or hiking.
Technical parameters
- Bluetooth name of speaker: BT11
- Bluetooth name of earbuds: E9-ANC
- Working current: 100mA
- Quiescent current: 5UA
- Bluetooth Version: V5.1 SNR: >=85db
- Effective distance: 10 meters
- Charging port: Type-C
- Key type: Button
- Low voltage reminder: Yes
- Audio range: 100-20Khz
- Input power: 5V 500mA
- Speaker specifications: 36 Internal magnetic/3W
- Rechargeable battery specification: 3.7V 300mAH
- Headsets battery specification: 3.7V 30mAH
- Speaker playing time: 3-4hours
- Headsets playing time: 24 hours
- Support protocol: A2DP1.0, AVRCP1.5, AVDTP1.0, AVCTP1.4, HFP1.5, GAVDP1.0
Bluetooth speaker side
Bluetooth earbuds side
Tips:
- Put the earphones back into the charging case before use, and when take out the earbuds again, “L” and “R” earbuds will start pairing automatically. Or press the touch buttons of the “L” and “R” earbuds for 3 seconds, earbuds will automatically pair after power on.
- Turn on the Bluetooth of the mobile phone after “L” and “R” earbuds pairing successfully.
Function description
- When the binaural earbuds are taken out of the charging case, they will automatically complete the pairing with a prompt sound.
- Then it can be searched and connected by the mobile phone.
- After the connection is completed, there will be a success tone in both ears.
- At this time, it can be realized through the earbud’s touch button 4.1 Click to pause or play music 4.2 Double-click on the left ear to the previous song, and double-click on the right ear to the next song.
- Click on the call when you call, double-click the phone while calling.
- When put the earbuds back into the charging case, automatically sleep and start charging, the charging light turn to red and will turn off after fully charged.
- Battery indicator consists of 4 Led lights, each light point represents 25% power.
Brief Introduction of speaker function:
Long press the power button, the speaker can be searched for connection after
power on, and it will automatically power off after 3 minutes without
connection
Safety Instructions
- Please do not place the product near heaters, microwave ovens, rice cookers, pressure cookers and other heating equipment to prevent the product from overeating and causing a fire.
- Please do not drop or hit the product to avoid explosion.
- When used by children, please ensure normal operation under adult supervision.
- Do not use in a low temperature and humid environment, the normal use environment is 0-50℃.
- Do not disassemble or repair the product without authorization.
- Do not place the product within 20cm of medical equipment to prevent equipment interference.
- When not in use, please unplug the product charger from the socket to avoid consuming the battery life or causing damage.
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Raditation Exposure Statemen
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>